3M 15-10S-W Ring Terminal Connector Equivalent & Substitute Parts

Part Overview

The 3M 15-10S-W is an active, non-insulated ring terminal connector designed for 6 AWG wire gauge applications with a #10 stud connection. This circular terminal features a brazed seam construction and tin-plated copper contact material. The part is ROHS3 compliant and classified as Moisture Sensitivity Level 1 (unlimited). Equivalent substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative suppliers.

Substiute Parts

15-10S-W

3MIn Stock: 80215-10S-W Datasheet

Current PartRFQ

P6-10R-E

Panduit CorpIn Stock: 1363P6-10R-E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 15-10S-W is determined by strict equivalence across the following critical parameters:

• Wire Gauge: 6 AWG (fixed requirement)
• Stud/Tab Size: #10 (fixed requirement)
• Terminal Type: Circular (fixed requirement)
• Termination Method: Crimp (fixed requirement)
• Contact Material: Copper (fixed requirement)
• Contact Finish: Tin (fixed requirement)
• Insulation: Non-Insulated (fixed requirement)
• RoHS Compliance: ROHS3 Compliant (regulatory requirement)

The Panduit Corp P6-10R-E meets all critical substitution criteria and is classified as a manufacturer-recommended equivalent. Dimensional variations (thickness and overall length) remain within acceptable tolerances for the application category and do not affect functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 15-10S-W and Panduit P6-10R-E are active products with ROHS3 compliance. Selection between these parts is based on availability and inventory requirements rather than functional differences. The 3M 15-10S-W is currently stocked at 710 pieces, while the Panduit P6-10R-E is available at 1,295 pieces. Both parts carry identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications, confirming regulatory equivalence for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: Can the Panduit P6-10R-E be used as a direct replacement for the 3M 15-10S-W?

A: Yes. Both parts meet identical specifications for wire gauge (6 AWG), stud size (#10), terminal type (circular), termination method (crimp), contact material (copper), contact finish (tin), and insulation status (non-insulated). Both are ROHS3 compliant and feature brazed seam construction.

Q: What are the dimensional differences between these parts?

A: The Panduit P6-10R-E has a thickness of 0.045" (1.14mm) compared to the 3M part at 0.050" (1.27mm). The overall length differs by 0.070" (1.77mm), with the Panduit part measuring 1.210" (30.73mm) versus the 3M part at 1.140" (28.96mm). The outer edge width is identical at 0.470" (11.94mm) for both parts.

Q: Are there packaging differences between the main part and substitute?

A: Both parts are supplied in bulk packaging. No special packaging requirements or restrictions apply to either part.

Q: Do both parts carry the same regulatory certifications?

A: Yes. Both the 3M 15-10S-W and Panduit P6-10R-E are ROHS3 compliant. The 3M part is classified as Moisture Sensitivity Level 1 (unlimited). The Panduit part lists MSL as Not Applicable and carries REACH Unaffected status.

Q: What is the basis for substitution between these parts?

A: Substitution is based on strict equivalence across critical electrical and mechanical parameters: wire gauge, stud size, terminal type, termination method, contact material, contact finish, insulation status, and regulatory compliance. Dimensional tolerances do not affect functional compatibility within the application category.