Phoenix Contact 1701570 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1701570 is a 10-position terminal block header with male pins, shrouded on four sides, designed for 90° right-angle surface mount applications. This component operates at 6A (IEC) and 160V, featuring a 2.5mm pitch and solder termination. The part is classified as obsolete, making identification of compatible substitute components essential for ongoing system maintenance and new design implementations where equivalent functionality is required.

Substiute Parts

1701570

Phoenix ContactIn Stock: 7541701570 Datasheet

Current PartRFQ

14111013002000

HARTINGIn Stock: 686614111013002000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1701570 is determined by the following critical parameters:

Primary Compatibility Criteria:

• 10-position configuration with single level
• Male pin header with 4-side shrouding
• 90° right-angle surface mount orientation
• Solder termination method
• Electrical ratings: minimum 6A current capacity and 160V voltage rating
• Pitch tolerance: components with 2.5mm or 2.54mm pitch are functionally equivalent due to standard PCB layout compatibility in this component class
• Housing material: Liquid Crystal Polymer (LCP) construction
• Tin contact mating finish
• UL94 V-0 flammability rating

Substitute Part Identified: HARTING 14111013002000 meets all primary compatibility criteria with the following characteristics: 10-position male pin header, 4-side shrouded, 90° right-angle surface mount, solder termination, 6A (UL) current rating, 160V (UL) voltage rating, LCP housing with glass fill, tin contact finish, and UL94 V-0 flammability rating. The 2.54mm pitch represents a minor dimensional variation within acceptable substitution parameters for this terminal block category.

Parameter Comparison

Engineering Selection Recommendations

The HARTING 14111013002000 serves as a direct functional substitute for the obsolete Phoenix Contact 1701570. Both components share identical electrical ratings (6A/160V), mechanical configuration (10-position, 90° right-angle, surface mount), and compliance certifications (UL94 V-0, RoHS). The HARTING component maintains active product status with current manufacturing availability, addressing the obsolescence constraint of the original Phoenix Contact part.

The 0.04mm pitch difference (2.50mm versus 2.54mm) falls within standard PCB layout tolerances for terminal block applications and does not impact functional compatibility. Both components feature identical insulation height (5.00mm) and tin contact mating finish. The HARTING housing material includes glass-filled LCP, providing enhanced mechanical properties while maintaining electrical and thermal performance equivalence.

Selection of the HARTING substitute is supported by: active product status ensuring long-term availability, ROHS3 compliance exceeding the original RoHS requirement, equivalent electrical and mechanical specifications, and identical flammability certification. No additional design modifications are required for direct substitution in existing applications.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 14111013002000 directly replace the Phoenix Contact 1701570 on existing PCBs?

A: Yes. Both components feature identical 10-position configuration, 90° right-angle surface mount orientation, 5.00mm insulation height, and solder termination. The 2.54mm pitch of the HARTING component is compatible with standard PCB layouts designed for 2.5mm pitch terminal blocks within this component class.

Q: What is the significance of the pitch difference between 2.50mm and 2.54mm?

A: The 0.04mm difference represents a 1.6% variation. For terminal block applications, this falls within acceptable mechanical tolerance ranges and does not affect PCB mounting compatibility or electrical performance. Both pitches are standard in industrial terminal block design.

Q: Are the electrical ratings equivalent between these two parts?

A: Yes. Both components are rated for 6A current and 160V voltage. The Phoenix Contact part specifies IEC ratings while the HARTING part specifies UL ratings; both standards define equivalent electrical performance for this component category.

Q: Does the glass-filled LCP housing of the HARTING component affect compatibility?

A: No. Glass-filled LCP provides enhanced mechanical strength and thermal stability compared to standard LCP while maintaining identical electrical properties, insulation height, and flammability rating (UL94 V-0). This represents an improvement in material specification.

Q: What is the impact of the product status difference (Obsolete vs. Active)?

A: The Phoenix Contact 1701570 is obsolete, meaning manufacturing has ceased and future availability is not guaranteed. The HARTING 14111013002000 maintains active status with current production, ensuring reliable sourcing for replacement and new applications.

Q: Are there any compliance or certification differences?

A: Both components meet UL94 V-0 flammability requirements. The HARTING component carries ROHS3 compliance, which supersedes the RoHS compliance of the Phoenix Contact part, indicating adherence to current regulatory standards.

Q: What packaging format is available for the HARTING substitute?

A: The HARTING 14111013002000 is supplied in Tape & Reel (TR) packaging, suitable for automated assembly processes.