Equivalent & Substitute Parts for 167473J100A-F

Part Overview

The 167473J100A-F is a 0.047 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE), rated for 100V DC operation with ±5% tolerance. This polyester metallized radial capacitor is designed for general-purpose applications across industrial and commercial equipment. The part maintains Active product status with 1046 units currently in stock.

Equivalent and substitute parts are identified to address supply chain requirements, inventory availability, or specific application constraints while maintaining electrical and mechanical compatibility within the defined parameter specifications.

Substiute Parts

167473J100A-F

Cornell Dubilier Electronics (CDE)In Stock: 1150167473J100A-F Datasheet

Current PartRFQ

168473J100C-F

Cornell Dubilier Electronics (CDE)In Stock: 2691168473J100C-F Datasheet

SimilarRFQ

B32529C1473J000

EPCOS - TDK ElectronicsIn Stock: 8183B32529C1473J000 Datasheet

SimilarRFQ

B32529C1473J289

EPCOS - TDK ElectronicsIn Stock: 3534B32529C1473J289 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 167473J100A-F is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value: 0.047 µF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating - DC: 100V (minimum requirement; higher ratings acceptable)
• Voltage Rating - AC: 63V (minimum requirement; higher ratings acceptable)
• Dielectric Material: Polyester, Metallized (material family match required)
• Operating Temperature Range: -55°C to 125°C (minimum requirement; wider ranges acceptable)

Mechanical Equivalence Requirements:

• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial (exact match required)
• Termination: PC Pins (exact match required)

Compliance Requirements:

• RoHS3 Compliant (mandatory for all substitutes)

All identified substitute parts meet these criteria. Variations in physical dimensions and lead spacing are permissible provided the component fits within the PCB layout constraints of the target application.

Parameter Comparison

Engineering Selection Recommendations

168473J100C-F (CDE): This substitute maintains identical electrical specifications and CDE manufacturer continuity. The primary distinction is reduced physical dimensions (7.20mm × 2.50mm versus 10.50mm × 3.50mm) and modified lead spacing (5.00mm versus 7.50mm). Selection of this part requires verification that PCB layout accommodates the reduced lead spacing. Both parts carry Active product status and ROHS3 compliance.

B32529C1473J000 (EPCOS - TDK Electronics): This substitute provides electrical equivalence with expanded inventory availability (8123 units). The dielectric material is specified as polyester (PET) with metallized stacked construction, functionally equivalent to the main part's polyester metallized design. This part carries AEC-Q200 automotive qualification and is suitable for automotive and EMI/RFI suppression applications. Packaging is Bulk format. ROHS3 compliance and REACH Unaffected status are maintained.

B32529C1473J289 (EPCOS - TDK Electronics): This substitute is electrically and mechanically equivalent to B32529C1473J000, with identical specifications and physical dimensions. The primary distinction is Cut Tape (CT) packaging format versus Bulk. This part also carries AEC-Q200 automotive qualification. Selection depends on assembly process requirements and tape-and-reel handling capabilities.

All substitute parts maintain compliance with ROHS3 and REACH requirements. Product status is Active for all identified equivalents.

Frequently Asked Questions (FAQ)

Q: Can 168473J100C-F be used as a direct replacement for 167473J100A-F?

A: Electrical substitution is valid. The 168473J100C-F maintains identical capacitance (0.047 µF), tolerance (±5%), voltage ratings (100V DC / 63V AC), dielectric material (polyester metallized), and operating temperature range (-55°C to 125°C). However, physical dimensions and lead spacing differ. The 168473J100C-F measures 7.20mm × 2.50mm with 5.00mm lead spacing, compared to 10.50mm × 3.50mm with 7.50mm lead spacing for the 167473J100A-F. PCB layout compatibility must be verified before substitution.

Q: What is the difference between CDE and EPCOS substitute parts?

A: Both manufacturers provide electrically equivalent 0.047 µF film capacitors rated for 100V DC with ±5% tolerance. CDE parts (167473J100A-F and 168473J100C-F) are standard general-purpose polyester metallized capacitors. EPCOS parts (B32529C1473J000 and B32529C1473J289) feature polyester (PET) metallized stacked construction and carry AEC-Q200 automotive qualification, making them suitable for automotive and EMI/RFI suppression applications. Both meet ROHS3 compliance.

Q: Are B32529C1473J000 and B32529C1473J289 interchangeable?

A: Yes, these parts are electrically and mechanically identical. The sole distinction is packaging format: B32529C1473J000 is supplied in Bulk packaging, while B32529C1473J289 is supplied in Cut Tape (CT) format. Selection depends on assembly process requirements and handling equipment compatibility.

Q: What does "Metallized - Stacked" construction mean for EPCOS parts?

A: Metallized - Stacked construction refers to the internal dielectric configuration where multiple polyester (PET) film layers are stacked and metallized. This construction method is functionally equivalent to the standard polyester metallized design used in CDE parts for the specified electrical parameters. Both construction methods deliver the same capacitance, voltage rating, and tolerance performance.

Q: Can these substitutes be used in automotive applications?

A: EPCOS parts B32529C1473J000 and B32529C1473J289 carry AEC-Q200 automotive qualification and are explicitly rated for automotive and EMI/RFI suppression applications. CDE parts 167473J100A-F and 168473J100C-F are general-purpose components without automotive qualification. Automotive application requirements should determine whether EPCOS-qualified parts are necessary.

Q: What is the significance of the lead spacing difference?

A: Lead spacing determines the distance between component pins on the PCB. The 167473J100A-F uses 7.50mm spacing, while substitute parts 168473J100C-F, B32529C1473J000, and B32529C1473J289 use 5.00mm spacing. PCB layout must accommodate the selected lead spacing. Substitution with different lead spacing requires PCB redesign or use of adapter solutions.

Q: Are all these parts RoHS3 compliant?

A: Yes, all identified substitute parts (167473J100A-F, 168473J100C-F, B32529C1473J000, and B32529C1473J289) are ROHS3 Compliant. REACH status is Unaffected for all parts, indicating compliance with REACH regulations.