168153J100A-F Film Capacitor Equivalent & Substitute Parts

Part Overview

The 168153J100A-F is a 0.015 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE) with a 100V DC voltage rating and ±5% tolerance. The component features a polyester metallized dielectric in a through-hole radial package configuration, designed for general-purpose applications across an operating temperature range of -55°C to 125°C. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), making it suitable for long-term use in standard industrial and commercial applications.

Identifying equivalent and substitute parts becomes necessary when the original component becomes unavailable, requires alternative sourcing to optimize supply chain efficiency, or when design specifications permit upgraded electrical ratings for enhanced reliability margins.

Substiute Parts

168153J100A-F

Cornell Dubilier Electronics (CDE)In Stock: 908168153J100A-F Datasheet

Current PartRFQ

B32529C1153J000

EPCOS - TDK ElectronicsIn Stock: 5643B32529C1153J000 Datasheet

DirectRFQ

B32529C3153J000

EPCOS - TDK ElectronicsIn Stock: 3334B32529C3153J000 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 168153J100A-F is determined by the following critical parameters:

Direct Electrical Compatibility (Same Rating Category):

• Capacitance: 0.015 µF (must be identical)
• Voltage Rating (DC): 100V minimum (equal or higher ratings are acceptable)
• Tolerance: ±5% (matches specification)
• Dielectric Material: Polyester metallized composition required
• Operating Temperature Range: -55°C to 125°C minimum coverage

Mechanical and Physical Compatibility:

• Mounting Type: Through Hole
• Package Configuration: Radial
• Lead Spacing: 0.197" (5.00mm) pin pitch
• Termination Style: PC Pins

Regulatory and Quality Compliance:

• RoHS3 Compliance required
• Product Status: Active designation

The substitute parts B32529C1153J000 (direct equivalent) and B32529C3153J000 (upgraded variant) satisfy all electrical, mechanical, and regulatory requirements. The B32529C1153J000 maintains identical voltage and capacitance specifications. The B32529C3153J000 represents an upgraded option with 250V DC rating while maintaining all other core specifications, providing enhanced voltage headroom for applications where additional safety margin is beneficial.

Parameter Comparison

Engineering Selection Recommendations

B32529C1153J000 Selection Criteria: The B32529C1153J000 qualifies as a direct electrical and mechanical equivalent to the 168153J100A-F. Both components share identical capacitance (0.015 µF), voltage rating (100V DC), tolerance (±5%), and operating temperature specifications (-55°C to 125°C). The part maintains ROHS3 compliance with Active product status. The B32529C1153J000 carries AEC-Q200 automotive qualification and belongs to the B3252 MKT general-purpose series from EPCOS-TDK Electronics. Physical dimensions remain compatible with printed circuit board layouts designed for the original specification, with negligible length variance (7.30mm versus 7.20mm) within standard component placement tolerances. This substitute part offers 5603 units in current inventory availability.

B32529C3153J000 Selection Criteria: The B32529C3153J000 represents an upgraded substitute with enhanced voltage specifications (250V DC / 160V AC) while maintaining identical capacitance, tolerance, and temperature range. The elevated voltage rating provides design margin benefits in applications subject to transient overvoltage conditions or where reliability enhancement is specified. This variant preserves ROHS3 compliance and Active product status with AEC-Q200 automotive qualification. Physical compatibility remains established through matching lead spacing (0.197"), termination style (PC Pins), and seated height (6.50mm maximum). The B32529C3153J000 maintains 3272 units in current inventory availability.

Both EPCOS-TDK substitutes deliver equivalent functional performance within their specified electrical operating parameters and maintain regulatory compliance applicable to the original Cornell Dubilier component.

Frequently Asked Questions (FAQ)

Q1: Can B32529C1153J000 directly replace the 168153J100A-F without PCB layout modification?

The B32529C1153J000 shares identical lead spacing (0.197" / 5.00mm), termination type (PC Pins), and mounted height (6.50mm maximum). The length increase of 0.004" (0.10mm) from 7.20mm to 7.30mm falls within standard component placement clearances on most circuit board designs. Direct substitution is electrically and mechanically compatible without layout revision requirements.

Q2: What is the primary advantage of selecting B32529C3153J000 over the direct equivalent B32529C1153J000?

The B32529C3153J000 operates at 250V DC rating compared to 100V DC on both the original and direct equivalent. Selection of the upgraded voltage variant introduces design margin for applications experiencing voltage transients, supply variations, or where circuit protection strategies require voltage headroom above nominal operating conditions.

Q3: Are all three components qualified for automotive applications?

The original 168153J100A-F carries general-purpose application classification. Both EPCOS-TDK substitutes (B32529C1153J000 and B32529C3153J000) include AEC-Q200 automotive qualification and specify automotive applications within their technical documentation, making them suitable for automotive-grade circuit designs.

Q4: Do all substitute parts maintain ROHS3 compliance?

Both B32529C1153J000 and B32529C3153J000 carry ROHS3 Compliant designation. All three components meet REACH Unaffected status, establishing regulatory equivalency for environmental and hazardous substance requirements.

Q5: What capacitance tolerance applies across all three parts?

All three components maintain ±5% capacitance tolerance. This specification ensures consistent circuit behavior across the component production range and eliminates tolerance-based selection differentiation.

Q6: Are physical dimensions otherwise identical between the three parts?

The 168153J100A-F measures 0.283" length (7.20mm), while both EPCOS-TDK substitutes measure 0.287" length (7.30mm). Width, seated height, and lead spacing remain identical across all three components. The minor length variance does not affect mechanical compatibility on standard circuit board layouts.

Q7: What operational temperature range applies to all substitute options?

All three components specify -55°C to 125°C operating temperature coverage, establishing thermal equivalency across the original and substitute product selection.