Phoenix Contact 1690118 Heavy Duty Connector Hood - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1690118 is a heavy duty connector hood designed for top entry applications with M32 thread size and B10 configuration. This connector provides IP65/IP68/IP69K ingress protection suitable for dust-tight and waterproof environments with salt water resistance. The part is currently listed as obsolete, making identification of compatible substitute components essential for ongoing system maintenance and new installations where equivalent functionality is required.

Substiute Parts

1690118

Phoenix ContactIn Stock: 7591690118 Datasheet

Current PartRFQ

1420909

Phoenix ContactIn Stock: 9231420909 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of heavy duty connector hoods is determined by strict equivalence across the following critical parameters:

• Connector Type & Style: Hood configuration with top entry design
• Size Designation: B10 size class
• Thread Interface: M32 thread size for mounting compatibility
• Lock Mechanism: Screw locks on hood for consistent assembly
• Ingress Protection Rating: IP65 minimum with IP68/IP69K capability for environmental sealing
• Housing Material & Construction: Aluminum die cast with powder coat finish
• Operating Temperature: -40°C to 125°C range
• Series Compatibility: HEAVYCON-ADVANCE® product line

The substitute part Phoenix Contact 1420909 maintains equivalence across all critical mechanical and electrical parameters while offering improved product status and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1420909 is the direct substitute for obsolete part 1690118. Both components share identical mechanical interfaces (M32 thread, B10 size, top entry hood configuration) and equivalent environmental protection ratings. The 1420909 offers the advantage of active product status with current availability and ROHS3 compliance certification, compared to the obsolete status of 1690118. The ingress protection upgrade from IP65 to IP66 in the substitute part provides enhanced dust protection while maintaining full IP68/IP69K waterproof capability. Both parts operate across the identical temperature range and utilize equivalent aluminum die cast housing with powder coat finish and salt water resistance.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1420909 directly replace 1690118 in existing installations?

A: Yes. Both parts maintain identical mechanical interfaces including M32 thread size, B10 size designation, top entry hood style, and screw lock mechanism. The substitute part is mechanically and functionally equivalent for all mounting and sealing applications.

Q: What is the difference in ingress protection ratings between these parts?

A: The main part 1690118 is rated IP65/IP68/IP69K, while substitute 1420909 is rated IP66/IP68/IP69K. IP66 provides enhanced dust protection compared to IP65. Both maintain equivalent water resistance at IP68/IP69K levels.

Q: Are there dimensional differences between these connector hoods?

A: The height dimension differs slightly: 1690118 measures 3.937" H (100.00mm), while 1420909 measures 3.689" H (93.70mm). Length and width dimensions remain identical at 4.134" L x 2.244" W (105.00mm x 57.00mm). Verify mounting clearance in your specific application.

Q: What compliance certifications apply to the substitute part?

A: Phoenix Contact 1420909 carries ROHS3 compliance certification and REACH Unaffected status. Both parts are classified under ECCN EAR99 and HTSUS 8538.90.8180.

Q: Why is the original part listed as obsolete?

A: Product 1690118 has been discontinued by Phoenix Contact. The active substitute 1420909 provides equivalent functionality with current manufacturing support and improved compliance certifications.

Q: What is the packaging difference between these parts?

A: Part 1690118 is supplied with unspecified packaging, while 1420909 is supplied in bulk packaging. Confirm packaging requirements for your procurement process.