Equivalent & Substitute Parts for Honeywell 14CE3-1K

Part Overview

The Honeywell 14CE3-1K is a snap action switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 5A at 250V AC. This component features a roller plunger actuator, chassis mount design, and IP66 ingress protection with 1-meter cable leads. The part is classified as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations.

Substiute Parts

14CE3-1K

Honeywell Sensing and Control EMEAIn Stock: 81814CE3-1K Datasheet

Current PartRFQ

14CE3-1

Honeywell Sensing and Control EMEAIn Stock: 81614CE3-1 Datasheet

DirectRFQ

D4C-1633

Omron Automation and SafetyIn Stock: 852D4C-1633 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 14CE3-1K is determined by the following critical parameters:

• Circuit configuration must be SPDT
• Switch function must be On-Momentary
• Current rating must support minimum 5A AC
• Voltage rating must support minimum 250V AC
• Actuator type must be roller plunger
• Mounting type must be chassis mount
• Termination must be cable leads
• Ingress protection must meet or exceed IP66
• Operating temperature range must encompass 0°C to 70°C
• Mechanical life must meet or exceed 10,000,000 cycles

Two substitute parts meet these criteria: the Honeywell 14CE3-1 (direct manufacturer variant) and the Omron D4C-1633 (cross-manufacturer equivalent).

Parameter Comparison

Engineering Selection Recommendations

The Honeywell 14CE3-1 is the primary substitute for the obsolete 14CE3-1K. Both components are manufactured by Honeywell and share identical electrical ratings, actuator type, mounting configuration, and mechanical life specifications. The 14CE3-1 maintains active product status and carries ROHS3 compliance certification. The primary difference is ingress protection rating (IP65 versus IP66), which represents a minor reduction in dust and water resistance.

The Omron D4C-1633 serves as a cross-manufacturer equivalent. This component meets all critical electrical and mechanical parameters while offering enhanced ingress protection (IP67), extended operating temperature range (-10°C to 70°C), and longer cable leads (3m versus 1m). The D4C-1633 includes DC voltage rating capability (4A at 30V DC) not present in the Honeywell variants. Mechanical differences include higher operating force (1800gf versus 2300gf) and greater operating position displacement (1.350" versus 1.122").

Both substitute parts carry ROHS3 compliance and are currently in active production status with confirmed inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the 14CE3-1 directly replace the 14CE3-1K in all applications?

A: The 14CE3-1 is functionally equivalent for applications requiring 5A at 250V AC with SPDT switching. The ingress protection rating difference (IP65 versus IP66) should be evaluated based on environmental exposure requirements. Both components share identical electrical ratings, actuator characteristics, and mechanical life specifications.

Q: What are the key differences between the Honeywell 14CE3-1 and Omron D4C-1633?

A: The primary differences are ingress protection (IP67 for D4C-1633 versus IP65 for 14CE3-1), operating force (1800gf versus 1200gf), operating position displacement (1.350" versus 1.122"), cable length (3m versus 1m), and operating temperature range (-10°C to 70°C for D4C-1633 versus 0°C to 70°C for 14CE3-1). Both maintain 5A at 250V AC rating and 10,000,000 cycle mechanical life.

Q: Is the Omron D4C-1633 suitable for applications requiring the exact operating force of the 14CE3-1K?

A: No. The 14CE3-1K specifies 2300gf operating force, while the D4C-1633 operates at 1800gf. Applications with force-sensitive actuation requirements must account for this 500gf difference.

Q: Are there packaging considerations when substituting these components?

A: The 14CE3-1K was supplied with cable leads in a specific configuration. The 14CE3-1 is available in bulk packaging, and the D4C-1633 is also bulk packaged. Verify cable lead gauge, length, and connector compatibility with your application before implementation.

Q: Do all substitute parts meet current compliance requirements?

A: Yes. Both the 14CE3-1 and D4C-1633 carry ROHS3 compliance certification. The D4C-1633 additionally carries REACH Unaffected status. Both components are suitable for applications requiring current regulatory compliance.