TE Connectivity AMP Connectors 1-644898-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-644898-0 is a rectangular connector header designed for through-hole, right-angle mounting applications. This shrouded 10-position connector operates at 0.100" (2.54mm) pitch and is rated for 250VAC operation across a temperature range of -55°C to 105°C. The connector features gold-plated mating contacts and tin-plated posts with solder termination, making it suitable for general purpose and lighting applications. As an active product with 967 units in stock, equivalent and substitute parts are identified to provide design flexibility, support supply chain alternatives, and accommodate specific application requirements such as RoHS compliance or alternative fastening mechanisms.

Substiute Parts

1-644898-0

TE Connectivity AMP ConnectorsIn Stock: 10161-644898-0 Datasheet

Current PartRFQ

0901362210

MolexIn Stock: 24380901362210 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1-644898-0 with the Molex 0901362210 is based on alignment of the following critical parameters:

Matching Parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 10
• Number of Rows: 1
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Contact Finish - Mating: Gold
• Contact Finish - Post: Tin
• Insulation Material: Polyester (with glass fill in substitute)
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• ECCN Classification: EAR99
• HTSUS Code: 8536.69.4040

The Molex 0901362210 maintains functional and mechanical compatibility with the TE Connectivity part across all critical mating and mounting parameters. Differences in contact dimensions, fastening mechanism (Latch Holder versus Friction Lock), and compliance certifications are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 1-644898-0 Selection Criteria:

• Primary choice for applications requiring RoHS non-compliant components or where legacy design specifications mandate TE Connectivity AMP Connectors CST-100 series
• Suitable when specific contact dimensions (0.280" mating length, 0.130" post length) and friction lock fastening are design requirements
• Appropriate for applications with defined voltage (250VAC) and temperature (-55°C to 105°C) operating parameters

Molex 0901362210 Selection Criteria:

• Preferred for new designs requiring ROHS3 compliance and REACH unaffected status
• Suitable when latch holder fastening mechanism is compatible with application requirements
• Appropriate for applications where higher inventory availability (2351 units) supports supply chain continuity
• Compatible with applications tolerating slightly reduced contact dimensions and alternative contact material (brass versus copper alloy)
• Tray packaging format supports automated assembly processes

Both parts maintain active product status and share identical connector topology, pitch, shrouding, and flammability ratings. Selection between these parts depends on regulatory compliance requirements, fastening mechanism compatibility, and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0901362210 be used as a direct replacement for the TE Connectivity 1-644898-0?

A: The Molex 0901362210 is functionally compatible as a substitute based on matching connector type, contact type, position count, pitch, mounting orientation, shrouding, and termination method. However, differences in contact dimensions, fastening mechanism (latch holder versus friction lock), and compliance certifications require design verification for specific applications.

Q: What are the key differences between these two parts?

A: Primary differences include: fastening type (Friction Lock versus Latch Holder), contact dimensions (mating length 0.280" versus 0.266", post length 0.130" versus 0.114"), contact material (Copper Alloy versus Brass), insulation material composition (Polyester versus Polyester with glass fill), contact finish thickness on mating surfaces (30.0µin versus 15.0µin), RoHS compliance status (non-compliant versus ROHS3 compliant), and packaging format (unspecified versus Tray).

Q: Which part should be selected for new product designs?

A: For new designs, the Molex 0901362210 is recommended due to ROHS3 compliance and REACH unaffected status, which align with current regulatory requirements. The TE Connectivity 1-644898-0 is appropriate for legacy designs or applications where RoHS non-compliance is acceptable.

Q: Are the contact dimensions interchangeable between these parts?

A: Contact dimensions differ between the two parts. The TE Connectivity 1-644898-0 has a mating contact length of 0.280" (7.11mm) and post length of 0.130" (3.30mm), while the Molex 0901362210 has a mating contact length of 0.266" (6.75mm) and post length of 0.114" (2.90mm). These dimensional differences may affect mating depth and board layout considerations.

Q: What is the difference in fastening mechanisms?

A: The TE Connectivity 1-644898-0 uses a Friction Lock fastening type, while the Molex 0901362210 uses a Latch Holder fastening type. These mechanisms provide different retention characteristics and may require different mating connector designs.

Q: Are both parts suitable for the same voltage and temperature ranges?

A: The TE Connectivity 1-644898-0 specifies 250VAC voltage rating and -55°C to 105°C operating temperature range. The Molex 0901362210 does not provide voltage rating or operating temperature specifications in the available data. Applications requiring defined voltage and temperature parameters should reference the TE Connectivity part specifications or obtain complete Molex specifications from the manufacturer.

Q: What packaging formats are available?

A: The TE Connectivity 1-644898-0 packaging format is not specified. The Molex 0901362210 is supplied in Tray packaging, which supports automated assembly processes and bulk handling.

Q: How do the RoHS and REACH compliance statuses differ?

A: The TE Connectivity 1-644898-0 is RoHS non-compliant with vendor-undefined REACH status. The Molex 0901362210 is ROHS3 compliant and REACH unaffected. Applications subject to RoHS or REACH regulations must use the Molex part or confirm compliance requirements with the TE Connectivity manufacturer.

Q: What is the inventory availability for each part?

A: The TE Connectivity 1-644898-0 has 967 units in stock. The Molex 0901362210 has 2351 units in stock, providing greater supply chain availability for high-volume applications.