TE Connectivity 1676155-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1676155-5 is a thin film chip resistor rated at 110 Ohms with ±0.1% tolerance and 0.1W power rating in 0805 (2012 Metric) surface mount package. This component is classified as Active product status and is suitable for precision analog and measurement applications requiring tight tolerance specifications. Substitute parts are identified to provide alternative sourcing options while maintaining identical electrical and mechanical specifications.

Substiute Parts

1676155-5

TE Connectivity Passive ProductIn Stock: 8971676155-5 Datasheet

Current PartRFQ

RN73C2A110RBTDF

TE Connectivity Passive ProductIn Stock: 3445RN73C2A110RBTDF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1676155-5 is based on matching the following critical parameters:

• Resistance value: 110 Ohms
• Tolerance specification: ±0.1%
• Power rating: 0.1W (1/10W)
• Package type: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)

The substitute part RN73C2A110RBTDF meets all these parameters and is therefore electrically and mechanically interchangeable. The primary difference between the main part and substitute is packaging format: the main part uses standard packaging while the substitute is supplied in Tape & Reel (TR) format for automated assembly processes.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1676155-5 and RN73C2A110RBTDF are Active status products from the same manufacturer and series. The substitute part RN73C2A110RBTDF provides ROHS3 compliance and REACH Unaffected status, offering enhanced regulatory documentation compared to the main part.

Selection between these parts should be based on:

1. Packaging requirements: The main part uses standard packaging, while the substitute is supplied in Tape & Reel format for high-volume automated assembly.
2. Regulatory compliance: The substitute part carries explicit ROHS3 compliance and REACH Unaffected status, suitable for applications requiring documented environmental compliance.
3. Inventory availability: Both parts are in stock; selection may depend on quantity requirements and supply chain logistics.

All electrical and mechanical parameters are identical, ensuring direct functional interchangeability in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can RN73C2A110RBTDF be used as a direct replacement for 1676155-5?

A: Yes. Both parts are electrically and mechanically identical with matching resistance (110 Ohms), tolerance (±0.1%), power rating (0.1W), package type (0805), composition (Thin Film), temperature coefficient (±10ppm/°C), and operating temperature range (-55°C ~ 155°C). The primary difference is packaging format.

Q: What is the difference between the standard packaging and Tape & Reel format?

A: The main part 1676155-5 uses standard packaging, while RN73C2A110RBTDF is supplied in Tape & Reel (TR) format. Tape & Reel packaging is designed for automated pick-and-place assembly equipment and is typically used in high-volume production environments.

Q: Are there any compliance differences between these parts?

A: The substitute part RN73C2A110RBTDF carries explicit ROHS3 compliance and REACH Unaffected status. The main part lists RoHS status as Not applicable and REACH status as Vendor Undefined. For applications requiring documented environmental compliance, the substitute part is preferable.

Q: Do these parts have the same moisture sensitivity?

A: Yes. Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are both parts currently available?

A: Yes. The main part 1676155-5 has 831 pieces in stock, and the substitute RN73C2A110RBTDF has 3415 pieces in stock.

Q: Can I use these parts interchangeably in my circuit design?

A: Yes. All electrical specifications, mechanical dimensions, and operating parameters are identical. Circuit performance will be equivalent regardless of which part is selected.