Phoenix Contact 1652949 Modular Connector - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1652949 is a modular jack connector with 8 positions/8 contacts (RJ45, Ethernet) configuration, designed for shielded Cat6 applications. This connector features straight orientation, IDC termination, and is housed in polycarbonate material with gold-plated copper alloy contacts. The product is currently obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for continued system support and new installations.

Substiute Parts

1652949

Phoenix ContactIn Stock: 10181652949 Datasheet

Current PartRFQ

1652936

Phoenix ContactIn Stock: 7711652936 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1652949 is determined by the following critical parameters:

Primary Compatibility Criteria:

• Connector type: Jack
• Contact configuration: 8p8c (RJ45, Ethernet)
• Orientation: Straight
• Termination method: IDC
• Shielding: Shielded
• Mounting requirement: Requires Holder
• Housing material: Polycarbonate (PC)
• Contact material: Copper Alloy
• Contact finish: Gold
• Operating temperature range: -20°C ~ 70°C
• Ingress protection: IP20
• Series: PLUSCON VS

Secondary Consideration:

• Category rating (Cat5e or Cat6): Determines maximum bandwidth capability; Cat5e-rated connectors are backward compatible with Cat6 applications but with reduced performance specifications.

The substitute part Phoenix Contact 1652936 maintains all primary compatibility criteria. The distinction lies in the category rating: the 1652936 is rated for Cat5e, whereas the original 1652949 is rated for Cat6. This difference reflects the maximum supported bandwidth, with Cat5e supporting up to 100 Mbps and Cat6 supporting up to 1 Gbps.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1652936 is the active equivalent for the obsolete 1652949. Both connectors share identical mechanical and electrical specifications within the PLUSCON VS series, with the primary distinction being the category rating.

Selection Basis:

For applications requiring Cat6 performance specifications (1 Gbps bandwidth), the 1652949 remains the specified part. However, given its obsolete status, the 1652936 (Cat5e-rated) provides mechanical and electrical compatibility for systems operating at Cat5e performance levels or lower.

The 1652936 carries ROHS3 compliance, representing current regulatory alignment, whereas the 1652949 carries RoHS compliance. Both connectors meet the same operating temperature range, ingress protection rating, and contact material specifications.

Inventory availability: 1652936 has 686 units in stock (active status), while 1652949 has 979 units remaining (obsolete status).

Frequently Asked Questions (FAQ)

Q: Can the 1652936 (Cat5e) replace the 1652949 (Cat6) in existing installations?

A: The 1652936 is mechanically and electrically compatible with the 1652949. However, the Cat5e rating limits bandwidth to 100 Mbps compared to Cat6's 1 Gbps capability. Substitution is appropriate for applications not requiring Cat6 performance specifications.

Q: What are the key differences between these two connectors?

A: The connectors are identical in all mechanical and electrical parameters except for category rating. The 1652949 is rated Cat6, while the 1652936 is rated Cat5e. Both feature 8p8c RJ45 configuration, shielding, IDC termination, straight orientation, and identical contact materials and finishes.

Q: Why is the 1652949 listed as obsolete?

A: Product obsolescence is determined by manufacturer lifecycle decisions. The 1652936 serves as the active alternative within the PLUSCON VS series for continued procurement and new designs.

Q: Are there packaging differences between these parts?

A: The 1652949 packaging is listed as unspecified, while the 1652936 is supplied in bulk packaging. Both are from the same manufacturer and series.

Q: Do both connectors meet current compliance standards?

A: The 1652936 carries ROHS3 compliance, representing current regulatory requirements. The 1652949 carries RoHS compliance. Both meet the specified operating temperature range and ingress protection ratings.

Q: What is the mounting requirement for these connectors?

A: Both connectors require a holder for mounting. This is a standard requirement for modular jack connectors in the PLUSCON VS series.