160475J63N-F Equivalent & Substitute Parts Reference

Part Overview

The 160475J63N-F is a 4.7 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE) in the 160 series. This through-hole radial capacitor operates at 63V DC with polyester metallized dielectric construction. The part is Active status with 661 units in current inventory stock.

Film capacitors in this specification range are used in general-purpose applications requiring stable capacitance, low ESR, and reliable performance across industrial temperature ranges. Equivalent substitutes are identified based on matching electrical ratings, dielectric material compatibility, and physical form factor constraints.

Substiute Parts

160475J63N-F

Cornell Dubilier Electronics (CDE)In Stock: 728160475J63N-F Datasheet

Current PartRFQ

B32522C0475J000

EPCOS - TDK ElectronicsIn Stock: 16632B32522C0475J000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 160475J63N-F is determined by the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value: 4.7 µF (exact match required)
• Tolerance: ±5% (matching tolerance band)
• Voltage rating: 63V DC minimum (equal or higher acceptable)
• Dielectric type: Polyester metallized (material family match)

Physical Compatibility Requirements:

• Mounting type: Through hole radial configuration
• Lead spacing: 0.886" (22.50mm) nominal (PCB layout constraint)
• Package case: Radial form factor

Compliance Requirements:

• RoHS3 compliance status
• Active product status

The substitute part B32522C0475J000 meets all electrical equivalence criteria with identical capacitance, tolerance, and voltage ratings. Physical dimensions differ within acceptable substitution parameters for general-purpose applications where board space permits compact form factors.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (160475J63N-F): Select the original CDE 160475J63N-F when PCB layout requires 0.886" (22.50mm) lead spacing and existing designs are qualified to this specific form factor. This part maintains Active status with established supply availability.

Substitute Selection (B32522C0475J000): The EPCOS B32522C0475J000 serves as an electrical and functional equivalent with identical capacitance, tolerance, and voltage specifications. This substitute is suitable when:

• PCB layout accommodates reduced 0.591" (15.00mm) lead spacing
• Design does not have physical constraints tied to the larger CDE package dimensions
• Extended operating temperature capability to 125°C provides additional margin
• AEC-Q200 automotive qualification is beneficial for application requirements

Both parts maintain ROHS3 compliance and Active product status, ensuring long-term availability and regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can B32522C0475J000 be used as a direct drop-in replacement for 160475J63N-F?

A: Electrical substitution is valid. Physical substitution depends on PCB layout. The B32522C0475J000 has reduced lead spacing (0.591" vs 0.886") and smaller overall dimensions. Verify PCB hole pattern compatibility before implementation.

Q: Are the dielectric materials compatible?

A: Both use polyester metallized dielectric construction. The B32522C0475J000 specifies polyethylene terephthalate (PET) with stacked configuration, which is within the polyester material family. Electrical performance characteristics remain equivalent for the specified voltage and capacitance ratings.

Q: What is the impact of different operating temperature ranges?

A: The 160475J63N-F operates -55°C to 105°C. The B32522C0475J000 extends to 125°C maximum. For applications within the 160475J63N-F range, both parts perform identically. The substitute provides additional thermal margin if required by application specifications.

Q: Does lead spacing affect circuit performance?

A: Lead spacing affects PCB layout and mechanical fit only. Electrical performance is independent of lead spacing. Verify that the 0.591" spacing of the substitute accommodates your PCB hole pattern and does not create mechanical interference with adjacent components.

Q: Are both parts suitable for automotive applications?

A: The 160475J63N-F is specified for general-purpose applications. The B32522C0475J000 carries AEC-Q200 automotive qualification. For automotive designs, the substitute provides additional qualification documentation.

Q: What is the inventory impact of substitution?

A: The 160475J63N-F has 661 units in stock. The B32522C0475J000 has 16,591 units available, providing significantly higher supply availability if substitution is implemented.