TE Connectivity 1676275-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1676275-5 is a thin film chip resistor rated at 280 Ohms with ±0.1% tolerance and 0.1W power rating in 0805 (2012 Metric) surface mount package. This component is classified as Active product status and is suitable for precision analog and measurement applications requiring tight tolerance specifications. Substitute parts are identified to provide alternative sourcing options while maintaining identical electrical and mechanical specifications.

Substiute Parts

1676275-5

TE Connectivity Passive ProductIn Stock: 9221676275-5 Datasheet

Current PartRFQ

RN73C2A280RBTDF

TE Connectivity Passive ProductIn Stock: 1791RN73C2A280RBTDF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1676275-5 are qualified based on matching the following critical parameters:

• Resistance value: 280 Ohms
• Tolerance specification: ±0.1%
• Power rating: 0.1W (1/10W)
• Package type: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C to 155°C
• Physical dimensions and termination count

The substitute part RN73C2A280RBTDF meets all electrical and mechanical requirements for direct substitution. The primary difference between the main part and substitute is the packaging format (Tape & Reel versus standard packaging) and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1676275-5 and RN73C2A280RBTDF are Active status products from the same manufacturer and series. The substitute part RN73C2A280RBTDF provides ROHS3 compliance and REACH Unaffected certification, offering enhanced regulatory alignment for applications subject to environmental compliance requirements.

Selection between these parts should be based on:

1. Packaging Requirements: The main part uses standard packaging, while the substitute is supplied in Tape & Reel format. Tape & Reel packaging is standard for high-volume automated assembly processes.

2. Regulatory Compliance: The substitute part carries explicit ROHS3 compliance and REACH Unaffected status, whereas the main part lists RoHS status as not applicable. Applications requiring documented compliance with these regulations should specify the substitute part.

3. Electrical Equivalence: Both parts are electrically identical with matching resistance, tolerance, power rating, temperature coefficient, and operating temperature range.

4. Physical Compatibility: Both parts are mechanically identical in 0805 package format with identical dimensions and termination specifications, ensuring PCB layout compatibility.

Frequently Asked Questions (FAQ)

Q: Can RN73C2A280RBTDF be used as a direct replacement for 1676275-5?

A: Yes. Both parts are electrically and mechanically identical with matching 280 Ohm resistance, ±0.1% tolerance, 0.1W power rating, and 0805 package specifications. The primary difference is packaging format (Tape & Reel versus standard) and regulatory certifications.

Q: What is the difference between the packaging formats?

A: The main part 1676275-5 uses standard packaging, while RN73C2A280RBTDF is supplied in Tape & Reel (TR) format. Tape & Reel packaging is designed for automated pick-and-place assembly equipment and is standard for production volumes. Both formats contain identical components.

Q: Are there compliance differences between these parts?

A: The substitute part RN73C2A280RBTDF carries explicit ROHS3 compliance and REACH Unaffected certification. The main part lists RoHS status as not applicable. For applications requiring documented environmental compliance, the substitute part is the appropriate selection.

Q: Do these parts have identical electrical performance?

A: Yes. Both parts share identical electrical specifications: 280 Ohms resistance, ±0.1% tolerance, 0.1W power rating, ±10ppm/°C temperature coefficient, and -55°C to 155°C operating temperature range.

Q: Are the physical dimensions identical?

A: Yes. Both parts are 0805 (2012 Metric) package with identical dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum seated height of 0.026" (0.65mm). PCB footprints are identical.

Q: What is the Moisture Sensitivity Level for both parts?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.