15KP60A-TP Equivalent & Substitute Parts

Part Overview

The 15KP60A-TP is an active, through-hole mounted transient voltage suppressor (TVS) diode manufactured by Micro Commercial Co. This unidirectional Zener-type device provides transient protection with a 60V reverse standoff voltage and 97.3V maximum clamping voltage at peak pulse current. The part operates across -55°C to 175°C and delivers 15kW peak pulse power dissipation. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, manufacturing discontinuation, or application-specific requirements.

Substiute Parts

15KP60A-TP

Micro Commercial CoIn Stock: 121415KP60A-TP Datasheet

Current PartRFQ

15KPA60A

MDE Semiconductor IncIn Stock: 148315KPA60A Datasheet

SimilarRFQ

30KPA60A

MDE Semiconductor IncIn Stock: 206030KPA60A Datasheet

SimilarRFQ

5KP60A

Diotec SemiconductorIn Stock: 41785KP60A Datasheet

SimilarRFQ

5KP60A-E3/54

Vishay General Semiconductor - Diodes DivisionIn Stock: 82915KP60A-E3/54 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 15KP60A-TP is determined by the following criteria:

Primary Matching Parameters:

• Voltage - Reverse Standoff: 60V (exact match required)
• Voltage - Breakdown (Min): 66.7V minimum
• Voltage - Clamping (Max) @ Ipp: 97V to 102V range acceptable
• Unidirectional Channels: 1 (single channel only)
• Type: Zener
• Mounting Type: Through Hole
• Operating Temperature: -55°C to 175°C minimum coverage

Secondary Considerations:

• Power - Peak Pulse: 5kW to 30kW range (15kW primary specification)
• Package / Case: R-6 or P600 axial packages
• RoHS Status: ROHS3 Compliant

All identified substitute parts meet the primary matching parameters. Variations in peak pulse power rating and package designation reflect different performance tiers within the same functional class.

Parameter Comparison

Engineering Selection Recommendations

15KPA60A (MDE Semiconductor Inc): Direct functional equivalent with identical 15kW power rating and 97.4V clamping voltage. Meets all primary matching parameters. ROHS3 compliant. Suitable for direct substitution where P600 package compatibility is acceptable.

30KPA60A (MDE Semiconductor Inc): Higher power tier (30kW) with 102V clamping voltage. Maintains 60V standoff and 67V breakdown specifications. ROHS3 compliant. Applicable where increased transient energy absorption is required or as a conservative design choice.

5KP60A (Diotec Semiconductor): Lower power tier (5kW) with 96.8V clamping voltage. Meets voltage specifications and temperature range (-50°C to 175°C). ROHS3 compliant. Suitable for applications with reduced transient energy requirements. Operating temperature minimum is -50°C versus -55°C.

5KP60A-E3/54 (Vishay General Semiconductor - Diodes Division): Lower power tier (5kW) with 97V clamping voltage. TransZorb® series designation. Meets all voltage and temperature specifications. ROHS3 compliant. Suitable for applications with reduced transient energy requirements.

All substitute parts maintain active product status and full regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can 5KP60A or 5KP60A-E3/54 replace 15KP60A-TP in all applications?

A: These 5kW parts are functionally compatible only in applications where peak transient energy does not exceed 5000W. The voltage specifications (60V standoff, 97V clamping) are equivalent, but power dissipation capacity is reduced by 66%. Verify application transient energy requirements before substitution.

Q: What is the difference between R-6 and P600 package designations?

A: Both are through-hole axial packages for TVS diodes. R-6 and P600 are different supplier package designations for mechanically similar form factors. Physical dimensions and lead spacing may vary slightly. Verify PCB footprint compatibility before substitution.

Q: Is 30KPA60A suitable as a substitute for 15KP60A-TP?

A: Yes. The 30KPA60A exceeds the 15kW power specification (30kW rating) while maintaining identical 60V standoff voltage and comparable clamping voltage (102V versus 97.3V). This represents a conservative design choice with higher transient protection margin.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitute parts carry ROHS3 Compliant certification, matching the main part specification.

Q: Does the 5KP60A operating temperature minimum of -50°C affect substitution?

A: The 5KP60A minimum operating temperature is -50°C versus -55°C for the main part. Substitution is valid only if the application does not require operation below -50°C.

Q: What inventory status should influence part selection?

A: All parts listed are in active stock. Selection should prioritize application requirements (power rating, package compatibility, temperature range) over inventory quantity.