Weidmüller 1672710000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1672710000 is a 10-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, and 270° free-hanging in-line configuration. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The part operates within IEC and UL electrical standards and is constructed from polybutylene terephthalate (PBT) housing with copper alloy contacts.

Substiute Parts

1672710000

WeidmüllerIn Stock: 7551672710000 Datasheet

Current PartRFQ

1982200000

WeidmüllerIn Stock: 7611982200000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 1672710000 is determined by strict equivalence across the following critical parameters:

• Connector Type & Configuration: 10-position plug with female sockets, 0.200" (5.08mm) pitch, 270° free-hanging in-line orientation
• Electrical Performance: Voltage and current ratings must meet or exceed IEC 400V/16.5A and UL 300V/10A specifications
• Wire Compatibility: Acceptance of 12-26 AWG (0.2-2.5mm²) wire gauge range
• Environmental & Material Standards: Operating temperature range -50°C ~ 100°C, UL94 V-0 flammability rating, copper alloy contacts, PBT housing
• Termination Interface: Screwless spring-cage or equivalent push-in spring termination

The substitute part 1982200000 meets these criteria while offering enhanced electrical performance and active product status.

Parameter Comparison

Engineering Selection Recommendations

The 1982200000 is a direct functional substitute for the obsolete 1672710000. Selection of the substitute part is supported by the following factors:

• Product Status: The 1982200000 maintains active product status, ensuring continued availability and supply chain reliability
• Electrical Compliance: The substitute exceeds the original part's electrical ratings (24A IEC vs. 16.5A; 18.5A UL vs. 10A), providing enhanced current capacity while maintaining voltage equivalence
• Mechanical & Environmental Compatibility: Identical pitch, position count, wire entry angle, wire gauge acceptance, operating temperature range, and mounting configuration ensure direct mechanical and functional interchangeability
• Material & Safety Certifications: Both parts share identical housing material (PBT), contact material (copper alloy), flammability rating (UL94 V-0), and regulatory compliance (REACH, EAR99)
• Termination Technology: The substitute employs leg spring and push-in spring termination, functionally equivalent to the original tension clamp design for screwless connection

Frequently Asked Questions (FAQ)

Q: Can the 1982200000 be used as a direct replacement for the 1672710000 in existing assemblies?

A: Yes. Both parts share identical mechanical dimensions, pitch, position count, wire entry orientation, and wire gauge compatibility. The substitute's enhanced electrical ratings (24A IEC, 18.5A UL) exceed the original specifications, ensuring compatibility with existing circuit designs.

Q: What is the primary difference between these two parts?

A: The 1982200000 features improved electrical performance (higher current ratings), active product status, and enhanced features including a mounting flange and IP20 ingress protection rating. The original 1672710000 is classified as obsolete.

Q: Are the termination methods compatible?

A: Both parts employ screwless spring-based termination. The 1672710000 uses tension clamp technology, while the 1982200000 uses leg spring and push-in spring technology. Both methods provide equivalent functional performance for wire retention and electrical contact.

Q: Does the substitute part require any design modifications?

A: No design modifications are required. The substitute maintains identical pitch (5.08mm), position count (10), wire gauge range (12-26 AWG), and mounting configuration (free-hanging in-line, 270° wire entry).

Q: What compliance certifications apply to both parts?

A: Both parts comply with UL94 V-0 flammability standards, REACH regulations, and are classified under ECCN EAR99 and HTSUS 8536.90.4000. The substitute additionally carries RoHS compliance and MSL 1 (Unlimited) moisture sensitivity rating.

Q: Is the packaging different between the two parts?

A: The 1672710000 packaging is unspecified in available documentation. The 1982200000 is supplied in box packaging. This difference does not affect functional or mechanical compatibility.