TE Connectivity AMP Connectors 163085-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 163085-2 is an active pin contact designed for the Multimate III+ connector series. This stamped brass contact with gold finish is rated for 20-24 AWG wire gauges and utilizes crimp termination technology. The part is supplied in Tape & Reel packaging and maintains ROHS3 compliance with unlimited moisture sensitivity rating (MSL 1). Finding equivalent substitute parts is necessary to address packaging preferences, inventory availability, or procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

163085-2

TE Connectivity AMP ConnectorsIn Stock: 915163085-2 Datasheet

Current PartRFQ

163086-2

TE Connectivity AMP ConnectorsIn Stock: 3860163086-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 163085-2 is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part 163086-2 maintains identical specifications for contact type, termination method, wire gauge rating, contact material, finish type, finish thickness, manufacturing process, and compliance certifications. The primary difference between these parts is packaging configuration: the main part is supplied in Tape & Reel format, while the substitute is supplied in Bulk packaging. Both parts belong to the Multimate III+ series and are manufactured by TE Connectivity AMP Connectors.

Substitution is valid when the following parameters are identical:

• Contact type (Pin)
• Contact termination (Crimp)
• Wire gauge rating (20-24 AWG)
• Contact material (Brass)
• Contact finish (Gold)
• Contact finish thickness (31.5µin / 0.80µm)
• Manufacturing type (Stamped)
• Series designation (Multimate III+)
• RoHS compliance status (ROHS3 Compliant)
• Moisture sensitivity level (MSL 1)

Parameter Comparison

Engineering Selection Recommendations

Both the 163085-2 and 163086-2 are active products manufactured by TE Connectivity AMP Connectors with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and procurement workflow:

The 163085-2 in Tape & Reel packaging is suitable for automated assembly processes and high-volume production environments where component feeding and placement automation is utilized.

The 163086-2 in Bulk packaging is suitable for manual assembly operations, kit assembly, or applications where individual component handling is preferred.

Both parts maintain ROHS3 compliance and are suitable for applications requiring environmental regulatory adherence. The MSL 1 rating indicates unlimited shelf life under standard storage conditions for both variants.

Frequently Asked Questions (FAQ)

Q: Can 163086-2 be used as a direct replacement for 163085-2?

A: Yes. The 163086-2 is electrically and mechanically equivalent to the 163085-2. Both parts are identical in contact type, termination method, wire gauge rating, material composition, finish specification, and compliance certifications. The only difference is packaging format.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging supplies components on a continuous carrier tape wound on a reel, designed for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in a container, suitable for manual assembly or kit applications. Electrical and mechanical performance is identical between packaging formats.

Q: Are both parts suitable for 20-24 AWG wire applications?

A: Yes. Both 163085-2 and 163086-2 are rated for 20-24 AWG wire gauges and utilize crimp termination for this wire range.

Q: Do both parts have the same gold finish thickness?

A: Yes. Both parts feature 31.5µin (0.80µm) gold contact finish thickness, ensuring identical electrical contact resistance and corrosion protection characteristics.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant with MSL 1 rating. Compliance certifications are identical.

Q: Which part should be selected for automated assembly?

A: The 163085-2 in Tape & Reel packaging is designed for automated assembly processes and is the appropriate selection for high-volume production environments utilizing component placement automation.

Q: Which part should be selected for manual assembly?

A: The 163086-2 in Bulk packaging is suitable for manual assembly operations where individual component handling is performed.