TE Connectivity AMP Connectors 1-532428-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-532428-5 is a 200-position high-density backplane connector receptacle with female sockets designed for through-hole, right-angle PCB mounting. This connector operates within the HDI (High Density Interconnect) series and features gold-plated contacts with solder termination. The part is currently active in production with 853 units in stock. Substitute parts are identified to address inventory availability, compliance requirements, or manufacturing continuity needs while maintaining electrical and mechanical compatibility.

Substiute Parts

1-532428-5

TE Connectivity AMP ConnectorsIn Stock: 9341-532428-5 Datasheet

Current PartRFQ

1-5532428-5

TE Connectivity AMP ConnectorsIn Stock: 9601-5532428-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 1-5532428-5 is classified as a direct equivalent based on the following critical parameters that determine substitution validity:

Electrical Compatibility Parameters:

• Connector type: Receptacle, Female Sockets (identical)
• Number of positions: 200 (identical)
• Pitch: 0.100" (2.54mm) (identical)
• Contact finish: Gold at 30.0µin (0.76µm) (identical)
• Operating temperature range: -65°C ~ 125°C (identical)
• Material flammability rating: UL94 V-0 (identical)
• Moisture sensitivity level: 1 (Unlimited) (identical)

Mechanical Compatibility Parameters:

• Connector style: High Density (HDC, HDI, HPC) (identical)
• Number of rows: 2 (identical)
• Mounting type: Through Hole, Right Angle (identical)
• Termination: Solder (identical)
• Features: Mating Guide (identical)

Compliance Difference:

• Main part 1-532428-5: RoHS non-compliant
• Substitute part 1-5532428-5: RoHS3 compliant

The substitute part maintains full electrical and mechanical compatibility while offering improved regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

Part 1-532428-5 (Original):

• Select when RoHS non-compliant designs are acceptable or required by legacy system specifications
• Active product status ensures continued availability and manufacturing support
• Suitable for applications where regulatory compliance is not a constraint

Part 1-5532428-5 (Substitute):

• Select for new designs or systems requiring RoHS3 compliance
• Provides identical electrical and mechanical performance to the original part
• Higher inventory availability (949 units versus 853 units) supports production scheduling
• Active product status confirms ongoing manufacturer support
• Recommended for applications subject to environmental or regulatory compliance mandates

Both parts are manufactured by TE Connectivity AMP Connectors and maintain UL94 V-0 flammability certification. Selection between these parts depends on compliance requirements rather than functional performance, as all critical electrical and mechanical parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can 1-5532428-5 be used as a direct replacement for 1-532428-5 in existing designs?

A: Yes. The substitute part 1-5532428-5 maintains identical electrical and mechanical specifications including connector type, position count, pitch, mounting configuration, contact finish, and operating temperature range. Both parts are receptacle-type, 200-position, high-density connectors with through-hole, right-angle solder termination and gold-plated contacts.

Q: What is the primary difference between these two parts?

A: The primary difference is regulatory compliance status. Part 1-532428-5 is RoHS non-compliant, while part 1-5532428-5 is RoHS3 compliant. All other electrical and mechanical parameters are identical.

Q: Are the physical dimensions and PCB footprints identical?

A: Yes. Both parts share identical mounting type (through-hole, right-angle), pitch (0.100" / 2.54mm), number of rows (2), and connector style (high-density). PCB footprints are interchangeable.

Q: Do both parts support the same current rating?

A: Part 1-532428-5 specifies a 3A current rating. Part 1-5532428-5 does not specify a current rating in the provided data. For applications requiring confirmed current specifications, refer to the manufacturer's detailed technical documentation.

Q: Which part should be selected for new product designs?

A: Part 1-5532428-5 is recommended for new designs due to RoHS3 compliance, which aligns with current environmental and regulatory standards. Both parts are active products with manufacturer support.

Q: Are the contact finish specifications identical?

A: Yes. Both parts feature gold contact finish at 30.0µin (0.76µm) thickness, ensuring equivalent electrical performance and corrosion resistance.

Q: What is the operating temperature range for both connectors?

A: Both parts operate across the identical temperature range of -65°C to 125°C, supporting applications in extreme thermal environments.

Q: Are both parts available in the same packaging format?

A: Yes. Both parts are supplied in tube packaging, maintaining consistent handling and storage requirements.