Weidmüller 1671290000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1671290000 is a 6-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 90° free-hanging in-line applications. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The part operates within IEC ratings of 16.5A at 400V and UL ratings of 10A at 300V, with wire gauge compatibility from 12-26 AWG (0.2-2.5mm²).

Substiute Parts

1671290000

WeidmüllerIn Stock: 10421671290000 Datasheet

Current PartRFQ

1002130000

WeidmüllerIn Stock: 12911002130000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 1671290000 is determined by the following critical parameters:

• Connector Type & Configuration: Must be a 6-position terminal block plug with female sockets
• Pitch Specification: Must maintain 0.200" (5.08mm) pitch for mechanical compatibility
• Mounting & Orientation: Must support free-hanging in-line mounting with 90° wire entry
• Electrical Ratings: Must meet or exceed IEC 16.5A at 400V and UL 10A at 300V specifications
• Wire Gauge Compatibility: Must accept 12-26 AWG (0.2-2.5mm²) wire sizes
• Material & Compliance: Must maintain PBT housing with UL94 V-0 flammability rating and RoHS compliance

The substitute part Weidmüller 1002130000 satisfies all critical substitution parameters while offering enhanced electrical performance and active product status.

Parameter Comparison

Engineering Selection Recommendations

The Weidmüller 1002130000 is a direct substitute for the obsolete 1671290000. Both components are manufactured by Weidmüller within the Omnimate BL series and maintain identical mechanical and pitch specifications. The substitute part provides enhanced electrical performance with IEC current rating of 24A (versus 16.5A) and UL current rating of 18.5A (versus 10A), while maintaining voltage specifications at 400V IEC and 300V UL.

The 1002130000 holds active product status, ensuring ongoing availability and supply chain continuity. Both parts maintain RoHS compliance and REACH unaffected status, satisfying regulatory requirements. The substitute incorporates a mating flange and wire-side retention latches with improved termination technology (leg spring, push-in spring versus tension clamp), along with IP20 ingress protection rating.

Frequently Asked Questions (FAQ)

Q: Can the 1002130000 directly replace the 1671290000 in existing applications?

A: Yes. Both components share identical pitch (0.200"/5.08mm), connector type (6-position plug with female sockets), mounting configuration (free-hanging in-line), and wire entry angle (90°). Wire gauge compatibility (12-26 AWG / 0.2-2.5mm²) and operating temperature range (-50°C to 100°C) are identical. The substitute meets or exceeds all electrical specifications of the original part.

Q: What are the differences in termination technology between these parts?

A: The 1671290000 uses screwless tension clamp termination, while the 1002130000 employs leg spring push-in spring termination. Both are screwless systems. The 1002130000 includes a mating flange and wire-side retention latches, compared to non-wire side retention latches on the original part.

Q: Does the substitute part offer improved electrical performance?

A: Yes. The 1002130000 provides higher current ratings: 24A at 400V (IEC) compared to 16.5A, and 18.5A at 300V (UL) compared to 10A. Voltage ratings remain equivalent at 400V (IEC) and 300V (UL).

Q: Are there packaging differences between these parts?

A: The 1671290000 is supplied without specified packaging, while the 1002130000 is packaged in boxes. This does not affect functional compatibility.

Q: What is the ingress protection rating difference?

A: The 1671290000 has no specified ingress protection rating. The 1002130000 provides IP20 ingress protection, offering enhanced environmental sealing.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the 1671290000 and 1002130000 are RoHS compliant and REACH unaffected, meeting current regulatory requirements for electronic components.