Amphenol CONEC 17-10020 Modular Coupler Connector

Part Overview

The Amphenol CONEC 17-10020 is an active-status modular coupler connector jack designed to convert 8p8c (RJ45) jack connections to 8p8c (RJ45) jack connections. This unshielded Cat5e coupler is engineered for industrial environments with IP67 ingress protection and circular threaded coupling. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the primary part is unavailable or when system specifications allow for alternative shielding configurations.

Substiute Parts

17-10020

Amphenol CONECIn Stock: 102617-10020 Datasheet

Current PartRFQ

17-10000

Amphenol CONECIn Stock: 237417-10000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Amphenol CONEC 17-10000 qualifies as a substitute for the 17-10020 based on the following preserved electrical and mechanical parameters:

• Identical pin configuration (8p8c / RJ45)
• Identical category rating (Cat5e)
• Identical connector type (Modular Coupler Jack-to-Jack)
• Identical ingress protection rating (IP67)
• Identical operating temperature range (-40°C ~ 85°C)
• Identical contact material and finish (Phosphor Bronze, 50.0µin Gold)
• Identical housing material (PBT, Glass Filled)
• Identical mounting type and features (Panel Mount, Bulkhead, Front Side Nut, Rear Side Nut)
• Identical compliance status (ROHS3 Compliant)

The primary distinction is the shielding configuration: the 17-10020 is unshielded while the 17-10000 is shielded. This difference permits substitution in applications where electromagnetic interference protection is acceptable or required by system specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the 17-10020 and 17-10000 maintain active product status and ROHS3 compliance. Selection between these parts depends on application requirements for electromagnetic shielding. The unshielded 17-10020 is suitable for standard industrial environments with minimal EMI concerns, while the shielded 17-10000 addresses applications requiring additional electromagnetic interference protection. Both parts support identical temperature ranges, contact materials, and mechanical specifications. Inventory availability should be considered: the 17-10000 (shielded variant) has higher stock availability at 2287 units compared to 998 units for the 17-10020.

Frequently Asked Questions (FAQ)

Q: Can the 17-10000 shielded coupler replace the 17-10020 unshielded coupler? A: Yes. Both parts maintain identical electrical ratings (Cat5e), mechanical dimensions (RJ45 8p8c jack-to-jack configuration), operating temperature ranges (-40°C ~ 85°C), and mounting specifications. The shielded variant provides additional electromagnetic interference protection without altering form factor or performance parameters.

Q: What is the primary difference between these two couplers? A: The 17-10020 is unshielded while the 17-10000 includes shielding. All other electrical, mechanical, and compliance specifications remain identical.

Q: Are both parts suitable for industrial environments? A: Yes. Both the 17-10020 and 17-10000 are rated for industrial environments with IP67 ingress protection (dust tight and waterproof), circular threaded coupling, and operating temperatures from -40°C to 85°C.

Q: Does shielding affect the physical mounting of these couplers? A: No. Both parts utilize identical panel mount, bulkhead mounting with front side nuts and rear side nuts. Mechanical interfaces are unchanged between the shielded and unshielded variants.

Q: What is the difference in packaging between these parts? A: The 17-10020 is supplied in bag packaging while the 17-10000 is supplied in bulk packaging. This distinction affects ordering and handling but not technical specifications or functionality.

Q: Are both parts ROHS3 compliant? A: Yes. Both the 17-10020 and 17-10000 are ROHS3 compliant with REACH unaffected status.