Equivalent & Substitute Parts: 167472K400A-F

Part Overview

The 167472K400A-F is a 4700 pF film capacitor manufactured by Cornell Dubilier Electronics (CDE) in the 167 series. This radial through-hole component operates at 400V DC / 200V AC with polyester metallized dielectric construction. The part is active in production status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified to address inventory availability, packaging format requirements, or application-specific certifications while maintaining electrical and mechanical compatibility within specified tolerances.

Substiute Parts

167472K400A-F

Cornell Dubilier Electronics (CDE)In Stock: 1212167472K400A-F Datasheet

Current PartRFQ

B32529C6472K000

EPCOS - TDK ElectronicsIn Stock: 1704B32529C6472K000 Datasheet

SimilarRFQ

B32529C6472K289

EPCOS - TDK ElectronicsIn Stock: 12797B32529C6472K289 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 167472K400A-F is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Non-Negotiable):

• Capacitance value: 4700 pF
• Tolerance: ±10%
• Voltage rating: 400V DC / 200V AC minimum
• Dielectric material: Polyester, Metallized composition

Mechanical Parameters (Non-Negotiable):

• Mounting type: Through Hole
• Package configuration: Radial
• Termination style: PC Pins
• Operating temperature range: -55°C to 125°C

Acceptable Variations:

• Physical dimensions (length, width, height) may differ provided lead spacing accommodates standard 0.1" grid PCB layouts
• Packaging format (Bulk vs. Cut Tape) does not affect electrical substitution
• Manufacturer series designation does not affect substitution provided all electrical and mechanical parameters align

The substitute parts B32529C6472K000 and B32529C6472K289 meet all critical parameters and are classified as direct electrical and mechanical equivalents.

Parameter Comparison

Engineering Selection Recommendations

167472K400A-F (CDE): Primary selection for general-purpose applications. Active production status with full inventory availability (1123 pcs). ROHS3 compliant with REACH unaffected designation. Suitable for standard through-hole PCB assembly processes.

B32529C6472K000 (EPCOS - TDK): Direct electrical equivalent with automotive-grade qualification (AEC-Q200 rated). Bulk packaging format. Compact physical dimensions (7.30mm x 2.50mm) with 5.00mm lead spacing. Recommended for automotive and EMI/RFI suppression applications. High inventory availability (1618 pcs).

B32529C6472K289 (EPCOS - TDK): Direct electrical equivalent with automotive-grade qualification (AEC-Q200 rated). Cut Tape packaging format suitable for automated assembly processes. Identical electrical and mechanical specifications to B32529C6472K000. Highest inventory availability (12695 pcs). Recommended for high-volume production environments requiring tape-and-reel format.

All three parts maintain compliance with RoHS3 and REACH requirements. Selection between substitutes depends on packaging format preference and application-specific certifications rather than electrical performance.

Frequently Asked Questions (FAQ)

Q: Can B32529C6472K000 or B32529C6472K289 be used as direct replacements for 167472K400A-F?

A: Yes. Both EPCOS - TDK parts are direct electrical and mechanical equivalents. All critical parameters including capacitance (4700 pF), tolerance (±10%), voltage rating (400V DC / 200V AC), dielectric material (polyester metallized), operating temperature range (-55°C to 125°C), and mounting configuration (through-hole radial with PC pins) are identical.

Q: What is the difference between B32529C6472K000 and B32529C6472K289?

A: The parts are electrically and mechanically identical. The sole difference is packaging format: B32529C6472K000 is supplied in Bulk packaging, while B32529C6472K289 is supplied in Cut Tape (CT) format. Selection depends on assembly process requirements and inventory handling procedures.

Q: Are there physical dimension differences between the main part and substitutes?

A: Yes. The 167472K400A-F measures 10.50mm x 3.50mm with 7.50mm lead spacing. The EPCOS - TDK substitutes measure 7.30mm x 2.50mm with 5.00mm lead spacing. Both lead spacings are compatible with standard 0.1" grid PCB layouts. Verify PCB footprint design accommodates the smaller substitute dimensions if space constraints exist.

Q: Do the substitute parts carry automotive certifications?

A: Yes. Both B32529C6472K000 and B32529C6472K289 are AEC-Q200 rated, indicating automotive-grade qualification. The 167472K400A-F does not carry this certification. Select EPCOS - TDK substitutes for applications requiring automotive compliance.

Q: Are all three parts RoHS3 compliant?

A: Yes. The 167472K400A-F, B32529C6472K000, and B32529C6472K289 are all ROHS3 compliant and REACH unaffected. All parts meet current environmental and regulatory requirements.

Q: Which substitute should be selected for high-volume production?

A: B32529C6472K289 is recommended for high-volume automated assembly. Cut Tape packaging enables direct integration with pick-and-place equipment. Inventory availability (12695 pcs) supports sustained production runs.