Phoenix Contact 1620447 Circular Connector Receptacle Housing - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1620447 is a 6-position (5 + PE) circular connector receptacle housing designed for panel mount, right-angle applications with a rotatable backshell. This connector features a metal shell with IP67 ingress protection and operates across a temperature range of -40°C to 125°C. The part is classified as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations.

Substiute Parts

1620447

Phoenix ContactIn Stock: 9361620447 Datasheet

Current PartRFQ

1628514

Phoenix ContactIn Stock: 11911628514 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact 1620447 is determined by the following critical parameters that must remain consistent:

• Connector Type & Configuration: Receptacle housing for female sockets, 6-position (5 + PE) arrangement
• Shell Size: M17-6 insert size maintains mechanical and electrical compatibility
• Mounting Interface: Panel mount with right-angle orientation and flange mounting feature
• Ingress Protection: IP67 minimum rating for environmental sealing
• Operating Temperature Range: Minimum -40°C to 105°C overlap required
• Contact Termination: Crimp-type contacts for consistent mating performance
• Compliance: ROHS3 and REACH compliance maintained

The Phoenix Contact 1628514 qualifies as a direct substitute based on these parameters. Both connectors share identical shell size (M17-6), position count (6), mounting configuration (panel mount, right angle), and environmental protection rating (IP67/IP68). The 1628514 represents an active product from the PRO series, providing continuity for applications previously using the obsolete 1620447.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1628514 serves as the active product replacement for the obsolete 1620447. Selection of the 1628514 is supported by:

• Product Status Alignment: The 1628514 is an active product within Phoenix Contact's PRO series, ensuring ongoing availability and supply chain continuity
• Mechanical Compatibility: Identical shell size (M17-6), position configuration (6-position), and panel mount right-angle design ensure direct mechanical fit
• Environmental Protection: The 1628514 provides IP67/IP68 ingress protection, meeting or exceeding the IP67 requirement of the original part
• Compliance Maintenance: Both parts maintain EAR99 ECCN classification and REACH compliance status
• Operating Temperature Consideration: The 1628514 operates to 105°C maximum, which covers the majority of industrial applications within the -40°C to 105°C overlap range. Applications requiring operation above 105°C may require alternative evaluation

The primary design difference is the fastening mechanism: the 1620447 uses push-twist fastening while the 1628514 employs threaded fastening. This difference does not affect electrical or mechanical compatibility but may require procedural adjustment in mating operations.

Frequently Asked Questions (FAQ)

Q: Can the 1628514 directly replace the 1620447 in existing installations?

A: Yes, the 1628514 provides direct mechanical and electrical replacement. Both connectors share the M17-6 shell size, 6-position configuration, panel mount right-angle design, and IP67 environmental protection. The fastening mechanism differs (push-twist versus threaded), which affects mating procedure but not compatibility.

Q: What is the significance of the fastening type difference?

A: The 1620447 uses push-twist fastening while the 1628514 uses threaded fastening. Both methods provide secure mating connections. The threaded approach in the 1628514 may offer enhanced retention in high-vibration environments. Mating procedures will differ between the two designs.

Q: Does the operating temperature difference affect substitution?

A: The 1620447 operates to 125°C while the 1628514 operates to 105°C. For applications operating within the -40°C to 105°C range, the 1628514 is fully suitable. Applications requiring sustained operation above 105°C should evaluate alternative solutions.

Q: What is the difference between shielded and unshielded configurations?

A: The 1620447 is shielded while the 1628514 is unshielded. Shielding provides electromagnetic interference (EMI) protection. Applications requiring EMI suppression should evaluate whether the unshielded 1628514 meets performance requirements or if alternative shielded options are necessary.

Q: Are there packaging differences between these parts?

A: The 1620447 packaging is not specified in available documentation. The 1628514 is supplied in bulk packaging. Confirm packaging requirements with your procurement process.

Q: What compliance certifications apply to both parts?

A: Both parts maintain EAR99 ECCN classification and REACH compliance status. The 1620447 is explicitly ROHS3 compliant. RoHS compliance status for the 1628514 should be confirmed with the manufacturer.