Equivalent & Substitute Parts for 1676252-5

Part Overview

The TE Connectivity 1676252-5 is a 215 Ohm ±0.1% thin film chip resistor rated at 0.1W (1/10W) in 0805 (2012 Metric) surface mount package. This component is classified as obsolete product status. Identification of equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for production and repair applications. Active alternatives with identical or enhanced electrical specifications are available from multiple manufacturers.

Key Parameters

Parameter	Value
Resistance	215 Ohms
Tolerance	±0.1%
Power Rating	0.1W (1/10W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±10ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the 1676252-5 is determined by strict adherence to the following electrical and mechanical parameters:

Critical Parameters for Direct Substitution:

Resistance value: 215 Ohms
Tolerance: ±0.1% or tighter
Package: 0805 (2012 Metric)
Composition: Thin Film
Operating temperature range: -55°C to 155°C minimum
Moisture sensitivity level: 1 (Unlimited)

Acceptable Variations:

Power rating: Equal to or greater than 0.1W (1/10W)
Temperature coefficient: Equal to or lower absolute value
Product status: Active preferred over obsolete
Compliance: RoHS3 compliance and REACH unaffected status

Substitute parts are grouped into two categories:

Direct Equivalents: Parts meeting all critical parameters with identical or superior specifications. These include TE Connectivity RN73 series components (RN73C2A215RBTD, RN73C2A215RBTDF) and Stackpole Electronics RNCF series components (RNCF0805BKT215R, RNCF0805BTT215R).

Upgraded Alternatives: Parts exceeding the original specifications through enhanced power rating (0.125W vs. 0.1W), improved temperature coefficient (±5ppm/°C vs. ±10ppm/°C), tighter tolerance (±0.02% to ±0.05% vs. ±0.1%), or additional features such as anti-sulfur protection and automotive AEC-Q200 qualification. These include Susumu RG series components (RG2012N-2150-B-T5, RG2012N-2150-W-T1, RG2012V-2150-B-T5, RG2012V-2150-P-T1, RG2012V-2150-W-T1, RG2012V-2150-W-T5).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Product Status	Features	RoHS Status
1676252-5	TE Connectivity	215 Ω	±0.1%	0.1	±10	Obsolete	—	Not specified
RN73C2A215RBTD	TE Connectivity	215 Ω	±0.1%	0.1	±10	Active	—	RoHS3 Compliant
RN73C2A215RBTDF	TE Connectivity	215 Ω	±0.1%	0.1	±10	Active	—	RoHS3 Compliant
RNCF0805BKT215R	Stackpole Electronics	215 Ω	±0.1%	0.125	±10	Active	Automotive AEC-Q200	RoHS3 Compliant
RNCF0805BTT215R	Stackpole Electronics	215 Ω	±0.1%	0.125	±10	Active	Automotive AEC-Q200	RoHS3 Compliant
RG2012N-2150-B-T5	Susumu	215 Ω	±0.1%	0.125	±10	Active	Anti-Sulfur, Automotive AEC-Q200	RoHS3 Compliant
RG2012N-2150-W-T1	Susumu	215 Ω	±0.05%	0.125	±10	Active	Anti-Sulfur, Automotive AEC-Q200	RoHS3 Compliant
RG2012V-2150-B-T5	Susumu	215 Ω	±0.1%	0.125	±5	Active	Anti-Sulfur, Automotive AEC-Q200	RoHS3 Compliant
RG2012V-2150-P-T1	Susumu	215 Ω	±0.02%	0.125	±5	Active	Anti-Sulfur, Automotive AEC-Q200	RoHS3 Compliant
RG2012V-2150-W-T1	Susumu	215 Ω	±0.05%	0.125	±5	Active	Anti-Sulfur, Automotive AEC-Q200	RoHS3 Compliant
RG2012V-2150-W-T5	Susumu	215 Ω	±0.05%	0.125	±5	Active	Anti-Sulfur, Automotive AEC-Q200	RoHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications):

The TE Connectivity RN73C2A215RBTD and RN73C2A215RBTDF are direct functional equivalents to the obsolete 1676252-5. Both components maintain identical electrical specifications (215 Ohms ±0.1%, 0.1W, ±10ppm/°C) and mechanical compatibility (0805 package). Both are active products with RoHS3 compliance. The RN73C2A215RBTDF variant is available in higher inventory quantity (1060 pcs vs. 1146 pcs) and represents the preferred selection for direct substitution.

