TE Connectivity AMP Connectors 1658528-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1658528-2 is a 10 Position Rectangular Receptacle Connector with IDC (Insulation Displacement Contact) termination and gold plating. This connector is designed for ribbon cable applications with wire gauges of 26-28 AWG in stranded or solid configuration. The part is currently active in production status and maintains full RoHS3 compliance with unlimited moisture sensitivity rating. Substitute parts are identified when equivalent functional performance is required due to inventory constraints, design revisions, or application-specific requirements while maintaining compatibility with the core electrical and mechanical specifications.

Substiute Parts

1658528-2

TE Connectivity AMP ConnectorsIn Stock: 10151658528-2 Datasheet

Current PartRFQ

71600-010LF

Amphenol ICC (FCI)In Stock: 697571600-010LF Datasheet

SimilarRFQ

71600-310LF

Amphenol ICC (FCI)In Stock: 393171600-310LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 1658528-2 is determined by the following critical parameters that must remain constant across all equivalent parts:

Fixed Parameters (Non-Negotiable):

• Connector Type: Receptacle
• Number of Positions: 10
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Cable Termination: IDC
• Wire Type: Ribbon Cable
• Contact Finish: Gold
• Mounting Type: Free Hanging (In-Line)
• Contact Type: Female Socket

Variable Parameters (Allowable Substitution Range):

• Wire Gauge: 26-28 AWG (main part) to 28-30 AWG (substitute parts) — acceptable overlap at 28 AWG
• Contact Finish Thickness: 15.0µin to 30.0µin — substitute parts provide enhanced plating
• Color: Black (main part) to Gray (substitute parts) — cosmetic variation
• Series: AMP-Latch (main part) to Quickie™ (substitute parts) — different product lines with compatible form factors
• Packaging: Bulk (main part) to Tube (substitute parts) — distribution format only

The identified substitute parts (71600-010LF and 71600-310LF) maintain full mechanical and electrical compatibility through shared pitch, position count, row configuration, and IDC termination methodology.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (1658528-2): The TE Connectivity 1658528-2 is the specified component for applications requiring 26-28 AWG ribbon cable termination with the AMP-Latch series form factor. This part maintains active production status and full ROHS3 compliance. Selection of this part is appropriate when inventory availability is confirmed and the specific wire gauge range is a design requirement.

Substitute Part Selection (71600-010LF or 71600-310LF): The Amphenol ICC Quickie™ series connectors (71600-010LF and 71600-310LF) are functionally equivalent substitutes for applications where 28-30 AWG ribbon cable termination is acceptable. Both substitute parts maintain active production status, full RoHS compliance, and identical mechanical form factors. The 71600-010LF carries REACH Affected status, while the 71600-310LF carries REACH Unaffected status. Selection between these two substitutes should be based on REACH compliance requirements for the end application.

Wire Gauge Compatibility: The overlap at 28 AWG between the main part specification (26-28 AWG) and substitute part specification (28-30 AWG) establishes the substitution window. Applications utilizing 28 AWG ribbon cable can use either the main part or substitute parts interchangeably. Applications requiring 26-27 AWG must use the main part 1658528-2. Applications requiring 29-30 AWG must use the substitute parts.

Contact Finish Consideration: Substitute parts provide doubled contact finish thickness (30.0µin versus 15.0µin), which enhances durability and contact resistance performance in high-cycle mating applications.

Frequently Asked Questions (FAQ)

Q: Can the 71600-010LF or 71600-310LF be used as direct replacements for the 1658528-2?

A: Direct replacement is possible only when the application uses 28 AWG ribbon cable. The substitute parts are rated for 28-30 AWG, which overlaps with the main part's 26-28 AWG specification at 28 AWG. Applications using 26-27 AWG wire require the original 1658528-2 part.

Q: What is the difference between the two substitute parts (71600-010LF and 71600-310LF)?

A: Both parts are mechanically and electrically identical with the same connector specifications, wire gauge range, and contact finish thickness. The primary difference is REACH compliance status: 71600-010LF is REACH Affected, while 71600-310LF is REACH Unaffected. Selection depends on regulatory requirements for the end application and geographic market.

Q: Are there mechanical compatibility issues when substituting between manufacturers?

A: No. Both the TE Connectivity AMP-Latch and Amphenol ICC Quickie™ series maintain identical pitch (0.100"), position count (10), row configuration (2 rows), and row spacing (0.100"). The connectors are mechanically interchangeable at the mating interface.

Q: Does the color difference (Black versus Gray) affect functionality?

A: No. Color is a cosmetic parameter only and does not affect electrical or mechanical performance. The color difference reflects different product line aesthetics between manufacturers.

Q: Why do the substitute parts have thicker gold plating?

A: The substitute parts feature 30.0µin contact finish thickness compared to the main part's 15.0µin thickness. This enhanced plating provides increased durability and improved contact resistance characteristics, particularly beneficial in applications with frequent mating cycles.

Q: What is the significance of the MSL rating of 1 (Unlimited)?

A: MSL 1 indicates that the connector has unlimited shelf life and requires no special moisture control during storage or handling. All three parts (main and substitutes) carry this rating, confirming equivalent moisture sensitivity performance.

Q: Can these connectors be used with solid wire, stranded wire, or both?

A: The main part 1658528-2 explicitly supports both stranded and solid wire configurations within the 26-28 AWG range. The substitute parts (71600-010LF and 71600-310LF) are specified for 28-30 AWG ribbon cable without explicit mention of solid versus stranded configuration. Verify wire type compatibility with the substitute parts for applications requiring solid wire at 28 AWG.

Q: Are all three parts currently in production?

A: Yes. All three parts maintain active product status. The main part 1658528-2 has 987 pieces in stock, while 71600-010LF has 6901 pieces and 71600-310LF has 3870 pieces in inventory.