Equivalent & Substitute Parts for 150474K250HC

Part Overview

The 150474K250HC is a 0.47 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE) in the 150 series. This axial-mounted through-hole component operates at 250V DC with a polyester metallized dielectric and ±10% tolerance. The part is Active in product status and maintains full compliance with ROHS3 and REACH regulations. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

150474K250HC

Cornell Dubilier Electronics (CDE)In Stock: 817150474K250HC Datasheet

Current PartRFQ

WMF2P47K-F

Cornell Dubilier Electronics (CDE)In Stock: 3656WMF2P47K-F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 150474K250HC is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Capacitance: 0.47 µF
• Tolerance: ±10%
• Voltage Rating - DC: 250V

Material & Environmental Parameters (Must Match):

• Dielectric Material: Polyester
• Operating Temperature Range: -55°C ~ 125°C

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: Axial
• Termination: PC Pins

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The substitute part WMF2P47K-F meets all mandatory electrical, material, environmental, mechanical, and compliance requirements. Physical dimensions vary between the main part and substitute, which is permissible provided the application circuit board layout accommodates the larger package size.

Parameter Comparison

Engineering Selection Recommendations

Both the 150474K250HC and WMF2P47K-F are Active products manufactured by Cornell Dubilier Electronics and maintain full ROHS3 and REACH compliance. Selection between these parts is based on the following criteria:

Primary Part (150474K250HC): Select when the application circuit board layout is designed for the compact 9.50mm diameter axial package and when inventory from the 150 series is preferred.

Substitute Part (WMF2P47K-F): Select when the application accommodates the larger 15.50mm diameter axial package, when WMF series inventory is available, or when sourcing from alternative stock locations is required. The substitute part offers significantly higher inventory availability (3559 pieces versus 737 pieces).

Both parts deliver identical electrical performance and environmental ratings. The decision between them is determined by mechanical fit within the application and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can WMF2P47K-F be used as a direct replacement for 150474K250HC?

A: WMF2P47K-F is electrically and functionally equivalent to 150474K250HC. Both parts share identical capacitance (0.47 µF), tolerance (±10%), voltage rating (250V DC), dielectric material (polyester), operating temperature range (-55°C ~ 125°C), and compliance certifications (ROHS3, REACH). The primary difference is physical package size. Substitution is valid provided the application circuit board layout accommodates the larger 15.50mm diameter package of the WMF2P47K-F.

Q: What is the difference in physical dimensions between these parts?

A: The 150474K250HC measures 0.374" diameter by 0.807" length (9.50mm x 20.50mm). The WMF2P47K-F measures 0.610" diameter by 1.311" length (15.50mm x 33.30mm). Both are axial-mounted through-hole components with PC pin termination. Verify that the application circuit board has sufficient space for the larger substitute package before selection.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both 150474K250HC and WMF2P47K-F are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and use.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts carry Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.

Q: Can these parts be used interchangeably in all applications?

A: Electrical and environmental interchangeability is confirmed. Mechanical interchangeability depends on circuit board layout and available space for the axial package. The substitute part WMF2P47K-F is physically larger and requires verification of board-level fit before deployment.