TE Connectivity AMP Connectors 1-520459-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-520459-1 is a modular jack connector with 4 positions, 90° right-angle orientation, and shielded design. This component is classified as obsolete, which necessitates identification of equivalent substitute parts for ongoing procurement and system maintenance. The part features through-hole solder termination, phosphor bronze contacts with gold finish, and polyester housing suitable for operating temperatures between -20°C and 80°C.

Key Parameters

Parameter	Value
Connector Type	SDL, Jack
Number of Positions/Contacts	4 Positions
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Shielding	Shielded
Contact Material	Phosphor Bronze
Contact Finish	Gold, 50.0µin (1.27µm)
Housing Material	Polyester
Operating Temperature Range	-20°C ~ 80°C
Features	Board Guide, Keyed
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the obsolete 1-520459-1 is based on electrical and mechanical parameter equivalence. The substitute part 1-1761185-1 maintains identical specifications across all critical functional parameters: connector type (SDL, Jack), position count (4 positions), mounting configuration (through hole), orientation (90° right angle), termination method (solder), shielding design (shielded), contact material and finish (phosphor bronze with 50.0µin gold plating), housing material (polyester), and operating temperature range (-20°C ~ 80°C).

The key parameters determining substitution eligibility are:

Connector Type: SDL, Jack
Number of Positions: 4
Mounting Type: Through Hole
Orientation: 90° Angle (Right)
Termination: Solder
Shielding: Shielded
Contact Material: Phosphor Bronze
Contact Finish: Gold at 50.0µin thickness
Housing Material: Polyester
Operating Temperature: -20°C ~ 80°C
Features: Board Guide, Keyed

Parameter Comparison

Parameter	1-520459-1 (Main Part)	1-1761185-1 (Substitute)
Manufacturer	TE Connectivity AMP Connectors	TE Connectivity AMP Connectors
Category	Modular Connectors	Modular Connectors
Connector Type	SDL, Jack	SDL, Jack
Number of Positions/Contacts	4 Positions	4 Positions
Number of Ports	1	1
Number of Rows	1	1
Mounting Type	Through Hole	Through Hole
Orientation	90° Angle (Right)	90° Angle (Right)
Termination	Solder	Solder
Shielding	Shielded	Shielded
Features	Board Guide, Keyed	Board Guide, Keyed
LED Color	Does Not Contain LED	Does Not Contain LED
Contact Material	Phosphor Bronze	Phosphor Bronze
Contact Finish	Gold	Gold
Contact Finish Thickness	50.0µin (1.27µm)	50.0µin (1.27µm)
Housing Material	Polyester	Polyester
Operating Temperature	-20°C ~ 80°C	-20°C ~ 80°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
ECCN	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040
Product Status	Obsolete	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant

Engineering Selection Recommendations

The substitute part 1-1761185-1 is the direct equivalent for the obsolete 1-520459-1. Both parts are manufactured by TE Connectivity AMP Connectors and share identical electrical and mechanical specifications across all functional parameters.

The primary distinction between the two parts is product status and regulatory compliance. The 1-520459-1 is classified as obsolete and carries RoHS non-compliant status. The 1-1761185-1 is an active product with ROHS3 compliance certification, making it suitable for applications requiring current regulatory adherence.

For new designs and ongoing procurement, the 1-1761185-1 is the appropriate selection. For legacy system maintenance where the original part specification must be preserved, the 1-1761185-1 provides full functional and mechanical compatibility while offering improved regulatory standing and active manufacturer support.

Frequently Asked Questions (FAQ)

Q: Are the 1-520459-1 and 1-1761185-1 mechanically interchangeable?

A: Yes. Both parts feature identical mounting type (through hole), orientation (90° right angle), connector geometry, and board guide/keyed features. Direct mechanical substitution is supported.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts share identical contact material (phosphor bronze), contact finish (gold at 50.0µin thickness), shielding design, and operating temperature range (-20°C ~ 80°C). Electrical performance is equivalent.

Q: What is the primary reason to transition from 1-520459-1 to 1-1761185-1?

A: The 1-520459-1 is obsolete with no active manufacturer support. The 1-1761185-1 is an active product with ROHS3 compliance, ensuring long-term availability and regulatory alignment.

Q: Does packaging differ between these parts?

A: The 1-520459-1 packaging is not specified in available documentation. The 1-1761185-1 is supplied in tray packaging. Verify packaging requirements for your procurement process.

Q: Can the 1-1761185-1 be used in applications originally designed for the 1-520459-1?

A: Yes. The 1-1761185-1 maintains full compatibility with all functional, electrical, and mechanical parameters of the 1-520459-1. Direct substitution is supported without design modification.

Q: What is the inventory status for these parts?

A: The 1-520459-1 has 676 pieces in stock. The 1-1761185-1 has 2465 pieces in stock, providing greater availability for procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message