Phoenix Contact 1702316 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1702316 is an 8-position terminal block header with male pins designed for PCB mounting applications. This component features a green color designation, straight PCB pin configuration, and snap-lock front flange mounting. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations where legacy compatibility is required.

Substiute Parts

1702316

Phoenix ContactIn Stock: 7931702316 Datasheet

Current PartRFQ

1701595

Phoenix ContactIn Stock: 11511701595 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1702316 is determined by the following critical parameters:

• Electrical Compatibility: Voltage rating (600 V UL) and current rating must meet or exceed application requirements
• Physical Configuration: 8-position count, 0.400" (10.16mm) pitch, and snap-lock front flange mounting must remain consistent
• Connector Type: Male pin header configuration with green color designation
• Panel Mounting: 2-piece snap-lock front flange design
• Compliance: RoHS compliance status and moisture sensitivity level (MSL 1)

The Phoenix Contact 1701595 qualifies as a functional substitute based on matching electrical voltage rating, position count, pitch, mounting type, and compliance certifications. The primary distinction lies in the rear panel wire connection configuration (right-angle versus straight) and current rating differential.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1701595 represents the primary active-status equivalent for the obsolete 1702316 model. Selection between these components depends on PCB layout requirements and current capacity needs:

1702316 (Obsolete): Straight PCB pin configuration with 5 A current rating. Suitable for legacy system repairs where original form factor must be maintained and current requirements do not exceed 5 A.

1701595 (Active): Right-angle PCB pin configuration with 66 A current rating. Recommended for new designs and system upgrades. The elevated current rating provides design margin for higher-power applications. The right-angle pin orientation accommodates different PCB layout geometries compared to the straight-pin predecessor.

Both components maintain identical electrical voltage specifications (600 V UL), position count (8), pitch (10.16mm), mounting methodology (snap-lock front flange), and compliance certifications (RoHS, MSL 1). Physical width and panel thickness tolerances are equivalent across both models.

Frequently Asked Questions (FAQ)

Q: Can the 1701595 directly replace the 1702316 in existing assemblies?

A: Electrical and mechanical compatibility is confirmed for voltage, current (1701595 exceeds 1702316 rating), position count, pitch, and mounting type. The primary consideration is PCB pin orientation: 1702316 uses straight pins while 1701595 uses right-angle pins. PCB layout must accommodate the different pin geometry.

Q: What is the significance of the current rating difference (5 A versus 66 A)?

A: The 1702316 is rated for 5 A maximum current per UL specifications. The 1701595 supports 66 A, providing substantially higher current capacity. Applications requiring current levels between 5 A and 66 A must use the 1701595. Applications operating below 5 A can use either component.

Q: Why is the 1702316 classified as obsolete?

A: Product status reflects Phoenix Contact's manufacturing and support decisions. The active 1701595 model provides equivalent or superior electrical performance with enhanced current capacity, making it the recommended choice for ongoing procurement.

Q: Are there packaging differences between these components?

A: The 1702316 packaging specification is not provided in available data. The 1701595 is supplied in bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: Do both components meet the same compliance standards?

A: Yes. Both the 1702316 and 1701595 are RoHS compliant with MSL 1 (unlimited moisture sensitivity level), ECCN EAR99, and HTSUS 8536.69.4040 classification.

Q: What is the difference between the COMBICON DFK-PCV and DFK-PC series designations?

A: Series designation reflects Phoenix Contact's product line classification. The DFK-PCV series (1702316) and DFK-PC series (1701595) are distinct product lines within the COMBICON terminal block family. The DFK-PC series represents the current active product line.