TE Connectivity AMP Connectors 1-499913-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-499913-0 is a rectangular connector header, right-angle configuration, with 50 positions at 2.54mm pitch. This through-hole, shrouded connector is designed for board-to-cable/wire applications with solder termination and latch lock/eject hook fastening. The part is currently active in production and available in tray packaging with 669 pieces in stock.

Substitute parts are necessary when tray packaging is unavailable, when bulk quantities are required, when RoHS compliance is mandated, or when alternative manufacturers' components meet the same electrical and mechanical specifications for system integration.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	50
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Operating Temperature	-65°C ~ 105°C
Material Flammability Rating	UL94 V-0
Current Rating	1A per Contact
Voltage Rating	250VAC

Substitute Part Grouping Explanation

Substitution of rectangular connectors in the 50-position, 2.54mm pitch category is determined by the following critical parameters:

Electrical Compatibility:

Pitch - Mating: 0.100" (2.54mm) — must be identical
Number of Positions: 50 — must be identical
Number of Rows: 2 — must be identical
Row Spacing - Mating: 0.100" (2.54mm) — must be identical
Contact Type: Male Pin — must be identical
Voltage Rating: 250VAC — must be met or exceeded
Current Rating: 1A per Contact — must be met or exceeded

Mechanical Compatibility:

Connector Type: Header — must be identical
Mounting Type: Through Hole, Right Angle — must be identical
Shrouding: Shrouded - 4 Wall — must be identical
Termination: Solder — must be identical
Contact Shape: Square — must be identical
Material Flammability Rating: UL94 V-0 — must be met or exceeded

Packaging and Compliance:

Packaging format (Tray, Bulk, Tube) — interchangeable based on procurement requirements
RoHS Status — may differ; RoHS Compliant parts are acceptable substitutes for RoHS non-compliant parts in new designs
REACH Status — may differ; REACH Unaffected parts are acceptable substitutes

All substitute parts listed meet or exceed the electrical and mechanical parameters of the primary part 1-499913-0.

Parameter Comparison

Part Number	Manufacturer	Series	Packaging	Pitch (mm)	Positions	Rows	Mounting	Fastening Type	Contact Length - Mating (mm)	Contact Length - Post (mm)	Insulation Height (mm)	Operating Temp (°C)	Current Rating (A)	Voltage Rating (VAC)	RoHS Status
1-499913-0	TE Connectivity AMP	AMP-Latch	Tray	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Short	6.10	2.79	8.00	-65 ~ 105	1	250	Non-compliant
1-5499913-0	TE Connectivity AMP	AMP-Latch	Bulk	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Short	6.10	2.79	8.00	-65 ~ 105	1	250	Compliant
09185506901	HARTING	SEK	Tray	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Long	6.10	4.50	8.51	-55 ~ 125	—	—	ROHS3 Compliant
09185506903	HARTING	SEK	Tray	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Long	6.10	2.90	8.51	-55 ~ 125	—	—	ROHS3 Compliant
09185506913	HARTING	SEK	Bulk	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Short	6.10	2.90	8.51	-55 ~ 125	—	—	ROHS3 Compliant
09195506913	HARTING	SEK	Bulk	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Short	6.10	2.90	8.51	-55 ~ 125	—	—	ROHS3 Compliant
71922-150LF	Amphenol ICC (FCI)	Quickie™	Tube	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks	5.80	2.90	8.61	—	—	—	Compliant
D3433-5302-AR	3M	D3000	Tray	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Long	6.10	2.84	8.64	-55 ~ 105	1.75	—	ROHS3 Compliant
N3433-5202RB	3M	3000	Bulk	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Short	6.10	2.84	8.64	-55 ~ 105	1.75	—	Compliant
N3433-5302RB	3M	3000	Bulk	2.54	50	2	Through Hole, Right Angle	Latch Lock/Eject Hooks, Long	6.10	2.84	8.64	-55 ~ 105	1.75	—	Compliant

Engineering Selection Recommendations

Direct Equivalent (Same Manufacturer):

The part 1-5499913-0 from TE Connectivity AMP Connectors is the direct equivalent to 1-499913-0. Both parts share identical electrical and mechanical specifications with the primary difference being packaging format (Bulk versus Tray) and RoHS compliance status. The 1-5499913-0 is RoHS Compliant, making it suitable for applications requiring regulatory compliance with modern environmental standards.

