Weidmüller 1672060000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1672060000 is a 14-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, and 270° free-hanging in-line mounting. This component features screwless spring cage termination and is rated for 16.5A (IEC) and 10A (UL) operation. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations where this connector type is required.

Substiute Parts

1672060000

WeidmüllerIn Stock: 8241672060000 Datasheet

Current PartRFQ

1982820000

WeidmüllerIn Stock: 7931982820000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 1672060000 is based on strict alignment of the following critical parameters:

• Connector Type & Configuration: Both parts must be 14-position terminal block plugs with female sockets
• Pitch Specification: 0.200" (5.08mm) pitch is mandatory for mechanical compatibility
• Wire Entry Orientation: 270° free-hanging in-line mounting must be maintained
• Electrical Ratings: Voltage ratings (400V IEC, 300V UL) and wire gauge compatibility (12-26 AWG / 0.2-2.5mm²) must be preserved or exceeded
• Operating Temperature Range: -50°C ~ 100°C operational envelope must be supported
• Housing Material & Flammability: PBT housing with UL94 V-0 rating ensures mechanical and safety compliance
• Contact Material: Copper alloy with tin mating finish maintains electrical performance

The Weidmüller 1982820000 meets all these criteria and is classified as an active product, providing a direct functional equivalent with enhanced electrical ratings.

Parameter Comparison

Engineering Selection Recommendations

The Weidmüller 1982820000 is the appropriate substitute for the obsolete 1672060000. Both components are manufactured by Weidmüller within the Omnimate BL series and maintain identical mechanical and electrical interface specifications. The 1982820000 provides enhanced current ratings (24A IEC, 18.5A UL versus 16.5A IEC, 10A UL) while preserving all voltage and temperature specifications. The substitute part carries active product status with RoHS compliance and IP20 ingress protection rating, ensuring availability and regulatory alignment for current applications. Both parts maintain UL94 V-0 flammability certification and REACH compliance, supporting equivalent safety and environmental standards.

Frequently Asked Questions (FAQ)

Q: Can the 1982820000 directly replace the 1672060000 in existing installations?

A: Yes. Both components share identical mechanical interfaces (14 positions, 5.08mm pitch, 270° free-hanging mounting) and electrical voltage specifications (400V IEC, 300V UL). The substitute part accommodates the same wire gauge range (12-26 AWG / 0.2-2.5mm²) and operating temperature envelope (-50°C ~ 100°C).

Q: What are the differences between these two parts?

A: The primary differences are current ratings and termination style. The 1982820000 provides higher current capacity (24A IEC, 18.5A UL) compared to the 1672060000 (16.5A IEC, 10A UL). The 1982820000 uses leg spring push-in termination versus the 1672060000's tension clamp design. The 1982820000 includes IP20 ingress protection and is RoHS compliant, while the 1672060000 is classified as obsolete.

Q: Are there packaging differences?

A: The 1982820000 is supplied in box packaging. Packaging specifications for the 1672060000 are not provided in the technical data.

Q: Do both parts support the same wire gauges?

A: Yes. Both components accept 12-26 AWG wire (0.2-2.5mm²) with 10mm strip length, ensuring compatibility with existing wiring specifications.

Q: What is the significance of the product status difference?

A: The 1672060000 is classified as obsolete, indicating discontinued manufacturing and limited availability. The 1982820000 maintains active product status, ensuring ongoing availability, technical support, and compliance with current regulatory standards.