Equivalent & Substitute Parts for 168152K100A-F

Part Overview

The 168152K100A-F is a 1500 pF film capacitor manufactured by Cornell Dubilier Electronics (CDE) in the 168 series. This radial through-hole component features polyester metallized dielectric construction with a ±10% tolerance and 100V DC voltage rating. The part is Active in product status and maintains full RoHS3 compliance with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to address applications requiring tighter tolerance specifications, higher voltage ratings, or alternative manufacturer sourcing while maintaining core electrical and mechanical compatibility.

Substiute Parts

168152K100A-F

Cornell Dubilier Electronics (CDE)In Stock: 1068168152K100A-F Datasheet

Current PartRFQ

168152J100A-F

Cornell Dubilier Electronics (CDE)In Stock: 2175168152J100A-F Datasheet

UpgradeRFQ

B32529C1152J000

EPCOS - TDK ElectronicsIn Stock: 1326B32529C1152J000 Datasheet

UpgradeRFQ

B32529C3152J000

EPCOS - TDK ElectronicsIn Stock: 8873B32529C3152J000 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the 168152K100A-F is based on the following allowed parameters:

Primary Substitution Criteria:

• Capacitance value must equal 1500 pF (no deviation)
• Voltage rating must be ≥100V DC (equal or higher acceptable)
• Dielectric material must be polyester-based metallized film
• Operating temperature range must encompass -55°C ~ 125°C
• Mounting type must remain through-hole radial
• Lead spacing must be 0.197" (5.00mm)
• RoHS3 compliance required

Tolerance Consideration: The main part specifies ±10% tolerance. Substitute parts with ±5% tolerance provide improved circuit accuracy and are electrically compatible as a direct upgrade.

Voltage Rating Consideration: The main part is rated 100V DC. Substitute parts rated at 100V DC or higher (such as 250V DC) are mechanically and electrically compatible, with higher ratings providing additional design margin.

Manufacturer Variation: CDE and EPCOS-TDK Electronics parts meeting the above criteria are functionally equivalent within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

168152J100A-F (CDE Upgrade) This part is a direct CDE series upgrade from the main part, maintaining identical voltage rating (100V DC) and physical dimensions while providing improved tolerance specification (±5% versus ±10%). Selection is appropriate for applications requiring tighter capacitance accuracy within the same manufacturer ecosystem. Product status is Active with full RoHS3 compliance.

B32529C1152J000 (EPCOS-TDK, 100V Rating) This EPCOS-TDK part maintains the 100V DC voltage rating and provides ±5% tolerance with polyester PET metallized stacked dielectric construction. Physical dimensions are marginally larger (0.287" L versus 0.283" L) but remain within radial through-hole compatibility. AEC-Q200 automotive rating is included. Product status is Active with full RoHS3 compliance. Selection is appropriate for applications requiring EPCOS-TDK sourcing or automotive-qualified components.

B32529C3152J000 (EPCOS-TDK, 250V Rating) This EPCOS-TDK part provides elevated voltage rating (250V DC / 160V AC) with ±5% tolerance and polyester PET metallized stacked dielectric construction. Physical dimensions match B32529C1152J000 (0.287" L). AEC-Q200 automotive rating is included. Product status is Active with full RoHS3 compliance. Selection is appropriate for applications requiring higher voltage margin, EPCOS-TDK sourcing, or automotive qualification.

All substitute parts maintain RoHS3 compliance, REACH unaffected status, and full operating temperature range compatibility (-55°C ~ 125°C).

Frequently Asked Questions (FAQ)

Q: Can 168152J100A-F replace 168152K100A-F in any application? A: Yes. The 168152J100A-F is electrically and mechanically compatible. It provides identical voltage rating (100V DC), capacitance (1500 pF), and physical dimensions. The primary difference is improved tolerance (±5% versus ±10%), which represents an upgrade for circuit accuracy. Both parts are CDE series with identical lead spacing (5.00mm) and radial through-hole mounting.

Q: What is the difference between the CDE and EPCOS-TDK substitute options? A: Both manufacturers provide 1500 pF radial film capacitors with compatible electrical specifications. CDE parts (168152K100A-F and 168152J100A-F) maintain identical physical dimensions (7.20mm L). EPCOS-TDK parts (B32529C1152J000 and B32529C3152J000) are marginally larger (7.30mm L) but maintain identical lead spacing (5.00mm) and height (6.50mm). EPCOS-TDK parts include AEC-Q200 automotive qualification. Selection depends on manufacturer preference, sourcing availability, and application requirements.

Q: Can B32529C3152J000 (250V) be used where 168152K100A-F (100V) is specified? A: Yes. The B32529C3152J000 is electrically compatible as a direct substitute. Higher voltage rating (250V DC versus 100V DC) provides additional design margin and does not degrade circuit performance. Physical dimensions are compatible with identical lead spacing (5.00mm) and height (6.50mm). Capacitance (1500 pF) and tolerance (±5%) are equivalent or superior. Selection is appropriate when higher voltage margin is beneficial or when EPCOS-TDK sourcing is required.

Q: Are there any PCB layout considerations when substituting these parts? A: All substitute parts maintain identical lead spacing (0.197" / 5.00mm), ensuring direct PCB footprint compatibility. Physical length varies slightly: CDE parts measure 0.283" (7.20mm) while EPCOS-TDK parts measure 0.287" (7.30mm). This 0.004" (0.10mm) difference is negligible for standard through-hole PCB layouts. Height (6.50mm maximum) is identical across all parts. No layout modifications are required.

Q: Do all substitute parts meet RoHS3 compliance? A: Yes. All parts listed (168152K100A-F, 168152J100A-F, B32529C1152J000, and B32529C3152J000) are ROHS3 compliant and REACH unaffected. Regulatory compliance is maintained across all substitution options.

Q: What is the tolerance difference between ±10% and ±5%? A: Tolerance specifies the allowable deviation from the nominal 1500 pF capacitance value. ±10% tolerance allows deviation from 1350 pF to 1650 pF. ±5% tolerance allows deviation from 1425 pF to 1575 pF. Tighter tolerance (±5%) provides improved circuit accuracy and is suitable for applications requiring precise capacitance values. Parts with ±5% tolerance are direct upgrades for applications originally specified with ±10% tolerance.