150224-2000-RB-WD Equivalent & Substitute Parts

Part Overview

The 150224-2000-RB-WD is a 24-position rectangular receptacle connector manufactured by 3M, designed for surface mount applications with 0.079" (2.00mm) pitch. This connector features gold-plated mating contacts, push-pull fastening, and operates across -55°C to 105°C. The part is active in production and RoHS compliant. Equivalent parts may be required due to supply constraints, design revisions, or application-specific requirements such as operating temperature range, current rating, or insulation material compatibility.

Substiute Parts

150224-2000-RB-WD

3MIn Stock: 972150224-2000-RB-WD Datasheet

Current PartRFQ

A3-24DA-2SV(71)

Hirose Electric Co LtdIn Stock: 1285A3-24DA-2SV(71) Datasheet

MFR RecommendedRFQ

A3A-24DA-2SV(71)

Hirose Electric Co LtdIn Stock: 1003A3A-24DA-2SV(71) Datasheet

MFR RecommendedRFQ

TLE-112-01-G-DV-A

Samtec Inc.In Stock: 1179TLE-112-01-G-DV-A Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 150224-2000-RB-WD is determined by the following critical parameters:

• 24-position receptacle configuration with 0.079" (2.00mm) pitch and 2-row layout
• Surface mount solder termination with push-pull fastening
• Gold-plated mating contacts
• Operating temperature range compatibility
• Current and voltage rating requirements
• UL94 V-0 flammability compliance
• RoHS compliance status

The three substitute parts listed below meet the core mechanical and electrical interface requirements. Variations exist in operating temperature range, contact finish thickness, insulation material, and current rating per contact, which must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

A3-24DA-2SV(71) and A3A-24DA-2SV(71) (Hirose Electric Co Ltd)

Both Hirose A3 series parts maintain mechanical and electrical interface compatibility with the 150224-2000-RB-WD. These connectors are active production parts with RoHS compliance. The A3A-24DA-2SV(71) variant includes a board guide feature. Selection between these two should be based on PCB layout requirements. Note that the operating temperature range is limited to -55°C to 85°C, which is 20°C lower than the 3M part. Voltage rating is specified as 200VAC, which differs from the 500VDC rating of the main part. These differences must be evaluated against application requirements.

TLE-112-01-G-DV-A (Samtec Inc.)

The Samtec TLE-112-01-G-DV-A is a pass-through receptacle variant with identical pitch and position count. This part offers an extended operating temperature range of -55°C to 125°C and higher current rating of 3.2A per contact. The connector features a board guide and is manufactured from Liquid Crystal Polymer (LCP) insulation material. ROHS3 compliance is confirmed. This part is suitable for applications requiring higher current capacity or extended temperature operation. Voltage rating is not specified in the provided data.

All three substitute parts are active production items with MSL 1 rating and REACH unaffected status, supporting long-term availability and supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can A3-24DA-2SV(71) be used as a direct replacement for 150224-2000-RB-WD?

A: Mechanical and electrical interface compatibility is maintained. However, the operating temperature range is reduced to -55°C to 85°C. If your application operates within this temperature window and accepts 200VAC voltage rating, this part is suitable. Verify voltage and temperature requirements against your design specifications.

Q: What is the difference between A3-24DA-2SV(71) and A3A-24DA-2SV(71)?

A: Both parts are electrically and mechanically identical. The A3A variant includes a board guide feature for improved alignment during assembly. Select based on PCB layout and assembly process requirements.

Q: Why does TLE-112-01-G-DV-A have a higher current rating?

A: The TLE-112-01-G-DV-A is specified at 3.2A per contact compared to 1A for the main part. This is a design characteristic of the Samtec connector series and reflects the contact geometry and material composition. Use this part only if your application requires this higher current capacity.

Q: Are all substitute parts RoHS compliant?

A: Yes. The 150224-2000-RB-WD is RoHS Compliant. A3-24DA-2SV(71) is ROHS3 Compliant. A3A-24DA-2SV(71) is RoHS Compliant. TLE-112-01-G-DV-A is ROHS3 Compliant. All parts meet RoHS requirements.

Q: What packaging formats are available?

A: The 150224-2000-RB-WD is supplied in Tape & Reel (TR) format. Hirose A3 series parts are supplied in Tube packaging. Samtec TLE-112-01-G-DV-A is supplied in Tube packaging. Verify packaging compatibility with your procurement and assembly processes.

Q: Can I use TLE-112-01-G-DV-A in applications requiring 500VDC?

A: The TLE-112-01-G-DV-A voltage rating is not specified in the provided data. Contact the manufacturer for voltage rating specifications before selecting this part for high-voltage applications.

Q: What is the difference in contact finish thickness?

A: The 150224-2000-RB-WD has 30.0µin (0.76µm) gold plating on mating contacts. Hirose A3 parts have 8.00µin (0.203µm). Samtec TLE has 10.0µin (0.25µm). Thicker plating provides enhanced durability in high-cycle mating applications. Select based on expected connector mating cycles and environmental exposure.