For Applications Requiring Enhanced Reliability:

The Stackpole Electronics RNCF0805BKT215R and RNCF0805BTT215R provide identical electrical specifications with increased power rating (0.125W vs. 0.1W) and automotive AEC-Q200 qualification. These components are suitable for applications requiring automotive-grade reliability without modification to circuit design.

For Applications Requiring Superior Performance:

The Susumu RG series components offer multiple performance enhancements:

RG2012N-2150-B-T5: Maintains ±0.1% tolerance with anti-sulfur protection and AEC-Q200 qualification
RG2012N-2150-W-T1: Improves tolerance to ±0.05% with anti-sulfur protection and AEC-Q200 qualification
RG2012V-2150-B-T5: Improves temperature coefficient to ±5ppm/°C with anti-sulfur protection and AEC-Q200 qualification
RG2012V-2150-P-T1: Achieves ±0.02% tolerance with ±5ppm/°C temperature coefficient, anti-sulfur protection, and AEC-Q200 qualification
RG2012V-2150-W-T1 and RG2012V-2150-W-T5: Provide ±0.05% tolerance with ±5ppm/°C temperature coefficient, anti-sulfur protection, and AEC-Q200 qualification

All substitute parts maintain REACH unaffected status and EAR99 export classification consistent with the original component.

Frequently Asked Questions (FAQ)

Q: Can RN73C2A215RBTD be used as a direct replacement for 1676252-5?

A: Yes. The RN73C2A215RBTD is a direct functional equivalent. Both components share identical resistance (215 Ohms), tolerance (±0.1%), power rating (0.1W), temperature coefficient (±10ppm/°C), and 0805 package configuration. The primary difference is product status: RN73C2A215RBTD is active while 1676252-5 is obsolete. No circuit modifications are required.

Q: What is the difference between RN73C2A215RBTD and RN73C2A215RBTDF?

A: Both components are electrically and mechanically identical. The difference is in packaging designation and inventory availability. RN73C2A215RBTDF has higher inventory (1060 pcs vs. 1146 pcs). Both are active products with RoHS3 compliance and identical specifications.

Q: Why would I select a Susumu RG series component over a TE Connectivity RN73 component?

A: Susumu RG series components provide enhanced specifications including higher power rating (0.125W vs. 0.1W), improved temperature coefficient (±5ppm/°C vs. ±10ppm/°C on RG2012V variants), tighter tolerance options (down to ±0.02%), anti-sulfur protection, and automotive AEC-Q200 qualification. These upgrades are beneficial for applications requiring superior long-term stability, automotive environments, or enhanced reliability margins.

Q: Are all substitute parts compatible with the 0805 package footprint?

A: Yes. All substitute parts listed are specified for 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Physical board layout compatibility is maintained across all substitutes. Height variations exist (0.026" maximum for TE Connectivity vs. 0.020" maximum for Susumu), but these remain within standard 0805 package tolerances and do not affect PCB assembly compatibility.

Q: What is the significance of the anti-sulfur feature on Susumu RG components?

A: Anti-sulfur protection is a material enhancement that prevents sulfur-induced corrosion of component terminations in environments with elevated hydrogen sulfide exposure. This feature is particularly relevant for automotive and industrial applications. The original 1676252-5 does not specify anti-sulfur protection; therefore, this feature represents an optional upgrade for applications in corrosive environments.

Q: Can I use a 0.125W rated component in place of a 0.1W rated component?

A: Yes. A higher power rating component (0.125W) is a valid substitution for a lower power rating component (0.1W) provided all other electrical specifications are maintained. The higher power rating provides additional thermal margin and does not affect circuit operation. The component will operate within its rated specifications under identical load conditions.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All active substitute parts listed (RN73C2A215RBTD, RN73C2A215RBTDF, RNCF0805BKT215R, RNCF0805BTT215R, and all Susumu RG series components) are specified as RoHS3 compliant. The original 1676252-5 does not specify RoHS status. All substitutes maintain REACH unaffected status and EAR99 export classification.

Q: What is the difference between RG2012N and RG2012V series?

A: The RG2012V series provides improved temperature coefficient (±5ppm/°C) compared to RG2012N series (±10ppm/°C). Both series include anti-sulfur protection and AEC-Q200 qualification. Selection between series depends on application requirements for temperature stability. RG2012V is preferred for precision applications requiring superior temperature coefficient performance.

Q: Is the 1676252-5 still available for purchase?

A: The 1676252-5 is classified as obsolete product status. While 840 pcs are reported in stock, long-term availability is not assured. Active alternatives such as RN73C2A215RBTD (1146 pcs in stock) or RN73C2A215RBTDF (1060 pcs in stock) are recommended for new designs and ongoing production to ensure supply chain continuity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message