TE Connectivity AMP Connectors 1-6610095-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-6610095-1 is an 8-port RJ45 modular connector jack designed for 10/100 Base-T Ethernet applications. This connector features through-hole mounting with a 90° right-angle orientation and is housed in the Mag45 series. The product is currently classified as obsolete, making identification of equivalent and substitute components essential for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

1-6610095-1

TE Connectivity AMP ConnectorsIn Stock: 11071-6610095-1 Datasheet

Current PartRFQ

L834-1G1T-S7

Bel Fuse Inc.In Stock: 1696L834-1G1T-S7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1-6610095-1 is determined by the following critical parameters:

Connector Interface Compatibility:

• RJ45 connector type (maintained across substitutes)
• Through-hole solder termination (maintained)
• 90° right-angle orientation (maintained)
• Shielded construction with EMI finger protection (maintained)

Electrical Performance:

• Operating temperature range 0°C ~ 70°C (maintained)
• Gold contact finish for reliable signal transmission (maintained)
• EMI shielding characteristics (maintained)

Mechanical Compatibility:

• PCB mounting footprint alignment
• Board lock feature (maintained)
• Solder termination compatibility

The substitute part L834-1G1T-S7 from Bel Fuse Inc. maintains core RJ45 connector functionality and through-hole solder mounting. However, this substitute differs in port configuration (1 port versus 8 ports) and supported applications (10/100/1000 Base-T with AutoMDIX versus 10/100 Base-T). These differences require evaluation based on specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The TE Connectivity 1-6610095-1 is classified as obsolete. The Bel Fuse Inc. L834-1G1T-S7 is an active product with current manufacturing support and availability.

Compliance and Certification: The L834-1G1T-S7 holds ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for new designs and procurement. The 1-6610095-1 carries no applicable RoHS status and vendor-undefined REACH status, reflecting its obsolete classification.

Application Scope: The 1-6610095-1 supports 10/100 Base-T applications exclusively. The L834-1G1T-S7 supports 10/100/1000 Base-T with AutoMDIX capability, providing backward compatibility with legacy 10/100 Base-T systems while enabling forward compatibility with Gigabit Ethernet infrastructure.

Port Configuration: The primary distinction is port count: the 1-6610095-1 provides 8 ports in a single connector, while the L834-1G1T-S7 provides 1 port. System designs requiring 8-port consolidation cannot be directly replaced by a single-port substitute without architectural modification.

Physical Compatibility: Both connectors maintain through-hole solder termination, 90° right-angle orientation, and board lock features. Height above board differs by 0.097" (2.46mm), requiring PCB layout verification for clearance-constrained applications.

Frequently Asked Questions (FAQ)

Q: Can the L834-1G1T-S7 directly replace the 1-6610095-1 in existing designs?

A: Direct replacement is not possible due to port count difference. The 1-6610095-1 is an 8-port connector, while the L834-1G1T-S7 is a single-port connector. System designs must be re-architected to accommodate single-port substitutes, requiring multiple connectors to achieve equivalent port density.

Q: Are the solder footprints compatible between these two connectors?

A: Both connectors use through-hole solder termination with 90° right-angle orientation. However, the 8-port versus 1-port configuration results in fundamentally different PCB footprints. PCB layout redesign is required for substitution.

Q: What is the significance of the operating temperature range match?

A: Both connectors operate within the 0°C ~ 70°C range, ensuring thermal compatibility for applications within this specification. This parameter is maintained across the substitution.

Q: Does the L834-1G1T-S7 support legacy 10/100 Base-T applications?

A: Yes. The L834-1G1T-S7 supports 10/100/1000 Base-T with AutoMDIX, which includes backward compatibility with 10/100 Base-T systems. AutoMDIX capability enables automatic medium-dependent interface crossover detection, providing enhanced flexibility in legacy network environments.

Q: What is the difference in contact finish thickness between these connectors?

A: The 1-6610095-1 has 50.0µin (1.27µm) gold contact finish thickness, while the L834-1G1T-S7 has 30.0µin (0.76µm). Both thicknesses provide adequate gold plating for reliable electrical contact and corrosion resistance in their respective applications.

Q: Why is RoHS compliance status different between these parts?

A: The 1-6610095-1 is obsolete and predates current RoHS3 requirements, resulting in "Not applicable" status. The L834-1G1T-S7 is an active product manufactured to current ROHS3 compliance standards, reflecting modern environmental and regulatory requirements.

Q: Are there packaging differences between these connectors?

A: The 1-6610095-1 packaging information is not specified in available data. The L834-1G1T-S7 is supplied in tray packaging. Packaging format may affect procurement, handling, and inventory management procedures.

Q: What is the height difference above the PCB, and does it matter?

A: The 1-6610095-1 has a height of 0.545" (13.84mm) above board, while the L834-1G1T-S7 has a height of 0.448" (11.38mm). The 0.097" (2.46mm) difference requires verification in applications with vertical space constraints, such as stacked board assemblies or enclosure-limited designs.