TE Connectivity 1676148-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1676148-5 is a 107 kOhms ±0.1% thin film chip resistor rated at 0.1W (1/10W) in 0805 (2012 Metric) surface mount package. This component is classified as Active product status and is suitable for precision analog circuits requiring tight tolerance specifications. Substitute parts are identified based on matching electrical characteristics, mechanical dimensions, and packaging compatibility to ensure direct functional equivalence in circuit applications.

Substiute Parts

1676148-5

TE Connectivity Passive ProductIn Stock: 11531676148-5 Datasheet

Current PartRFQ

RN73C2A107KBTDF

TE Connectivity Passive ProductIn Stock: 1616RN73C2A107KBTDF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1676148-5 is determined by the following critical parameters:

Electrical Equivalence Requirements:

• Resistance value: 107 kOhms (exact match)
• Tolerance: ±0.1% (exact match)
• Power rating: 0.1W / 1/10W (exact match)
• Temperature coefficient: ±10ppm/°C (exact match)
• Operating temperature range: -55°C ~ 155°C (exact match)

Mechanical Equivalence Requirements:

• Package type: 0805 (2012 Metric) (exact match)
• Physical dimensions: 0.079" L x 0.049" W / 2.00mm x 1.25mm (exact match)
• Maximum seated height: 0.026" (0.65mm) (exact match)
• Number of terminations: 2 (exact match)

Material & Composition:

• Thin film construction (exact match)
• Moisture sensitivity level: 1 (Unlimited) (exact match)

Substitute parts must satisfy all electrical and mechanical parameters listed above to ensure direct functional and physical compatibility within the circuit design.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: RN73C2A107KBTDF

The RN73C2A107KBTDF is a direct electrical and mechanical equivalent to the 1676148-5. Both components are manufactured by TE Connectivity within the RN73 Holsworthy series and share identical specifications across all critical parameters: 107 kOhms resistance, ±0.1% tolerance, 0.1W power rating, thin film composition, ±10ppm/°C temperature coefficient, and 0805 package dimensions.

The primary distinction between these parts is packaging format. The 1676148-5 is supplied in bulk packaging, while the RN73C2A107KBTDF is supplied in Tape & Reel (TR) format. This difference affects procurement and assembly processes but does not impact electrical or mechanical performance.

The RN73C2A107KBTDF carries ROHS3 compliance certification, whereas the 1676148-5 lists RoHS status as not applicable. Both components share identical ECCN (EAR99) and HTSUS (8533.21.0030) classifications.

Selection between these parts should be based on packaging requirements and supply chain considerations. Both are Active status products with equivalent technical performance in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can RN73C2A107KBTDF be used as a direct replacement for 1676148-5 in PCB assembly?

A: Yes. The RN73C2A107KBTDF is electrically and mechanically equivalent to the 1676148-5. Both components have identical resistance (107 kOhms), tolerance (±0.1%), power rating (0.1W), package type (0805), and physical dimensions. Direct substitution is supported from a technical standpoint.

Q: What is the difference between the 1676148-5 and RN73C2A107KBTDF?

A: The primary difference is packaging format. The 1676148-5 is supplied in bulk packaging, while the RN73C2A107KBTDF is supplied in Tape & Reel (TR) format. All electrical and mechanical specifications are identical. The RN73C2A107KBTDF also carries ROHS3 compliance certification.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both the 1676148-5 and RN73C2A107KBTDF operate across the identical temperature range of -55°C to 155°C with a temperature coefficient of ±10ppm/°C.

Q: Does packaging format affect circuit performance?

A: No. Packaging format (bulk versus Tape & Reel) affects procurement, storage, and assembly logistics but does not impact electrical performance or circuit functionality. Both formats contain the same component.

Q: Are both parts RoHS compliant?

A: The RN73C2A107KBTDF is ROHS3 compliant. The 1676148-5 lists RoHS status as not applicable. For applications requiring RoHS compliance certification, the RN73C2A107KBTDF is the appropriate selection.

Q: Can these parts be used in high-precision analog circuits?

A: Yes. Both components feature ±0.1% tolerance and ±10ppm/°C temperature coefficient, making them suitable for precision analog applications requiring tight tolerance specifications.

Q: What is the moisture sensitivity level for both parts?

A: Both the 1676148-5 and RN73C2A107KBTDF have a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.