TE Connectivity Corcom Filters 1-6609211-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Corcom Filters 1-6609211-3 is a modular jack connector designed for 8p8c (RJ45, Ethernet) applications with 90° right-angle orientation and shielded construction. This connector features through-hole solder termination, board guide, filter, and panel stops. The part is classified as obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements.

Substiute Parts

1-6609211-3

TE Connectivity Corcom FiltersIn Stock: 12531-6609211-3 Datasheet

Current PartRFQ

5558342-1

TE Connectivity AMP ConnectorsIn Stock: 26935558342-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 1-6609211-3 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Connector type: Jack
• Contact configuration: 8p8c (RJ45, Ethernet)
• Contact material: Phosphor Bronze
• Contact finish: Gold at 50.0µin (1.27µm) thickness
• Shielding: Shielded construction

Mechanical Parameters:

• Orientation: 90° Angle (Right)
• Mounting type: Through Hole
• Termination method: Solder
• Tab direction: Down
• Number of ports: 1
• Number of rows: 1

Physical Parameters:

• Contact finish thickness: 50.0µin (1.27µm)

The substitute part TE Connectivity AMP Connectors 5558342-1 satisfies all critical electrical and mechanical parameters required for direct substitution. This part maintains identical connector type, contact configuration, orientation, mounting method, termination type, shielding, contact materials, and finish specifications.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 5558342-1 is the direct functional equivalent for the obsolete 1-6609211-3. Selection of the substitute part is based on the following engineering criteria:

Product Status: The main part 1-6609211-3 carries obsolete status, while the substitute 5558342-1 maintains active product status with current manufacturing support and availability.

Compliance and Certifications: Both parts maintain identical REACH status (REACH Unaffected) and ECCN classification (EAR99), ensuring equivalent regulatory compliance. Both parts share the same HTSUS code (8536.69.4040), confirming tariff classification equivalence.

Electrical and Mechanical Compatibility: The substitute part maintains complete parameter equivalence across all critical electrical specifications (connector type, contact configuration, contact materials, finish specifications, and shielding) and mechanical specifications (orientation, mounting type, termination method, and tab direction).

Inventory and Availability: The substitute part 5558342-1 is available with 2668 pieces in new original stock, providing immediate procurement capability compared to the obsolete main part with limited remaining inventory.

Housing Material Difference: The substitute part utilizes Polyamide (PA) Nylon housing material compared to the main part's Polyester Glass Filled housing. Both materials are suitable for modular connector applications and do not affect electrical or mechanical compatibility.

Operating Temperature: The substitute part specifies operating temperature range of -40°C to 85°C, providing defined thermal performance parameters for the substitute part.

Frequently Asked Questions (FAQ)

Q: Can the 5558342-1 be used as a direct replacement for the 1-6609211-3 in existing designs?

A: Yes. The 5558342-1 maintains complete electrical and mechanical equivalence across all critical parameters including connector type, contact configuration, orientation, mounting method, termination type, shielding, contact materials, and finish specifications. The parts are functionally interchangeable.

Q: What is the difference in housing material between the two parts?

A: The main part 1-6609211-3 uses Polyester Glass Filled housing, while the substitute 5558342-1 uses Polyamide (PA) Nylon housing. Both materials are suitable for modular connector applications and do not affect electrical or mechanical performance in standard Ethernet applications.

Q: Are there compliance or regulatory differences between these parts?

A: No. Both parts maintain identical REACH status (REACH Unaffected), ECCN classification (EAR99), and HTSUS code (8536.69.4040). Regulatory compliance is equivalent.

Q: What is the packaging difference?

A: The main part 1-6609211-3 packaging is not specified in the available data. The substitute part 5558342-1 is supplied in Tray packaging.

Q: Why is the main part listed as obsolete?

A: The 1-6609211-3 carries obsolete product status. The substitute part 5558342-1 maintains active product status with current manufacturing support.

Q: Are the contact specifications identical?

A: Yes. Both parts use Phosphor Bronze contact material with Gold finish at 50.0µin (1.27µm) thickness, ensuring identical electrical contact performance.

Q: What is the Cat5e rating on the substitute part?

A: The substitute part 5558342-1 is rated for Cat5e performance, indicating suitability for standard Ethernet applications. This rating does not affect mechanical or electrical compatibility with the main part specification.

Q: Is the moisture sensitivity level different?

A: The main part 1-6609211-3 lists Moisture Sensitivity Level as Not Applicable. The substitute part 5558342-1 specifies MSL 1 (Unlimited), indicating no moisture sensitivity constraints for either part.

Q: Are both parts suitable for through-hole PCB assembly?

A: Yes. Both parts are specified for through-hole mounting with solder termination, suitable for standard PCB assembly processes.

Q: What is the inventory status for procurement?

A: The main part 1-6609211-3 has 1154 pieces available as new original stock. The substitute part 5558342-1 has 2668 pieces available as new original stock, providing greater availability for new procurement.