Equivalent & Substitute Parts for 160222K1000C-F

Part Overview

The Cornell Dubilier Electronics (CDE) 160222K1000C-F is a 2200 pF film capacitor rated for 1000V DC (1kV) with polyester metallized dielectric construction. This radial through-hole component is designed for general-purpose applications requiring stable capacitance across a wide operating temperature range of -55°C to 105°C. The part maintains Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to address specific tolerance requirements or inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

160222K1000C-F

Cornell Dubilier Electronics (CDE)In Stock: 939160222K1000C-F Datasheet

Current PartRFQ

160222J1000C-F

Cornell Dubilier Electronics (CDE)In Stock: 4295160222J1000C-F Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 160222K1000C-F is determined by strict equivalence in the following critical parameters:

Fixed Parameters (No Variation Allowed):

• Capacitance: 2200 pF
• Voltage Rating (DC): 1000V (1kV)
• Voltage Rating (AC): 250V
• Dielectric Material: Polyester, Metallized
• Operating Temperature Range: -55°C to 105°C
• Mounting Type: Through Hole
• Package Type: Radial
• Lead Spacing: 0.394" (10.00mm)
• Physical Dimensions: 0.512" L x 0.157" W (13.00mm x 4.00mm)
• Height (Seated Max): 0.374" (9.50mm)
• Termination: PC Pins
• RoHS Status: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)

Variable Parameter (Substitution Basis):

• Tolerance: The 160222K1000C-F operates at ±10% tolerance. The substitute part 160222J1000C-F provides ±5% tolerance, representing a tighter tolerance specification while maintaining all other electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

160222K1000C-F (±10% Tolerance): Select this part for applications where standard tolerance specifications are acceptable. Both the main part and substitute maintain Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating. This part is suitable for general-purpose applications with standard capacitance accuracy requirements.

160222J1000C-F (±5% Tolerance): Select this substitute part when tighter tolerance control is required. The ±5% tolerance specification provides improved capacitance accuracy compared to the ±10% main part, while maintaining identical electrical ratings, operating temperature range, and physical form factor. Both parts are ROHS3 compliant with MSL 1 rating and Active product status. The substitute part offers higher inventory availability (4273 pcs vs. 855 pcs).

Both parts are functionally interchangeable from electrical and mechanical perspectives within their respective tolerance specifications. Selection between them depends solely on the tolerance requirement of the application circuit.

Frequently Asked Questions (FAQ)

Q: Can 160222J1000C-F replace 160222K1000C-F in my circuit?

A: Yes. The 160222J1000C-F is electrically and mechanically equivalent to the 160222K1000C-F. The only difference is the tolerance specification: ±5% versus ±10%. If your circuit design accommodates ±5% tolerance, this substitute is directly compatible.

Q: What is the difference between these two parts?

A: Both parts are 2200 pF film capacitors with identical voltage ratings (1000V DC / 250V AC), dielectric material (polyester metallized), operating temperature range (-55°C to 105°C), and physical dimensions. The 160222J1000C-F provides tighter tolerance (±5%) compared to the 160222K1000C-F (±10%).

Q: Are the physical dimensions identical?

A: Yes. Both parts share identical dimensions: 0.512" L x 0.157" W (13.00mm x 4.00mm) with maximum seated height of 0.374" (9.50mm). Lead spacing is 0.394" (10.00mm) for both parts. They are pin-compatible for through-hole PCB mounting.

Q: Do both parts meet RoHS compliance?

A: Yes. Both 160222K1000C-F and 160222J1000C-F are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level).

Q: Which part should I choose for high-precision applications?

A: The 160222J1000C-F with ±5% tolerance is appropriate for applications requiring tighter capacitance accuracy. The 160222K1000C-F with ±10% tolerance is suitable for general-purpose applications where standard tolerance is acceptable.

Q: Are both parts currently in production?

A: Yes. Both parts maintain Active product status with Cornell Dubilier Electronics (CDE).