TE Connectivity 170604-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 170604-1 is a 0.250" (6.35mm) Quick Connect Female Crimp Connector designed for 14-16 AWG wire gauges with non-mating end insulation. This terminal is part of the Faston series and is classified as obsolete. Due to its obsolete product status, identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for ongoing production, repair, and maintenance applications.

Substiute Parts

170604-1

TE Connectivity AMP ConnectorsIn Stock: 927170604-1 Datasheet

Current PartRFQ

DV14-250B-C

Panduit CorpIn Stock: 2410DV14-250B-C Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 170604-1 are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Tab Width: 0.250" (6.35mm)
• Tab Thickness: 0.032" (0.81mm)
• Wire Gauge: 14-16 AWG
• Gender: Female
• Termination: Crimp
• Insulation: Non-Mating End Insulated
• Contact Material: Brass
• Contact Finish: Tin
• Mounting Type: Free Hanging (In-Line)
• RoHS Compliance: ROHS3 Compliant

The Panduit Corp DV14-250B-C meets all critical electrical and mechanical parameters required for direct substitution. Both connectors share identical tab dimensions, wire gauge compatibility, contact materials, and environmental compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The Panduit Corp DV14-250B-C is a direct functional equivalent to the TE Connectivity 170604-1. Selection of this substitute part is based on the following engineering factors:

Compliance and Certification: Both parts maintain ROHS3 compliance, ensuring regulatory alignment for applications subject to environmental restrictions. The substitute part carries active product status, providing long-term availability and supply chain stability compared to the obsolete original part.

Electrical and Mechanical Compatibility: All critical electrical parameters—tab width, tab thickness, wire gauge, contact material, and contact finish—are identical between the two parts. Mechanical dimensions fall within acceptable tolerances for connector mating and installation applications.

Termination and Insulation: Both parts utilize crimp termination with non-mating end insulation, maintaining functional equivalence in circuit assembly and protection characteristics.

The Panduit DV14-250B-C is suitable for direct replacement in applications currently using the TE Connectivity 170604-1, with no design modifications required.

Frequently Asked Questions (FAQ)

Q: Can the Panduit DV14-250B-C be used as a direct replacement for the TE Connectivity 170604-1?

A: Yes. The Panduit DV14-250B-C meets all critical electrical and mechanical parameters of the TE Connectivity 170604-1, including tab dimensions, wire gauge compatibility, contact materials, and insulation specifications. Direct substitution is supported without design changes.

Q: What is the significance of the tab width and thickness specifications?

A: Tab width (0.250") and tab thickness (0.032") determine the physical mating interface with corresponding male connectors. Both parts share identical specifications, ensuring mechanical compatibility with existing mating connectors and receptacles.

Q: Are there differences in overall length between these parts?

A: The TE Connectivity 170604-1 has an overall length of 0.839" (21.30mm), while the Panduit DV14-250B-C measures 0.810" (20.57mm). This 0.029" (0.73mm) difference falls within acceptable mechanical tolerances and does not affect functional performance or mating characteristics.

Q: What does "Non-Mating End Insulated" mean?

A: Non-mating end insulation refers to insulation applied to the wire termination end of the connector, providing electrical protection and strain relief at the crimp point. Both parts incorporate this feature identically.

Q: Why is the substitute part listed as "Active" while the original is "Obsolete"?

A: The TE Connectivity 170604-1 has reached end-of-life status and is no longer manufactured. The Panduit DV14-250B-C remains in active production, ensuring continued availability and supply chain support for applications requiring this connector type.

Q: Are both parts RoHS compliant?

A: Yes. Both the TE Connectivity 170604-1 and Panduit DV14-250B-C are ROHS3 compliant, meeting environmental and regulatory requirements for restricted substance use.

Q: What is the wire gauge range for these connectors?

A: Both connectors are rated for 14-16 AWG wire gauges. This range defines the acceptable wire diameter for proper crimp termination and electrical contact.