Phoenix Contact 1619613 Circular Connector Plug Housing - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1619613 is a 17-position circular connector plug housing designed for male pins with free hanging (in-line) mounting configuration. This component features a shielded M23-17 shell size with threaded fastening, backshell, and coupling nut assembly. The part carries Last Time Buy status, indicating discontinued production. Identification of equivalent substitute parts is necessary to ensure continued availability and supply chain continuity for applications requiring this connector specification.

Substiute Parts

1619613

Phoenix ContactIn Stock: 8601619613 Datasheet

Current PartRFQ

1629202

Phoenix ContactIn Stock: 10591629202 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1619613 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector type: Plug housing for male pins
• Number of positions: 17
• Shell size: M23-17
• Contact type: Crimp
• Contact size: 1.0mm
• Mounting configuration: Free hanging (in-line)
• Fastening mechanism: Threaded
• Shell material: Gadolinium-zinc
• Shielding: Shielded
• Insert material: Polyamide (PA66), Nylon 6/6
• Manufacturer: Phoenix Contact

The substitute part 1629202 meets all mandatory matching parameters and is therefore classified as a direct equivalent. Both parts are manufactured by Phoenix Contact and maintain identical mechanical and electrical interface specifications.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1629202 is a direct substitute for the 1619613 based on mechanical and electrical interface equivalence. The 1629202 is manufactured by Phoenix Contact and maintains active production status, providing supply chain continuity for applications currently using the 1619613.

Key Considerations:

The 1629202 provides enhanced ingress protection (IP66/IP68/IP69K) compared to the 1619613 (IP67), making it suitable for applications requiring equal or greater environmental sealing.

The 1629202 specifies a reduced maximum operating temperature of 105°C compared to the 1619613 at 125°C. Applications operating continuously above 105°C require evaluation against actual thermal requirements.

Both parts are RoHS compliant based on available documentation for the 1619613. Compliance verification for the 1629202 should be obtained from Phoenix Contact if required for regulatory documentation.

Frequently Asked Questions (FAQ)

Q: Can the 1629202 be used as a direct replacement for the 1619613?

A: Yes. Both parts share identical mechanical interfaces, pin configurations, shell sizes, and contact specifications. The 1629202 is manufactured by Phoenix Contact and is classified as a direct equivalent.

Q: What are the differences between these two parts?

A: The parts differ in series designation (CA versus PRO), product status (Last Time Buy versus Active), ingress protection rating (IP67 versus IP66/IP68/IP69K), and maximum operating temperature (125°C versus 105°C).

Q: Does the higher ingress protection rating of the 1629202 affect compatibility?

A: No. Enhanced ingress protection is a superset of the original specification and does not compromise compatibility. Applications requiring IP67 protection will continue to meet requirements with the 1629202.

Q: Are there temperature limitations when substituting the 1629202 for the 1619613?

A: The 1629202 specifies a maximum operating temperature of 105°C compared to 125°C for the 1619613. Applications operating continuously above 105°C should be evaluated against actual thermal requirements and Phoenix Contact technical documentation.

Q: What is the packaging configuration for both parts?

A: Both the 1619613 and 1629202 are supplied in bulk packaging. Contacts are not included with either part and must be sourced separately.

Q: Are both parts RoHS compliant?

A: The 1619613 is confirmed RoHS compliant. RoHS compliance status for the 1629202 should be verified with Phoenix Contact documentation if required for regulatory or procurement purposes.