Phoenix Contact 1702882 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1702882 is a 9-position terminal block header with female sockets designed for front panel wire connection and PCB pin rear connection. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The part operates at 600V UL voltage rating with 5A current capacity and features threaded mating lock and shield connection on the front side.

Substiute Parts

1702882

Phoenix ContactIn Stock: 10041702882 Datasheet

Current PartRFQ

1702565

Phoenix ContactIn Stock: 8181702565 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1702882 is determined by the following critical parameters:

• Electrical Compatibility: Voltage rating (600V UL) and current capacity (5A) must be maintained or exceeded
• Mechanical Configuration: 9 positions per level with 0.400" (10.16mm) pitch spacing
• Connection Type: Female socket front panel connection with right-angle PCB pin rear connection
• Environmental Compliance: RoHS compliance and MSL rating of 1 (Unlimited)
• Series Compatibility: COMBICON DFK-IPC series designation

The substitute part 1702565 meets all critical electrical and mechanical parameters required for functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1702565 serves as the active equivalent for the obsolete 1702882. Both components maintain identical electrical specifications (600V UL, 5A), mechanical configuration (9 positions, 0.400" pitch), and environmental compliance ratings (RoHS compliant, MSL 1). The 1702565 is currently in active production status with 799 units in stock, providing supply continuity for applications requiring this terminal block header configuration.

The primary difference between the two parts is the panel mount type designation: the 1702882 specifies "2 Piece, Snap Lock - Front Flange" while the 1702565 specifies "2 Piece, Snap Lock." This distinction does not affect electrical or functional compatibility within the COMBICON DFK-IPC series framework.

Frequently Asked Questions (FAQ)

Q: Can the 1702565 directly replace the 1702882 in existing applications?

A: Yes. Both parts share identical electrical ratings (600V UL, 5A), mechanical pitch (0.400"), position count (9), and connection types (female socket front, right-angle PCB pin rear). The 1702565 is the active production equivalent.

Q: What is the significance of the panel mount type difference?

A: The 1702882 includes "Front Flange" in its panel mount designation, while the 1702565 does not. Both utilize 2-piece snap lock mounting within the COMBICON DFK-IPC series. This specification difference does not impact electrical or mechanical compatibility.

Q: Are there any compliance or environmental differences between these parts?

A: No. Both parts are RoHS compliant with MSL rating of 1 (Unlimited), ensuring equivalent environmental performance and regulatory compliance.

Q: What is the current availability status?

A: The 1702882 is obsolete. The 1702565 is active production with 799 units in stock, providing reliable supply for new designs and replacements.

Q: Are both parts from the same manufacturer and series?

A: Yes. Both are Phoenix Contact components within the COMBICON DFK-IPC series, ensuring design consistency and interchangeability within this product line.