TE Connectivity 1676156-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1676156-5 is a thin film chip resistor with a resistance value of 113 kOhms and a tolerance of ±0.1%. This 0805 (2012 Metric) surface mount device is rated for 0.1W (1/10W) power dissipation and operates across a temperature range of -55°C to 155°C. The part is manufactured as part of the RN73 Holsworthy series and maintains an active product status. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when specific packaging requirements necessitate component alternatives.

Substiute Parts

1676156-5

TE Connectivity Passive ProductIn Stock: 8821676156-5 Datasheet

Current PartRFQ

RN73C2A113KBTDF

TE Connectivity Passive ProductIn Stock: 1018RN73C2A113KBTDF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1676156-5 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part RN73C2A113KBTDF maintains identical specifications for resistance value, tolerance, power rating, composition, package type, temperature coefficient, and operating temperature range. Both parts are manufactured by TE Connectivity within the RN73 Holsworthy series and share the same 0805 (2012 Metric) footprint and physical dimensions.

The primary distinction between these parts is packaging format. The main part number 1676156-5 is supplied in standard packaging, while the substitute part RN73C2A113KBTDF is supplied in Tape & Reel (TR) format. This packaging difference does not affect electrical or mechanical compatibility; it reflects only the distribution and handling method.

Substitution is valid when the following parameters are matched:

• Resistance value: 113 kOhms
• Tolerance: ±0.1%
• Power rating: 0.1W (1/10W)
• Composition: Thin Film
• Package / Case: 0805 (2012 Metric)
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C to 155°C

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1676156-5 and RN73C2A113KBTDF are active products manufactured by TE Connectivity and are electrically and mechanically equivalent. Selection between these parts should be based on packaging requirements and compliance certifications applicable to the end application.

The substitute part RN73C2A113KBTDF carries ROHS3 compliance and REACH Unaffected status, providing explicit regulatory documentation. The main part number 1676156-5 lists RoHS status as "Not applicable" and REACH status as "Vendor Undefined," indicating that compliance documentation may require clarification from the supplier.

For applications requiring documented RoHS3 compliance or REACH compliance verification, the substitute part RN73C2A113KBTDF is the appropriate selection. For applications where packaging format is a determining factor, the main part number 1676156-5 in standard packaging or the substitute part RN73C2A113KBTDF in Tape & Reel format should be selected based on assembly process requirements.

Frequently Asked Questions (FAQ)

Q: Are the 1676156-5 and RN73C2A113KBTDF electrically identical?

A: Yes. Both parts have identical resistance values (113 kOhms), tolerance (±0.1%), power rating (0.1W), temperature coefficient (±10ppm/°C), and operating temperature range (-55°C to 155°C). They are manufactured from the same thin film composition and are fully interchangeable from an electrical standpoint.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. The 1676156-5 is supplied in standard packaging, while the RN73C2A113KBTDF is supplied in Tape & Reel (TR) format. Additionally, the substitute part carries explicit ROHS3 compliance and REACH Unaffected certifications, whereas the main part number has undefined compliance status.

Q: Can I use RN73C2A113KBTDF as a direct replacement for 1676156-5 on a PCB?

A: Yes. Both parts share identical 0805 (2012 Metric) package specifications, physical dimensions (0.079" L x 0.049" W), and footprint requirements. They are mechanically and electrically interchangeable at the PCB level.

Q: Which part should I select for high-volume production?

A: The RN73C2A113KBTDF in Tape & Reel (TR) format is the standard choice for high-volume automated assembly processes. Tape & Reel packaging is optimized for pick-and-place equipment and reduces handling costs in production environments.

Q: Are there any temperature or environmental limitations I should consider?

A: Both parts operate identically across the -55°C to 155°C temperature range with a temperature coefficient of ±10ppm/°C. Both have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity constraints during storage or handling.

Q: What compliance certifications apply to each part?

A: The RN73C2A113KBTDF carries ROHS3 compliance and REACH Unaffected status. The 1676156-5 lists RoHS status as "Not applicable" and REACH status as "Vendor Undefined." For applications requiring documented compliance, the RN73C2A113KBTDF is the appropriate selection.