TE Connectivity 1676204-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1676204-5 is a 16.5 kOhms ±0.1% thin film chip resistor rated at 0.1W (1/10W) in 0805 (2012 Metric) surface mount package. This component is part of the RN73 series manufactured by TE Connectivity Passive Product and maintains Active product status. Substitute parts are identified based on matching electrical specifications, mechanical dimensions, and packaging compatibility to ensure direct functional equivalence in circuit applications.

Substiute Parts

1676204-5

TE Connectivity Passive ProductIn Stock: 7471676204-5 Datasheet

Current PartRFQ

RN73C2A16K5BTDF

TE Connectivity Passive ProductIn Stock: 3784RN73C2A16K5BTDF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1676204-5 are identified through strict equivalence of the following critical parameters:

• Resistance Value: 16.5 kOhms
• Tolerance: ±0.1%
• Power Rating: 0.1W (1/10W)
• Composition: Thin Film
• Package / Case: 0805 (2012 Metric)
• Temperature Coefficient: ±10ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Physical Dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height - Seated (Max): 0.026" (0.65mm)

The substitute part RN73C2A16K5BTDF matches all electrical and mechanical parameters specified for the main part. The primary distinction is packaging format: the main part uses standard packaging while the substitute is supplied in Tape & Reel (TR) format. Both parts are manufactured by TE Connectivity Passive Product within the RN73 series and maintain identical functional characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1676204-5 and RN73C2A16K5BTDF are functionally equivalent thin film chip resistors with identical electrical and mechanical specifications. Selection between these parts is determined by packaging and supply requirements:

1676204-5 is appropriate for applications requiring standard packaging format with immediate component-level availability.

RN73C2A16K5BTDF is appropriate for high-volume production environments utilizing automated assembly processes, as it is supplied in Tape & Reel (TR) format. This part carries ROHS3 compliance certification and REACH Unaffected status, providing enhanced regulatory documentation for applications with strict environmental compliance requirements.

Both parts operate across the -55°C ~ 155°C temperature range with ±10ppm/°C temperature coefficient and maintain MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility in standard industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can RN73C2A16K5BTDF be used as a direct replacement for 1676204-5?

A: Yes. Both parts are electrically and mechanically identical 16.5 kOhms ±0.1% thin film chip resistors in 0805 (2012 Metric) package. The primary difference is packaging format: RN73C2A16K5BTDF is supplied in Tape & Reel (TR) format suitable for automated assembly, while 1676204-5 uses standard packaging.

Q: What are the critical parameters for substitution compatibility?

A: Substitution compatibility is determined by: resistance value (16.5 kOhms), tolerance (±0.1%), power rating (0.1W), composition (thin film), package type (0805), temperature coefficient (±10ppm/°C), operating temperature range (-55°C ~ 155°C), and physical dimensions (0.079" L x 0.049" W, 0.026" max height).

Q: Are there differences in compliance certifications between these parts?

A: RN73C2A16K5BTDF carries ROHS3 compliance and REACH Unaffected status. The 1676204-5 lists RoHS status as Not applicable and REACH status as Vendor Undefined. Both parts share identical ECCN (EAR99) and HTSUS (8533.21.0030) classifications.

Q: What is the significance of Tape & Reel (TR) packaging?

A: Tape & Reel packaging is standard for high-volume automated surface mount assembly. Components are supplied on continuous tape wound on reels, enabling direct feeding into pick-and-place equipment. This format reduces manual handling and improves assembly efficiency compared to standard packaging.

Q: Are the physical dimensions identical between both parts?

A: Yes. Both parts measure 0.079" L x 0.049" W (2.00mm x 1.25mm) with maximum seated height of 0.026" (0.65mm). They are fully compatible with identical PCB footprints and assembly processes.

Q: What is the Moisture Sensitivity Level (MSL) rating?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. These components do not require special moisture control during storage, handling, or assembly.