Equivalent & Substitute Parts for Phoenix Contact 1622975

Part Overview

The Phoenix Contact 1622975 is a crimp pin contact designed for circular connector applications. This contact is classified as a power contact with machined construction and gold plating for reliable electrical performance. The part is actively stocked with 705 units available in new original condition. Substitute parts are identified based on matching contact size, termination method, and material specifications to ensure functional compatibility in circular connector assemblies.

Substiute Parts

1622975

Phoenix ContactIn Stock: 7711622975 Datasheet

Current PartRFQ

1605745

Phoenix ContactIn Stock: 9451605745 Datasheet

SimilarRFQ

1607057

Phoenix ContactIn Stock: 10921607057 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Phoenix Contact 1622975 are qualified based on the following critical parameters:

• Contact Size: 3.6mm (matching dimension for connector compatibility)
• Contact Type: Pin contact (functional equivalence in connector assembly)
• Contact Termination: Crimp (identical termination method)
• Contact Material: Copper Zinc Alloy (material compatibility)
• Contact Finish: Gold (electrical performance and corrosion resistance)
• Manufacturer: Phoenix Contact (same manufacturer ensures design consistency)
• Series: SF (product line alignment)
• RoHS Status: RoHS Compliant (regulatory compliance match)

The substitute parts differ in wire gauge range to accommodate different conductor sizes while maintaining the same contact geometry and termination characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain active product status and RoHS compliance, ensuring regulatory alignment with the original part. Selection between 1605745 and 1607057 is determined by wire gauge requirements:

• 1605745 accommodates 10-12 AWG (4.0 ~ 6.0mm²) conductor sizes for higher current applications
• 1607057 accommodates 14-18 AWG (1.0 ~ 2.5mm²) conductor sizes for lower current applications

All three parts share identical contact geometry (3.6mm), termination method (crimp), material composition (Copper Zinc Alloy), and surface finish (gold), ensuring mechanical and electrical compatibility within the circular connector assembly.

Frequently Asked Questions (FAQ)

Q: What determines compatibility between the main part and substitute parts?

A: Compatibility is established through matching contact size (3.6mm), contact type (pin), termination method (crimp), material (Copper Zinc Alloy), and finish (gold). These parameters ensure the substitute contacts function identically within the connector assembly.

Q: How do wire gauge ranges affect part selection?

A: Wire gauge range specifies the conductor cross-section the contact accommodates. Part 1605745 is rated for 10-12 AWG (4.0 ~ 6.0mm²) for higher current circuits, while 1607057 is rated for 14-18 AWG (1.0 ~ 2.5mm²) for lower current circuits. Selection depends on the actual wire gauge in your application.

Q: Are all parts RoHS compliant?

A: Yes, both substitute parts (1605745 and 1607057) are RoHS Compliant, matching the regulatory requirements of the original part.

Q: What is the packaging format for substitute parts?

A: Both substitute parts are supplied in Bulk packaging format.

Q: Are substitute parts actively manufactured?

A: Yes, both substitute parts maintain Active product status, ensuring continued availability and support from Phoenix Contact.