Weidmüller 1636010000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1636010000 is a 9-position terminal block plug with female sockets, 5.00mm pitch, and 90° wire entry orientation. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing system maintenance and new designs requiring compatible connectivity solutions. The part features screw-clamping termination, free-hanging mounting, and operates across -50°C to 100°C with IEC ratings of 15A at 400V and UL ratings of 10A at 300V.

Substiute Parts

1636010000

WeidmüllerIn Stock: 11351636010000 Datasheet

Current PartRFQ

1958190000

WeidmüllerIn Stock: 12761958190000 Datasheet

DirectRFQ

OSTVM095551

On Shore Technology Inc.In Stock: 755OSTVM095551 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 1636010000 is determined by the following critical parameters:

Direct Compatibility Requirements:

• 9-position configuration
• Female socket type
• Screw-based termination
• Free-hanging mounting orientation
• M2.5 screw size
• Copper alloy contact material
• UL94 V-0 flammability rating
• Compatible wire gauge ranges (minimum 12 AWG support)
• Operating temperature range overlap (-50°C minimum)

Weidmüller 1958190000 qualifies as a direct substitute. This active-status part maintains identical position count, socket type, termination method, and mounting configuration. It exceeds the original specifications in current capacity (23A IEC, 20A UL), voltage rating (400V IEC, 300V UL), and wire gauge range (12-30 AWG, 0.2-4mm²). The part is RoHS compliant and carries MSL 1 rating, indicating superior environmental performance compared to the obsolete original.

On Shore Technology OSTVM095551 is classified as a similar substitute with notable parameter deviations. While maintaining 9-position configuration, female sockets, and free-hanging mounting, this part differs in pitch (5.08mm vs. 5.00mm), wire entry orientation (180° vs. 90°), and termination method (pressure clip vs. clamping yoke). Contact material is steel rather than copper alloy, and wire gauge support is narrower (12-22 AWG). These differences require mechanical and electrical verification before deployment.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement: Weidmüller 1958190000 is the recommended substitute for the obsolete 1636010000. Both parts are manufactured by Weidmüller within the Omnimate BL series, ensuring mechanical and electrical compatibility. The 1958190000 is active-status with RoHS compliance and improved current ratings (23A IEC, 20A UL), providing enhanced performance margins. Identical pitch (5.00mm), wire entry orientation (90°), and termination method (screw-clamping yoke) ensure drop-in compatibility. The expanded wire gauge range (12-30 AWG vs. 12-26 AWG) accommodates broader conductor sizes without modification.

For Alternative Applications: On Shore Technology OSTVM095551 serves as a functional alternative where mechanical constraints permit 180° wire entry and 5.08mm pitch spacing. This part maintains 9-position configuration, female socket type, and free-hanging mounting. However, the 0.08mm pitch deviation and different termination method (pressure clip) require mechanical verification. The narrower wire gauge support (12-22 AWG) and steel contact material (versus copper alloy) represent performance trade-offs. ROHS3 compliance and active product status support long-term availability.

Both substitute parts carry UL94 V-0 flammability certification, REACH unaffected status, and M2.5 screw specifications, meeting core regulatory and safety requirements.

Frequently Asked Questions (FAQ)

Q: Can Weidmüller 1958190000 replace 1636010000 without modification?

A: Yes. Both parts share identical pitch (5.00mm), wire entry orientation (90°), termination method (screw-clamping yoke), and mounting type (free-hanging). The 1958190000 maintains full mechanical and electrical compatibility while offering improved current ratings and RoHS compliance.

Q: What are the key differences between 1958190000 and OSTVM095551?

A: The primary differences are pitch (5.00mm vs. 5.08mm), wire entry orientation (90° vs. 180°), termination method (clamping yoke vs. pressure clip), contact material (copper alloy vs. steel), and wire gauge range (12-30 AWG vs. 12-22 AWG). These differences require mechanical layout verification before substitution.

Q: Is OSTVM095551 a direct substitute for 1636010000?

A: No. While OSTVM095551 maintains 9-position configuration and female socket type, the 5.08mm pitch and 180° wire entry orientation differ from the original 5.00mm pitch and 90° orientation. Mechanical compatibility must be verified in the specific application.

Q: What is the significance of the pitch difference between 5.00mm and 5.08mm?

A: The 0.08mm difference represents a 1.6% spacing variation. In multi-position connectors, this accumulates across nine positions, resulting in approximately 0.72mm total dimensional deviation. This may affect mating with corresponding receptacles or mounting in constrained spaces.

Q: Are all substitute parts RoHS compliant?

A: Weidmüller 1958190000 is RoHS compliant. On Shore Technology OSTVM095551 is ROHS3 compliant. The original 1636010000 does not specify RoHS status. Both active-status substitutes meet current environmental regulations.

Q: What wire gauges are supported by each part?

A: 1636010000 supports 12-26 AWG (0.5-2.5mm²). Weidmüller 1958190000 supports 12-30 AWG (0.2-4mm²), offering broader range. On Shore Technology OSTVM095551 supports 12-22 AWG, providing narrower range.

Q: Do all parts use the same screw size?

A: Yes. All three parts use M2.5 screws with 0.4-0.5 Nm torque specification (OSTVM095551 specifies 0.4 Nm minimum). This ensures consistent assembly procedures.

Q: What is the operating temperature range for each part?

A: 1636010000 and 1958190000 both operate -50°C to 100°C. OSTVM095551 operates -30°C to 105°C. The OSTVM095551 has a higher upper temperature limit but does not support the -50°C lower limit of the Weidmüller parts.