160474J63D-F Equivalent & Substitute Parts Reference

Part Overview

The 160474J63D-F is a 0.47 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE), featuring polyester metallized dielectric, rated for 63VDC (40VAC), with ±5% tolerance and radial through-hole mounting. This component is classified as Obsolete, necessitating the identification of substitute parts for new designs, production continuity, and repair applications.

Key Parameters

Parameter	Value
Capacitance	0.47 µF
Tolerance	±5%
Voltage Rating - DC	63V
Voltage Rating - AC	40V
Dielectric Material	Polyester, Metallized
Operating Temperature	-55°C ~ 105°C
Mounting Type	Through Hole
Package / Case	Radial
Lead Spacing	0.394" (10.00mm)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitute parts are categorized based on electrical compatibility and mechanical interchangeability. The primary substitution criteria are:

Capacitance: 0.47 µF (exact match required)
Tolerance: ±5% (exact match)
Voltage Rating - DC: 63V minimum (higher ratings acceptable as upgrades)
Dielectric Material: Polyester metallized or equivalent (PET metallized)
Mounting Type: Through Hole, Radial configuration
Lead Spacing: 0.394" (10.00mm) or 0.295" (7.50mm) or 0.197" (5.00mm)
Operating Temperature: -55°C minimum to 105°C minimum upper limit

Substitutes are classified as:

Direct: Same voltage rating (63VDC), similar or smaller physical dimensions
Similar: Same voltage rating (63VDC), different lead spacing or physical dimensions
Upgrade: Higher voltage rating (100VDC or 250VDC), meeting or exceeding other specifications

Parameter Comparison

Part Number	Manufacturer	Type	Capacitance	Tolerance	Voltage DC	Voltage AC	Dielectric	Operating Temp	Lead Spacing	Size (L×W)	Height Max	Status	Packaging
160474J63D-F	CDE	Original	0.47 µF	±5%	63V	40V	Polyester, Metallized	-55°C ~ 105°C	0.394" (10.00mm)	0.512" × 0.197" (13.00mm × 5.00mm)	0.433" (11.00mm)	Obsolete	-
160474J100E-F	CDE	Direct	0.47 µF	±5%	100V	63V	Polyester, Metallized	-55°C ~ 105°C	0.394" (10.00mm)	0.512" × 0.236" (13.00mm × 6.00mm)	0.472" (12.00mm)	Active	Bulk
167474J63B-F	CDE	Similar	0.47 µF	±5%	63V	40V	Polyester, Metallized	-55°C ~ 125°C	0.295" (7.50mm)	0.413" × 0.157" (10.50mm × 4.00mm)	0.354" (9.00mm)	Active	Bulk
168474J63H-F	CDE	Similar	0.47 µF	±5%	63V	40V	Polyester, Metallized	-55°C ~ 125°C	0.197" (5.00mm)	0.283" × 0.138" (7.20mm × 3.50mm)	0.295" (7.50mm)	Active	Bulk
184474J63RBA-F	CDE	Similar	0.47 µF	±5%	63V	40V	Polyester, Metallized	-55°C ~ 125°C	0.295" (7.50mm)	0.413" × 0.157" (10.50mm × 4.00mm)	0.354" (9.00mm)	Active	Tape & Reel (TR)
184474J63RBB-F	CDE	Similar	0.47 µF	±5%	63V	40V	Polyester, Metallized	-55°C ~ 125°C	0.295" (7.50mm)	0.413" × 0.157" (10.50mm × 4.00mm)	0.354" (9.00mm)	Active	Tape & Reel (TR)
185474J63RHA-F	CDE	Similar	0.47 µF	±5%	63V	40V	Polyester, Metallized	-55°C ~ 125°C	0.197" (5.00mm)	0.283" × 0.138" (7.20mm × 3.50mm)	0.295" (7.50mm)	Active	Tape & Reel (TR)
185474J63RHB-F	CDE	Similar	0.47 µF	±5%	63V	40V	Polyester, Metallized	-55°C ~ 125°C	0.197" (5.00mm)	0.283" × 0.138" (7.20mm × 3.50mm)	0.295" (7.50mm)	Active	Tape & Reel (TR)
B32521C0474J000	EPCOS - TDK	Direct	0.47 µF	±5%	63V	40V	PET, Metallized - Stacked	-55°C ~ 125°C	0.394" (10.00mm)	0.512" × 0.157" (13.00mm × 4.00mm)	0.276" (7.00mm)	Active	Bulk
B32521C1474J000	EPCOS - TDK	Upgrade	0.47 µF	±5%	100V	63V	PET, Metallized - Stacked	-55°C ~ 125°C	0.394" (10.00mm)	0.512" × 0.157" (13.00mm × 4.00mm)	0.354" (9.00mm)	Active	Bulk
B32521C3474J000	EPCOS - TDK	Upgrade	0.47 µF	±5%	250V	160V	PET, Metallized - Stacked	-55°C ~ 125°C	0.394" (10.00mm)	0.512" × 0.236" (13.00mm × 6.00mm)	0.472" (12.00mm)	Active	Bulk

Engineering Selection Recommendations

Product Status: All substitute parts listed are Active, providing stable supply chain continuity compared to the Obsolete original part.

Compliance: The original part 160474J63D-F is ROHS3 Compliant. All substitute parts maintain ROHS3 Compliant status. The EPCOS-TDK B3252* series additionally carries AEC-Q200 automotive qualification.

Mechanical Considerations: Lead spacing variations (10.00mm, 7.50mm, 5.00mm) require PCB footprint evaluation. Parts with 0.394" (10.00mm) lead spacing match the original footprint directly. Parts with 0.295" (7.50mm) or 0.197" (5.00mm) lead spacing require PCB modification or adapter use.

Voltage Upgrades: Parts rated for 100VDC or 250VDC provide increased margin in the 63VDC application. Higher voltage ratings correlate with larger physical dimensions in some cases.

Temperature Performance: The original part operates to 105°C. Substitute parts from series 167, 168, 184, 185, and B3252* operate to 125°C, providing enhanced temperature margin.

Packaging Options: Bulk and Tape & Reel packaging options are available across the substitute range for different assembly requirements.

Frequently Asked Questions (FAQ)

What parameters must match exactly for direct substitution?
Capacitance (0.47 µF) and tolerance (±5%) must match exactly. Voltage rating must meet or exceed 63VDC. Lead spacing must match the PCB footprint (0.394" for direct fit).

Can I use a part with higher voltage rating?
Parts rated for 100VDC or 250VDC are electrically compatible and provide additional safety margin. Physical dimensions may differ.

What is the difference between polyester metallized and PET metallized dielectrics?
Polyethylene Terephthalate (PET) is the chemical name for polyester. These terms describe equivalent dielectric materials for this application.

How do I select between different lead spacings?
Lead spacing must match the PCB pad layout. The original part uses 0.394" (10.00mm) spacing. Parts with 0.295" (7.50mm) or 0.197" (5.00mm) spacing require PCB design changes.

Are there package size differences I should consider?
Physical dimensions vary across substitute parts. Height ranges from 0.276" to 0.472", length from 0.283" to 0.512", and width from 0.138" to 0.236". Verify mechanical clearance on the assembly.

What does the AEC-Q200 rating indicate?
AEC-Q200 qualification indicates compliance with automotive component stress test standards. The EPCOS-TDK B3252* series parts carry this certification.

Can Tape & Reel packaging affect electrical performance?
Packaging format (Bulk vs. Tape & Reel) does not affect electrical performance. Selection depends on assembly process requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message