Equivalent & Substitute Parts for 168154K50A-F

Part Overview

The 168154K50A-F is a 0.15 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE) with a 50V DC voltage rating and ±10% tolerance. This radial through-hole component utilizes polyester metallized dielectric technology and operates across the temperature range of -55°C to 125°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts become necessary when the original specification requires higher voltage ratings, improved tolerance specifications, automotive-grade certifications, or alternative packaging formats while maintaining the same capacitance value and core electrical characteristics.

Key Parameters

Parameter	Value	Significance for Substitution
Capacitance	0.15 µF	Must remain identical across all substitutes
Voltage Rating - DC	50V	Substitutes must equal or exceed this rating
Tolerance	±10%	Substitutes may have equal or tighter tolerance
Dielectric Material	Polyester, Metallized	Must be polyester-based film technology
Mounting Type	Through Hole Radial	Physical form factor for PCB compatibility
Operating Temperature	-55°C ~ 125°C	Substitutes must support this range
Lead Spacing	0.197" (5.00mm)	Critical for PCB footprint compatibility
RoHS Status	ROHS3 Compliant	Environmental compliance requirement

Substitute Part Grouping Explanation

Substitution logic for the 168154K50A-F is based on the following allowed parameters:

Capacitance Requirement: All substitutes maintain 0.15 µF capacitance value without deviation.

Voltage Rating Compatibility: Substitute parts must have DC voltage ratings equal to or greater than 50V. This includes 63V and 100V rated options, which provide enhanced voltage margin for circuit protection.

Tolerance Specification: The original ±10% tolerance can be replaced with ±5% tolerance substitutes, representing an improvement in capacitance accuracy. Tolerance cannot be relaxed beyond ±10%.

Dielectric Technology: All substitutes utilize polyester-based film dielectric (polyester or polyethylene terephthalate/PET) with metallized construction, maintaining electrical performance characteristics.

Physical Form Factor: All substitutes are radial through-hole components with 0.197" (5.00mm) lead spacing, ensuring direct PCB footprint compatibility.

Temperature Range: All substitutes support the -55°C to 125°C operating temperature range.

Compliance Standards: All substitutes maintain ROHS3 compliance. EPCOS substitutes include AEC-Q200 automotive qualification, which is an additional certification not present in the original part.

Packaging Options: Substitutes are available in Bulk and Cut Tape (CT) packaging formats to accommodate different procurement and assembly workflows.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Tolerance	Voltage DC	Voltage AC	Size (mm)	Height (mm)	Packaging	Inventory
168154K50A-F	CDE	0.15 µF	±10%	50V	30V	7.20 x 2.50	6.50	Bulk	733 Pcs
168154J63C-F	CDE	0.15 µF	±5%	63V	40V	7.20 x 3.50	7.50	Bulk	5802 Pcs
B32529C0154J000	EPCOS - TDK	0.15 µF	±5%	63V	40V	7.30 x 2.50	6.50	Bulk	3779 Pcs
B32529C0154J289	EPCOS - TDK	0.15 µF	±5%	63V	40V	7.30 x 2.50	6.50	Cut Tape	11184 Pcs
B32529C0154K000	EPCOS - TDK	0.15 µF	±10%	63V	40V	7.30 x 2.50	6.50	Bulk	7462 Pcs
B32529C0154K289	EPCOS - TDK	0.15 µF	±10%	63V	40V	7.30 x 2.50	6.50	Cut Tape	13387 Pcs
B32529C1154J000	EPCOS - TDK	0.15 µF	±5%	100V	63V	7.30 x 3.00	6.50	Bulk	7732 Pcs

Engineering Selection Recommendations

Direct Replacement (Same Voltage Rating): No substitute parts maintain the exact 50V DC rating. All available substitutes provide higher voltage ratings (63V or 100V), which are electrically compatible with 50V circuit requirements.

