TE Connectivity 1676382-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1676382-5 is a thin film chip resistor rated at 590 Ohms with ±0.1% tolerance and 0.1W power rating in 0805 (2012 Metric) surface mount package. This component is classified as Active product status and is suitable for precision analog and measurement applications requiring tight tolerance specifications. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for this resistor specification.

Substiute Parts

1676382-5

TE Connectivity Passive ProductIn Stock: 10501676382-5 Datasheet

Current PartRFQ

RN73C2A590RBTD

TE Connectivity Passive ProductIn Stock: 40734RN73C2A590RBTD Datasheet

DirectRFQ

RN73C2A590RBTDF

TE Connectivity Passive ProductIn Stock: 3330RN73C2A590RBTDF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1676382-5 are qualified based on electrical and mechanical parameter equivalence within the RN73 series. The substitution criteria are strictly defined by the following parameters:

Electrical Parameters:

• Resistance value: 590 Ohms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Power rating: 0.1W / 1/10W (exact match required)
• Temperature coefficient: ±10ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• Composition: Thin Film (exact match required)

Mechanical Parameters:

• Package / Case: 0805 (2012 Metric) (exact match required)
• Physical dimensions: 0.079" L x 0.049" W / 2.00mm x 1.25mm (exact match required)
• Height - Seated (Max): 0.026" / 0.65mm (exact match required)
• Number of terminations: 2 (exact match required)

Environmental & Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)
• Series: RN73, Holsworthy (exact match required)

The identified substitute parts RN73C2A590RBTD and RN73C2A590RBTDF meet all electrical and mechanical equivalence criteria and are direct functional replacements for the main part number 1676382-5.

Parameter Comparison

Engineering Selection Recommendations

All three part numbers—1676382-5, RN73C2A590RBTD, and RN73C2A590RBTDF—are electrically and mechanically equivalent and are classified as Active product status. The primary differentiation between these parts is packaging format and regulatory compliance documentation.

1676382-5 is supplied in bulk packaging format. RoHS and REACH compliance status are listed as not applicable or vendor undefined, indicating limited regulatory documentation.

RN73C2A590RBTD and RN73C2A590RBTDF are supplied in Tape & Reel (TR) packaging format, which is standard for automated assembly processes. Both parts carry ROHS3 Compliant certification and REACH Unaffected status, providing explicit regulatory compliance documentation suitable for applications requiring formal compliance verification.

Selection between RN73C2A590RBTD and RN73C2A590RBTDF should be based on procurement availability and inventory requirements, as both parts are functionally identical with equivalent electrical and mechanical specifications.

Frequently Asked Questions (FAQ)

Q: Are RN73C2A590RBTD and RN73C2A590RBTDF interchangeable with 1676382-5?

A: Yes. All three part numbers are electrically and mechanically equivalent. They share identical resistance value (590 Ohms), tolerance (±0.1%), power rating (0.1W), package type (0805), composition (thin film), temperature coefficient (±10ppm/°C), operating temperature range (-55°C to 155°C), physical dimensions, and termination configuration. The primary differences are packaging format (bulk versus Tape & Reel) and regulatory compliance documentation.

Q: What is the difference between RN73C2A590RBTD and RN73C2A590RBTDF?

A: Both parts are electrically and mechanically identical. The difference lies in packaging format and potentially in manufacturing lot traceability. Both are supplied in Tape & Reel (TR) format and carry ROHS3 Compliant and REACH Unaffected certifications. Selection between these two parts should be based on inventory availability and procurement lead times.

Q: Can I use these parts in automated assembly processes?

A: RN73C2A590RBTD and RN73C2A590RBTDF are supplied in Tape & Reel (TR) packaging, which is standard for automated surface mount assembly. The 1676382-5 is supplied in bulk packaging and requires manual handling or custom reel preparation for automated processes.

Q: What is the Moisture Sensitivity Level for these resistors?

A: All three parts have Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions. These components do not require special moisture control during storage or handling.

Q: Are these parts RoHS compliant?

A: RN73C2A590RBTD and RN73C2A590RBTDF are ROHS3 Compliant. The 1676382-5 has RoHS status listed as not applicable. For applications requiring explicit RoHS compliance documentation, RN73C2A590RBTD or RN73C2A590RBTDF are the appropriate selections.

Q: What is the temperature coefficient specification?

A: All three parts have a temperature coefficient of ±10ppm/°C, indicating stable resistance performance across the operating temperature range of -55°C to 155°C. This specification is suitable for precision analog applications.

Q: Can these resistors be used in high-temperature applications?

A: Yes. All three parts are rated for operating temperatures up to 155°C, making them suitable for elevated temperature environments within this specification limit.