TE Connectivity AMP Connectors 1-50871-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-50871-0 is a pin receptacle connector designed for 0.050" to 0.057" pin diameters with solder termination and no tail configuration. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing procurement and design applications. The part features beryllium copper contacts with 30.0µin gold finish and operates across a temperature range of -65°C to 125°C.

Substiute Parts

1-50871-0

TE Connectivity AMP ConnectorsIn Stock: 11641-50871-0 Datasheet

Current PartRFQ

0362-0-15-01-23-27-10-0

Mill-Max Manufacturing Corp.In Stock: 7880362-0-15-01-23-27-10-0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1-50871-0 is determined by the following critical parameters:

Pin Acceptance Range: The main part accepts pins of 0.050" to 0.057" diameter. Substitute parts must accommodate this pin size range or provide overlapping acceptance specifications.

Connector Configuration: Both the main part and substitutes must feature pin receptacle design with no tail solder termination.

Contact Material and Finish: Beryllium copper contacts with gold plating at 30.0µin thickness establish the electrical and corrosion resistance baseline.

Operating Temperature: The -65°C to 125°C operating range defines the thermal performance requirement.

Termination Type: Solder termination is mandatory for direct substitution in existing circuit board designs.

The Mill-Max Manufacturing Corp. 0362-0-15-01-23-27-10-0 qualifies as a substitute because it accepts a wider pin diameter range (0.045" to 0.065") that encompasses the original specification, maintains identical contact material and finish specifications, and provides solder termination with no tail configuration.

Parameter Comparison

Engineering Selection Recommendations

For Obsolete Part Replacement: The Mill-Max 0362-0-15-01-23-27-10-0 is the active equivalent for the TE Connectivity 1-50871-0. The Mill-Max part maintains functional compatibility through overlapping pin diameter acceptance and identical contact material and finish specifications.

For RoHS Compliance Requirements: If RoHS3 compliance is mandated for new designs or procurement, the Mill-Max 0362-0-15-01-23-27-10-0 satisfies this requirement, whereas the original TE Connectivity part does not.

For Temperature Range Considerations: The original TE Connectivity part operates from -65°C to 125°C, while the Mill-Max substitute operates from -55°C to 125°C. Applications requiring operation below -55°C must retain the original part or identify alternative solutions.

For Existing Inventory: The TE Connectivity 1-50871-0 remains available with 1134 pieces in stock as new original inventory. The Mill-Max substitute has 777 pieces available in bulk packaging.

Frequently Asked Questions (FAQ)

Q: Can the Mill-Max 0362-0-15-01-23-27-10-0 directly replace the TE Connectivity 1-50871-0 in existing designs?

A: The Mill-Max part accepts a wider pin diameter range (0.045" to 0.065") that fully encompasses the original specification (0.050" to 0.057"). Both parts feature identical beryllium copper contacts with 30.0µin gold finish and solder termination. Direct substitution is mechanically and electrically compatible for applications using pins within the original 0.050" to 0.057" range.

Q: What is the difference in overall length between these parts?

A: The TE Connectivity 1-50871-0 measures 0.288" (7.32mm) overall length, while the Mill-Max 0362-0-15-01-23-27-10-0 measures 0.293" (7.44mm). This 0.005" (0.12mm) difference must be evaluated for board layout and mechanical clearance constraints.

Q: Are there temperature range limitations when substituting?

A: The original TE Connectivity part operates from -65°C to 125°C. The Mill-Max substitute operates from -55°C to 125°C. Applications requiring operation below -55°C cannot use the Mill-Max substitute without additional thermal analysis.

Q: What is the significance of the RoHS compliance difference?

A: The TE Connectivity 1-50871-0 is RoHS non-compliant, while the Mill-Max 0362-0-15-01-23-27-10-0 is ROHS3 compliant. For applications subject to RoHS regulations or customer requirements, the Mill-Max part satisfies compliance mandates.

Q: How do the mounting hole diameters compare?

A: The TE Connectivity part specifies a mounting hole diameter of 0.101" to 0.103" (2.57mm to 2.62mm), while the Mill-Max part specifies 0.102" (2.59mm). Both fall within compatible ranges for standard PCB mounting practices.

Q: Are both parts classified as unlimited moisture sensitivity?

A: Yes. Both the TE Connectivity 1-50871-0 and Mill-Max 0362-0-15-01-23-27-10-0 carry Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control requirements during storage, handling, or assembly.

Q: What is the socket depth specification for each part?

A: The TE Connectivity 1-50871-0 has a socket depth of 0.275" (6.99mm), while the Mill-Max 0362-0-15-01-23-27-10-0 has a socket depth of 0.293" (7.44mm). This difference affects pin insertion depth and must be considered in connector mating designs.