Phoenix Contact 1582214 Circular Connector Distributor - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1582214 is a 4-position circular connector distributor with IDC termination, designed for applications requiring IP66/IP68/IP69K ingress protection. This component features silver-plated copper contacts, polyamide shell construction, and a 20A current rating. The part is classified as obsolete, making identification of suitable substitutes essential for ongoing system maintenance and new design implementations.

Substiute Parts

1582214

Phoenix ContactIn Stock: 10871582214 Datasheet

Current PartRFQ

1423990

Phoenix ContactIn Stock: 11071423990 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1582214 is determined by strict alignment of the following critical parameters:

• Connector Type & Position Configuration: Must be a 4-position distributor with 3 + PE arrangement
• Termination Method: IDC termination required
• Contact System: Silver-plated copper contacts
• Current Rating: 20A minimum
• Ingress Protection: IP66/IP68/IP69K classification
• Operating Temperature Range: -40°C ~ 100°C
• Mounting Configuration: Free hanging, in-line orientation with threaded fastening
• Cable Opening Compatibility: 0.354" ~ 0.551" (9.00mm ~ 14.00mm)
• Compliance Standards: UL94 V-0 flammability rating, RoHS compliance

The substitute part Phoenix Contact 1582214 meets all critical substitution criteria within the QPD series, maintaining functional and electrical equivalence.

Parameter Comparison

Engineering Selection Recommendations

Phoenix Contact 1582214 is classified as obsolete. The substitute part 1423990 is the equivalent component currently in active production status within the QPD series.

Selection Basis:

• Compliance Alignment: Part 1423990 maintains RoHS3 compliance, exceeding the RoHS compliance requirement of the original part
• Functional Equivalence: All critical electrical and mechanical parameters are identical
• Production Status: Part 1423990 is actively manufactured, ensuring long-term availability and supply chain continuity
• Series Continuity: Both parts belong to the Phoenix Contact QPD series, maintaining design and interface consistency

For applications currently using 1582214, direct substitution with 1423990 is supported by identical parameter specifications across all functional categories.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1582214 be directly replaced with 1423990?

A: Yes. Both parts are 4-position circular connector distributors within the QPD series with identical electrical ratings (20A), contact configuration (3 + PE), termination method (IDC), ingress protection (IP66/IP68/IP69K), and operating temperature range (-40°C ~ 100°C). All mechanical interfaces and cable opening specifications are identical.

Q: What is the difference between RoHS and ROHS3 compliance?

A: ROHS3 represents an updated compliance designation that maintains all RoHS requirements. Part 1423990 meets the more current ROHS3 standard, which is compatible with applications requiring RoHS compliance.

Q: Are there packaging differences between these parts?

A: The main part 1582214 is listed with unspecified packaging, while 1423990 is supplied in bulk packaging. Both parts are functionally identical; packaging differences do not affect electrical or mechanical performance.

Q: What is the significance of the orientation parameter difference?

A: Part 1582214 does not specify orientation, while 1423990 is designated as keyed. Both parts maintain the same free-hanging, in-line mounting configuration with threaded fastening. The keyed designation on 1423990 provides additional mechanical alignment assurance.

Q: Is the shielding difference between parts significant?

A: Part 1582214 does not specify shielding status, while 1423990 is designated as unshielded. For applications requiring shielded connectors, neither part is suitable. For standard unshielded applications, both parts are equivalent.

Q: What cable sizes are compatible with these connectors?

A: Both parts accommodate cable openings from 0.354" to 0.551" (9.00mm to 14.00mm), supporting standard industrial cable diameters within this range.