CDE 168154J63C-F Selection: This part maintains manufacturer continuity with the original 168154K50A-F. It provides 63V DC rating with improved ±5% tolerance. Physical dimensions increase slightly in width (3.50mm vs 2.50mm) and height (7.50mm vs 6.50mm), requiring PCB layout verification. Lead spacing remains compatible at 5.00mm. Bulk packaging format matches the original specification.

EPCOS B32529C Series Selection: The B32529C series offers multiple voltage and tolerance combinations with AEC-Q200 automotive qualification. These parts maintain the 5.00mm lead spacing and are available in both Bulk and Cut Tape packaging. Physical dimensions are comparable to the original part (7.30mm length, 2.50mm width for most variants). All EPCOS substitutes are ROHS3 compliant and support the -55°C to 125°C temperature range.

Tolerance Consideration: Parts with ±5% tolerance (168154J63C-F, B32529C0154J000, B32529C0154J289, B32529C1154J000) provide improved capacitance accuracy compared to the original ±10% specification. This represents a performance enhancement suitable for precision circuit applications.

Voltage Rating Selection: 63V-rated substitutes (168154J63C-F, B32529C0154J000, B32529C0154J289, B32529C0154K000, B32529C0154K289) provide 26% voltage margin above the original 50V specification. The 100V-rated B32529C1154J000 provides 100% voltage margin, suitable for applications requiring enhanced reliability or operating in elevated voltage stress conditions.

Packaging Format: Cut Tape (CT) variants (B32529C0154J289, B32529C0154K289) are suitable for automated assembly processes. Bulk packaging variants are appropriate for manual assembly or lower-volume production runs.

Frequently Asked Questions (FAQ)

Q: Can I use a 63V-rated capacitor in place of a 50V-rated capacitor?

A: Yes. A higher voltage rating indicates the component can withstand greater electrical stress. A 63V-rated capacitor operates safely in a 50V circuit with additional voltage margin. This is a standard engineering practice for component substitution.

Q: What is the difference between ±5% and ±10% tolerance?

A: Tolerance specifies the allowable deviation from the nominal 0.15 µF capacitance value. ±10% allows deviation from 0.135 µF to 0.165 µF. ±5% allows deviation from 0.1425 µF to 0.1575 µF. Tighter tolerance (±5%) provides more precise capacitance values, beneficial for circuits requiring accurate filtering or timing characteristics.

Q: Are the physical dimensions of substitute parts compatible with my PCB?

A: Lead spacing of 5.00mm (0.197") is identical across all parts, ensuring footprint compatibility. However, body dimensions vary. The original 168154K50A-F measures 7.20mm x 2.50mm. The CDE 168154J63C-F measures 7.20mm x 3.50mm (wider). EPCOS B32529C parts measure 7.30mm x 2.50mm (slightly longer, same width). Verify PCB layout clearances before substitution.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive qualification standard indicating the component meets reliability and performance requirements for automotive applications. EPCOS B32529C series parts carry this certification. The original 168154K50A-F does not. This certification is not required for general-purpose applications but indicates enhanced quality assurance.

Q: Can I substitute between Bulk and Cut Tape packaging?

A: Bulk and Cut Tape packaging formats contain identical electrical components. The difference is procurement and handling format. Bulk packaging is suitable for manual assembly or lower-volume orders. Cut Tape packaging is optimized for automated pick-and-place assembly equipment. Selection depends on manufacturing process requirements, not electrical compatibility.

Q: Which substitute offers the best overall compatibility?

A: B32529C0154K000 or B32529C0154K289 provide optimal compatibility. Both maintain ±10% tolerance matching the original specification, offer 63V rating with adequate voltage margin, support identical lead spacing (5.00mm), and maintain comparable physical dimensions (7.30mm x 2.50mm). The K289 variant in Cut Tape format is suitable for automated assembly; the K000 variant in Bulk format is suitable for manual assembly.

Q: Are all substitutes ROHS3 compliant?

A: Yes. The original 168154K50A-F and all listed substitute parts are ROHS3 compliant, meeting environmental and hazardous substance restrictions for electronic components.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message