Equivalent & Substitute Parts for 160106K100S-F

Part Overview

The 160106K100S-F is a 10 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE) with a 100V DC voltage rating, polyester metallized dielectric, and radial through-hole mounting. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Film capacitors of this specification are used in general-purpose applications requiring stable capacitance and low ESR characteristics across extended temperature ranges. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable.

Substiute Parts

160106K100S-F

Cornell Dubilier Electronics (CDE)In Stock: 767160106K100S-F Datasheet

Current PartRFQ

DME2W10K-F

Cornell Dubilier Electronics (CDE)In Stock: 817DME2W10K-F Datasheet

UpgradeRFQ

DME1W10K-F

Cornell Dubilier Electronics (CDE)In Stock: 2413DME1W10K-F Datasheet

SimilarRFQ

B32524Q3106K

EPCOS - TDK ElectronicsIn Stock: 1100B32524Q3106K Datasheet

UpgradeRFQ

B32523Q1106K000

EPCOS - TDK ElectronicsIn Stock: 10913B32523Q1106K000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the 160106K100S-F is based on the following criteria:

Electrical Parameters (Non-Negotiable):

• Capacitance value must be 10 µF
• Tolerance must be ±10% or tighter
• DC voltage rating must be ≥100V
• AC voltage rating must be ≥63V
• Dielectric material must be polyester metallized

Mechanical Parameters (Application-Dependent):

• Mounting type must be through-hole radial
• Lead spacing must be 1.083" (27.50mm) for direct PCB footprint compatibility
• Physical dimensions may vary if PCB layout permits

Environmental & Compliance (Mandatory):

• Operating temperature range must cover -55°C to 105°C or extend beyond
• RoHS3 compliance required
• REACH unaffected status required

Substitute Categories:

Upgrade Substitutes (Higher voltage rating, improved temperature range):

• DME2W10K-F: 250V DC rating, -55°C to 125°C operating range
• B32524Q3106K: 250V DC rating, -55°C to 125°C operating range

Similar Substitutes (Equivalent voltage rating, improved temperature range, compact size):

• DME1W10K-F: 100V DC rating, -55°C to 125°C operating range, smaller footprint
• B32523Q1106K000: 100V DC rating, -55°C to 125°C operating range, compact footprint

Parameter Comparison

Engineering Selection Recommendations

Direct Footprint Replacement (Lead Spacing 1.083" / 27.50mm):

DME2W10K-F and B32524Q3106K are direct footprint replacements with identical lead spacing to the 160106K100S-F. Both parts provide upgraded voltage ratings (250V DC) and extended operating temperature ranges (-55°C to 125°C). Selection between these two depends on manufacturer preference and supply chain considerations. Both maintain ROHS3 compliance and REACH unaffected status.

Compact Footprint Substitutes (Lead Spacing 0.886" / 22.50mm):

DME1W10K-F and B32523Q1106K000 require PCB layout modification due to reduced lead spacing. These parts maintain the 100V DC voltage rating and provide extended operating temperature ranges (-55°C to 125°C). Compact dimensions reduce board space requirements. Both maintain ROHS3 compliance and REACH unaffected status. PCB redesign is necessary for implementation.

Selection Criteria:

• If PCB footprint is fixed and cannot be modified: Select DME2W10K-F or B32524Q3106K
• If PCB layout permits redesign and space reduction is beneficial: Select DME1W10K-F or B32523Q1106K000
• If higher voltage margin is required for circuit protection: Select upgrade parts (250V DC rating)
• If equivalent voltage rating is sufficient: Select similar parts (100V DC rating)

All substitute parts are Active status with full compliance certifications matching the original part.

Frequently Asked Questions (FAQ)

Q: Can DME1W10K-F or B32523Q1106K000 be used as direct replacements without PCB modification?

A: No. These parts have lead spacing of 0.886" (22.50mm) compared to the original 1.083" (27.50mm). Direct insertion into the existing PCB footprint will result in mechanical misalignment. PCB redesign is required.

Q: What is the advantage of selecting upgrade parts with 250V DC rating?

A: Upgrade parts (DME2W10K-F and B32524Q3106K) provide higher voltage margin above the circuit operating voltage, which can extend component life and improve reliability in applications with voltage transients or ripple. They also offer extended operating temperature range to 125°C.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and REACH unaffected status, matching the environmental and regulatory requirements of the original 160106K100S-F.

Q: What is the difference between CDE and EPCOS-TDK substitute parts?

A: Both manufacturers provide equivalent electrical performance and compliance certifications. CDE parts (DME series) and EPCOS-TDK parts (B3252* series) differ in dielectric material specification (CDE specifies polyester metallized; EPCOS-TDK specifies polyester PET metallized) and physical dimensions. Selection depends on manufacturer availability and supply chain preference.

Q: Can compact parts (DME1W10K-F, B32523Q1106K000) be used in applications requiring the original lead spacing?

A: No. Lead spacing is a critical mechanical parameter determined by PCB footprint design. Compact parts with 0.886" (22.50mm) spacing cannot be installed in PCB holes designed for 1.083" (27.50mm) spacing without modification.

Q: What is the operating temperature advantage of substitute parts?

A: The original 160106K100S-F operates from -55°C to 105°C. All substitute parts extend the upper temperature limit to 125°C, providing 20°C additional margin for high-temperature applications.

Q: Are there inventory considerations for part selection?

A: Yes. Current inventory levels are: 160106K100S-F (698 pcs), DME2W10K-F (801 pcs), DME1W10K-F (2366 pcs), B32524Q3106K (1008 pcs), B32523Q1106K000 (10875 pcs). Availability may influence procurement decisions.