TE Connectivity 1676415-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1676415-5 is a thin film chip resistor with a resistance value of 6.34 kOhms and a tolerance of ±0.1%. This 0805 (2012 Metric) surface mount device is rated for 0.1W (1/10W) power dissipation and operates across a temperature range of -55°C to 155°C. The component belongs to the RN73 series manufactured by TE Connectivity Passive Product at the Holsworthy facility. The part maintains Active product status and is suitable for precision analog and measurement applications requiring tight tolerance specifications. Substitute parts are identified to provide alternative sourcing options while maintaining identical electrical and mechanical specifications.

Substiute Parts

1676415-5

TE Connectivity Passive ProductIn Stock: 10831676415-5 Datasheet

Current PartRFQ

RN73C2A6K34BTDF

TE Connectivity Passive ProductIn Stock: 2583RN73C2A6K34BTDF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1676415-5 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution criteria include:

Electrical Parameters:

• Resistance value: 6.34 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Power rating: 0.1W / 1/10W (exact match required)
• Temperature coefficient: ±10ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)

Mechanical Parameters:

• Package type: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Physical dimensions: 0.079" L x 0.049" W / 2.00mm x 1.25mm (exact match required)
• Height - Seated (Max): 0.026" / 0.65mm (exact match required)
• Number of terminations: 2 (exact match required)

Environmental & Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)
• Series: RN73, Holsworthy (exact match required)

Substitute parts must satisfy all parameters listed above to ensure direct interchangeability in circuit applications without design modification or performance degradation.

Parameter Comparison

Engineering Selection Recommendations

Both the main part 1676415-5 and the substitute part RN73C2A6K34BTDF are manufactured by TE Connectivity Passive Product and maintain Active product status. The parts are electrically and mechanically identical across all specified parameters.

The substitute part RN73C2A6K34BTDF offers the following advantages:

Compliance Status: The substitute part carries ROHS3 compliance certification and REACH Unaffected status, providing explicit environmental regulatory compliance documentation. The main part lists RoHS status as "Not applicable" and REACH status as "Vendor Undefined," indicating less defined compliance documentation.

Packaging Format: The substitute part is supplied in Tape & Reel (TR) format, which is standard for automated assembly processes and high-volume production environments. This packaging format facilitates efficient component handling and placement on pick-and-place equipment.

Inventory Availability: The substitute part RN73C2A6K34BTDF maintains higher inventory levels (2522 Pcs) compared to the main part (977 Pcs), supporting consistent supply chain availability.

Both parts are suitable for direct substitution in applications requiring 6.34 kOhms ±0.1% thin film resistors in 0805 package format. Selection between the two should be based on specific project requirements regarding compliance documentation, packaging format, and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can RN73C2A6K34BTDF be used as a direct replacement for 1676415-5?

A: Yes. Both parts are electrically and mechanically identical. They share the same resistance value (6.34 kOhms), tolerance (±0.1%), power rating (0.1W), temperature coefficient (±10ppm/°C), operating temperature range (-55°C to 155°C), package type (0805 / 2012 Metric), physical dimensions, and composition (thin film). Direct substitution is possible without circuit modification.

Q: What is the difference between the two part numbers?

A: The primary differences are packaging format and compliance documentation. RN73C2A6K34BTDF is supplied in Tape & Reel format with explicit ROHS3 compliance and REACH Unaffected status. The main part 1676415-5 has undefined compliance documentation. Electrically and mechanically, the parts are identical.

Q: Are both parts suitable for high-precision measurement applications?

A: Yes. Both parts feature ±0.1% tolerance and ±10ppm/°C temperature coefficient, meeting precision requirements for analog measurement and signal conditioning circuits. The thin film construction provides the stability necessary for precision applications.

Q: What is the operating temperature range for these resistors?

A: Both parts operate across -55°C to 155°C. This range covers industrial, commercial, and extended temperature applications. The ±10ppm/°C temperature coefficient ensures predictable resistance variation across this temperature span.

Q: Can these 0805 resistors be used in space-constrained PCB layouts?

A: Yes. The 0805 (2012 Metric) package measures 0.079" L x 0.049" W (2.00mm x 1.25mm) with a maximum seated height of 0.026" (0.65mm). This compact form factor is suitable for dense PCB layouts while maintaining standard surface mount assembly compatibility.

Q: What is the moisture sensitivity level for these components?

A: Both parts carry Moisture Sensitivity Level (MSL) 1, which indicates unlimited moisture tolerance. These components do not require special moisture control during storage, handling, or assembly.

Q: Are these parts RoHS compliant?

A: RN73C2A6K34BTDF carries explicit ROHS3 compliance certification. The main part 1676415-5 lists RoHS status as "Not applicable." For applications requiring documented RoHS compliance, RN73C2A6K34BTDF is the appropriate selection.