Phoenix Contact 1714875 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1714875 is a 32-position receptacle connector with 0.050" (1.27mm) pitch, designed for surface mount, right-angle board-to-board applications. This connector features gold-plated mating contacts, push-pull fastening, and operates across -55°C to 125°C. The part is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications.

Substiute Parts

1714875

Phoenix ContactIn Stock: 14431714875 Datasheet

Current PartRFQ

1337014

Phoenix ContactIn Stock: 13401337014 Datasheet

DirectRFQ

15250322601000

HARTINGIn Stock: 337315250322601000 Datasheet

SimilarRFQ

ESMC-F-32-SGR-SMT-T/R

Adam TechIn Stock: 1661ESMC-F-32-SGR-SMT-T/R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1714875 is determined by strict adherence to the following critical parameters:

Core Matching Criteria:

• Connector type: Receptacle
• Number of positions: 32
• Pitch - mating: 0.050" (1.27mm)
• Number of rows: 2
• Row spacing - mating: 0.050" (1.27mm)
• Mounting type: Surface mount, right angle
• Termination: Solder
• Fastening type: Push-pull
• Operating temperature range: -55°C ~ 125°C
• Material flammability rating: UL94 V-0
• Moisture sensitivity level: 1 (Unlimited)

The three substitute parts listed below meet these core criteria. Variations in secondary parameters such as current rating, contact finish thickness, insulation height, and contact shape do not preclude substitution when the core parameters align.

Parameter Comparison

Engineering Selection Recommendations

Phoenix Contact 1337014 is the primary direct substitute. It is manufactured by the same original equipment manufacturer, carries active product status, and maintains full compliance with ROHS3 standards. The insulation height variance of 0.001" (0.03mm) and increased current rating of 2.2A present no compatibility concerns for applications originally designed for the 1714875.

HARTING 15250322601000 is a functionally equivalent alternative from an established connector manufacturer. This part maintains all core electrical and mechanical parameters, operates within the same temperature range, and carries ROHS3 compliance with REACH unaffected status. The insulation height of 0.120" (3.05mm) represents a 0.030" (0.76mm) reduction compared to the main part; board layout verification is necessary to confirm clearance compatibility.

Adam Tech ESMC-F-32-SGR-SMT-T/R meets all core substitution criteria with active product status and ROHS3 compliance. The thermoplastic insulation material differs from the LCP used in the main part and substitutes; this material change does not affect electrical performance but may influence thermal cycling behavior in extreme temperature applications. The current rating of 1.2A is lower than the main part's 1.4A specification.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1337014 be used as a direct replacement for 1714875?

A: Yes. Both parts are manufactured by Phoenix Contact, share identical core electrical and mechanical specifications, and maintain the same operating temperature range and flammability rating. The 1337014 is the recommended primary substitute due to manufacturer continuity.

Q: What is the significance of the insulation height difference between the main part and HARTING 15250322601000?

A: The HARTING part has an insulation height of 0.120" (3.05mm) compared to 0.150" (3.81mm) for the main part. This 0.030" (0.76mm) reduction requires verification against board layout and mating connector specifications to ensure adequate clearance and proper seating.

Q: Are there differences in contact material between the substitutes?

A: Yes. The main part and Phoenix Contact 1337014 use copper alloy contacts, while HARTING 15250322601000 uses copper alloy and Adam Tech ESMC-F-32-SGR-SMT-T/R uses phosphor bronze. All three materials are suitable for the specified operating conditions and do not affect electrical compatibility.

Q: Does the thermoplastic insulation material in the Adam Tech part affect performance?

A: The Adam Tech ESMC-F-32-SGR-SMT-T/R uses thermoplastic insulation instead of liquid crystal polymer. Both materials meet UL94 V-0 flammability requirements and operate across -55°C to 125°C. Material selection may influence thermal cycling behavior in applications experiencing repeated extreme temperature transitions.

Q: What packaging formats are available for these substitutes?

A: Phoenix Contact 1337014 is supplied in Tape & Reel (TR) format. HARTING 15250322601000 is supplied in Tape & Reel (TR) format. Adam Tech ESMC-F-32-SGR-SMT-T/R is supplied in Cut Tape (CT) format. Packaging selection depends on production volume and assembly line requirements.

Q: Are all substitutes RoHS compliant?

A: Yes. The main part carries RoHS compliance status. All three substitutes carry ROHS3 compliance, which represents an enhanced version of the original RoHS directive. HARTING 15250322601000 and Adam Tech ESMC-F-32-SGR-SMT-T/R also carry REACH unaffected status.

Q: What is the current rating consideration when selecting a substitute?

A: The main part is rated at 1.4A. Phoenix Contact 1337014 is rated at 2.2A, providing higher current capacity. Adam Tech ESMC-F-32-SGR-SMT-T/R is rated at 1.2A, which is lower than the main part. HARTING 15250322601000 does not specify a current rating. Application current requirements must be evaluated against substitute ratings.