TE Connectivity AMP Connectors 163554-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 163554-6 is a socket contact connector designed for the MATE-N-LOK rectangular connector series. This component is a stamped socket contact rated for 18-22 AWG wire gauges with tin contact finish and crimp termination. The part is classified as obsolete, making identification of equivalent and substitute components necessary for ongoing system maintenance, repair, and legacy design support. Substitute parts must maintain compatibility with the MATE-N-LOK connector system while accommodating the specified electrical and mechanical parameters.

Substiute Parts

163554-6

TE Connectivity AMP ConnectorsIn Stock: 1061163554-6 Datasheet

Current PartRFQ

163300-2

TE Connectivity AMP ConnectorsIn Stock: 776163300-2 Datasheet

SimilarRFQ

61314-1

TE Connectivity AMP ConnectorsIn Stock: 6695961314-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 163554-6 are identified based on the following critical parameters that determine functional compatibility within the MATE-N-LOK connector system:

Primary Compatibility Criteria:

• Socket contact type (Pin or Socket designation)
• Crimp termination method
• Tin contact finish
• MATE-N-LOK series membership
• Wire gauge overlap or compatibility range

Substitution Logic:

The 163554-6 operates within a 18-22 AWG wire gauge specification. Substitute parts are qualified when they maintain socket contact configuration, crimp termination, and tin finish while accommodating wire gauges that overlap or extend the operational range. Parts designated as active product status with current manufacturing support are prioritized for applications requiring ongoing component availability.

Two substitute parts meet these criteria:

1. 163300-2: Operates at 17-20 AWG with partial overlap in the 18-20 AWG range
2. 61314-1: Operates at 18-24 AWG with complete overlap across the 18-22 AWG range

Both substitutes maintain socket contact configuration, crimp termination, tin finish, and MATE-N-LOK series compatibility.

Parameter Comparison

Engineering Selection Recommendations

For 18-20 AWG Applications:

The 163300-2 substitute part is suitable for applications requiring wire gauges within the 18-20 AWG overlap range. This part carries active product status with current manufacturing support and ROHS3 compliance, providing long-term availability for legacy system maintenance. Packaging is supplied in Tape & Reel format.

For 18-22 AWG Applications (Full Range Coverage):

The 61314-1 substitute part provides complete coverage across the full 18-22 AWG specification of the original 163554-6. This part is designated as active product status with current manufacturing support and RoHS compliance. The 18-24 AWG wire gauge range encompasses the original specification without restriction. Packaging is supplied in Cut Tape format.

Product Status Consideration:

Both substitute parts are classified as active products with current manufacturing support, eliminating the obsolescence risk associated with the 163554-6. Selection between the two substitutes should be based on specific wire gauge requirements within the application and packaging format compatibility with assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the 163300-2 be used as a direct replacement for the 163554-6 in all applications?

A: The 163300-2 operates at 17-20 AWG, which overlaps the 163554-6 specification in the 18-20 AWG range. Applications requiring wire gauges of 21-22 AWG cannot use this substitute. The 61314-1 provides full-range coverage for all 18-22 AWG applications.

Q: What is the wire gauge overlap between the main part and substitute parts?

A: The 163554-6 operates at 18-22 AWG. The 163300-2 overlaps at 18-20 AWG. The 61314-1 overlaps completely at 18-22 AWG and extends to 24 AWG.

Q: Are both substitute parts compatible with the MATE-N-LOK connector system?

A: Yes. Both 163300-2 and 61314-1 are designated as MATE-N-LOK series components with socket contact configuration, crimp termination, and tin finish, maintaining mechanical and electrical compatibility within the connector system.

Q: What is the difference in packaging between the substitute parts?

A: The 163300-2 is supplied in Tape & Reel (TR) packaging format. The 61314-1 is supplied in Cut Tape (CT) packaging format. Packaging selection should align with assembly equipment and process requirements.

Q: Why is the 163554-6 classified as obsolete?

A: The 163554-6 is no longer in active production. Both substitute parts are classified as active products with current manufacturing support, providing continuity for legacy system applications.

Q: Do the substitute parts meet the same compliance standards as the original part?

A: Both substitute parts maintain RoHS compliance. The 163300-2 carries ROHS3 compliance, representing the current RoHS standard. Both parts are classified under ECCN EAR99, matching the original part's export classification.