Phoenix Contact 1702934 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1702934 is a 6-position terminal block header with female sockets designed for front panel wire connection and PCB pin rear panel mounting. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The part operates at 600V UL voltage rating with 5A current capacity and features threaded mating lock and shield connection feedthrough capabilities.

Substiute Parts

1702934

Phoenix ContactIn Stock: 8721702934 Datasheet

Current PartRFQ

1702536

Phoenix ContactIn Stock: 8821702536 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1702934 is determined by the following critical parameters:

• Electrical Specifications: Voltage rating (600V UL) and current capacity (5A) must be maintained
• Mechanical Configuration: 6 positions per level with 0.400" (10.16mm) pitch spacing
• Connection Type: Header with female sockets for front panel and PCB pins right angle for rear panel mounting
• Panel Mounting: Snap lock mechanism with compatible panel thickness range (0.039 ~ 0.118")
• Series Compatibility: COMBICON DFK-IPC series designation
• Compliance: RoHS compliance status

The substitute part 1702536 maintains all critical electrical and mechanical parameters while offering an active product status alternative to the obsolete 1702934.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1702536 serves as the direct substitute for the obsolete 1702934 terminal block header. Both components maintain identical electrical ratings (600V UL, 5A), mechanical configuration (6 positions, 0.400" pitch), and connection specifications. The 1702536 is classified as an active product with current manufacturing support and RoHS compliance certification, providing supply chain continuity for applications requiring 6-position COMBICON DFK-IPC series terminal blocks with female socket headers and right-angle PCB pin mounting.

The primary distinction between the two parts is product lifecycle status: the 1702934 is obsolete while the 1702536 remains in active production. Both components are suitable for panel thicknesses between 0.039" and 0.118" (1.0 to 3.0mm) and support identical electrical and mechanical interface requirements.

Frequently Asked Questions (FAQ)

Q: Can the 1702536 directly replace the 1702934 in existing applications?

A: Yes. Both parts maintain identical electrical specifications (600V UL, 5A), mechanical pitch (0.400"), position count (6), and connection types (female socket headers with right-angle PCB pins). The 1702536 is the active production equivalent.

Q: What is the difference between the panel mount types listed for each part?

A: The 1702934 specifies "2 Piece, Snap Lock - Front Flange" while the 1702536 specifies "2 Piece, Snap Lock." Both employ snap lock mechanisms compatible with the same panel thickness range (0.039 ~ 0.118").

Q: Are both parts RoHS compliant?

A: Yes. Both the 1702934 and 1702536 are RoHS compliant components.

Q: Why is the 1702934 classified as obsolete?

A: The 1702934 has been discontinued by Phoenix Contact. The 1702536 represents the active production alternative within the COMBICON DFK-IPC series.

Q: What panel thickness range is supported by the 1702536?

A: The 1702536 supports panel thicknesses from 0.039" to 0.118" (1.0 to 3.0mm), matching the specification of the 1702934.

Q: Are the electrical ratings identical between both parts?

A: Yes. Both components are rated for 600V UL voltage and 5A current capacity.