Phoenix Contact 1672932 Heavy Duty Connector Hood - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1672932 is a heavy-duty connector hood designed for 90° side entry applications with PG11 thread size in the HEAVYCON® D series. This component provides IP54 ingress protection (dust protected, water resistant) and operates across -40°C to 125°C. The part is currently obsolete, making identification of functionally equivalent alternatives essential for system maintenance and component sourcing.

Substiute Parts

1672932

Phoenix ContactIn Stock: 9721672932 Datasheet

Current PartRFQ

1419237

Phoenix ContactIn Stock: 8121419237 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1672932 is determined by the following critical parameters:

Core Compatibility Requirements:

• Connector type: Hood - 90°
• Style: Side Entry
• Size designation: D7
• Thread size: PG11
• Series: HEAVYCON® D
• Operating temperature range: -40°C to 125°C minimum
• Lock location: Locking Clip (1) on Base Bottom

Acceptable Variation Parameters:

• Ingress protection rating (equal or higher protection level)
• Housing material (zinc die cast or aluminum die cast)
• Dimensions (minor variations acceptable if mechanical fit is maintained)
• Product status (active preferred for obsolete parts)
• Compliance certifications (RoHS3 acceptable for RoHS Compliant)

The substitute part must maintain identical connector geometry, thread engagement, and locking mechanism to ensure direct replacement capability in existing installations.

Parameter Comparison

Engineering Selection Recommendations

Part 1419237 as Direct Substitute:

The Phoenix Contact 1419237 qualifies as a functional equivalent for the obsolete 1672932 based on identical core specifications: HEAVYCON® D series, Hood - 90° connector type, side entry configuration, D7 size, and PG11 thread size. Both components operate across the same temperature range (-40°C to 125°C) and maintain identical locking mechanisms.

Advantages of 1419237:

• Active product status ensures ongoing availability and supply chain continuity
• Enhanced ingress protection (IP66/IP67 vs. IP54) provides superior environmental sealing
• ROHS3 compliance meets current regulatory requirements
• Aluminum die cast housing offers improved corrosion resistance with salt water resistance feature
• Minimal dimensional variation (approximately 0.4mm increase in length and width, 4.8mm increase in height) maintains mechanical compatibility in standard mounting configurations

Compliance Alignment: Both parts carry EAR99 ECCN classification and identical HTSUS codes (8538.90.8180), confirming regulatory equivalence for import/export purposes.

Frequently Asked Questions (FAQ)

Q: Can the 1419237 directly replace the obsolete 1672932 in existing installations?

A: Yes. Both components share identical connector type (Hood - 90°), style (side entry), size (D7), thread size (PG11), and locking mechanism (Locking Clip on base bottom). The 1419237 maintains full mechanical and electrical compatibility for direct substitution.

Q: What is the difference in ingress protection between these parts?

A: The 1672932 provides IP54 protection (dust protected, water resistant). The 1419237 provides IP66/IP67 protection (dust tight, water resistant, waterproof). IP66/IP67 represents a higher protection level suitable for more demanding environmental conditions.

Q: Are there dimensional differences that affect installation?

A: Minor dimensional variations exist: the 1419237 is approximately 0.4mm larger in length and width, and 4.8mm taller than the 1672932. These variations are within acceptable tolerances for standard mounting applications and do not compromise mechanical fit or connector engagement.

Q: What is the material difference between the two parts?

A: The 1672932 uses zinc die cast housing, while the 1419237 uses aluminum die cast housing. The aluminum construction in the 1419237 provides enhanced corrosion resistance and includes salt water resistance as a documented feature.

Q: Are both parts RoHS compliant?

A: Yes. The 1672932 is RoHS Compliant, and the 1419237 is ROHS3 Compliant. Both meet current environmental and hazardous substance restrictions for electronic components.

Q: What is the inventory status for these parts?

A: The 1672932 (obsolete) has 958 pieces in stock. The 1419237 (active) has 717 pieces in stock. The active status of 1419237 ensures continued availability for future orders.