Cross-Manufacturer Substitutes:

HARTING SEK series connectors (09185506901, 09185506903, 09185506913, 09195506913) are functionally equivalent across all critical parameters. These parts are ROHS3 Compliant and offer extended operating temperature range (-55°C to 125°C versus -65°C to 105°C). Contact post lengths vary between 2.90mm and 4.50mm, accommodating different PCB thicknesses. All HARTING parts feature copper alloy contacts with glass-filled insulation materials.

Amphenol ICC (FCI) 71922-150LF (Quickie™ series) is a tube-packaged alternative with RoHS Compliance. This part features phosphor bronze contacts with gold GXT™ finish and thermoplastic glass-filled insulation. Contact mating length is 5.80mm compared to 6.10mm in the primary part.

3M D3000 and 3000 series connectors (D3433-5302-AR, N3433-5202RB, N3433-5302RB) are functionally equivalent with higher current ratings (1.75A per contact versus 1A). These parts are RoHS Compliant or ROHS3 Compliant and feature copper alloy or brass contacts with PCT/polyester glass-filled insulation. Operating temperature range is -55°C to 105°C.

Compliance Considerations:

For new designs requiring RoHS compliance, substitute parts 1-5499913-0, 09185506913, 09195506913, 71922-150LF, D3433-5302-AR, N3433-5202RB, and N3433-5302RB are appropriate selections. The primary part 1-499913-0 is RoHS non-compliant and REACH Affected, limiting its use in regulated applications.

All substitute parts maintain UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity level, ensuring compatibility with standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can I substitute 1-5499913-0 for 1-499913-0 in existing designs?

A: Yes. Both parts are manufactured by TE Connectivity AMP Connectors and share identical electrical and mechanical specifications. The primary difference is packaging (Bulk versus Tray) and RoHS compliance status. Electrical performance, mating characteristics, and physical dimensions are equivalent. Substitution is direct.

Q: What is the difference between HARTING 09185506913 and 09185506903?

A: Both are HARTING SEK series connectors with identical pitch, position count, and mounting configuration. The primary difference is contact post length: 09185506913 has 2.90mm post length with short fastening hooks, while 09185506903 has 2.90mm post length with long fastening hooks. Post length selection depends on PCB thickness requirements. Both are ROHS3 Compliant.

Q: Are 3M N3433-5302RB and N3433-5202RB interchangeable?

A: Both are 3M 3000 series connectors with identical electrical and mechanical specifications. The primary difference is fastening type: N3433-5302RB features long latch lock/eject hooks, while N3433-5202RB features short hooks. Both offer 1.75A current rating per contact and are RoHS Compliant. Selection depends on fastening preference and application requirements.

Q: What packaging options are available for 50-position 2.54mm pitch headers?

A: Available packaging formats include Tray (1-499913-0, 09185506901, 09185506903, 09185507913, D3433-5302-AR), Bulk (1-5499913-0, 09185506913, 09195506913, N3433-5202RB, N3433-5302RB), and Tube (71922-150LF). Packaging selection depends on procurement volume and handling requirements. Electrical and mechanical specifications remain identical across packaging formats.

Q: Does operating temperature range affect substitution compatibility?

A: Operating temperature range is a specification parameter but does not prevent substitution. The primary part operates -65°C to 105°C. HARTING and 3M substitutes operate -55°C to 125°C, providing extended temperature capability. If the application requires the full -65°C lower limit, the primary part or equivalent TE Connectivity parts are required. For applications within -55°C to 105°C range, all listed substitutes are compatible.

Q: What is the significance of contact post length variation?

A: Contact post length (ranging from 2.79mm to 4.50mm across listed parts) determines compatibility with different PCB thicknesses. Longer posts accommodate thicker PCBs or multiple stacked boards. Shorter posts are suitable for standard PCB thicknesses. Post length selection must match the specific application's PCB thickness requirements. Mating characteristics and electrical performance are independent of post length variation.

Q: Are HARTING and 3M connectors mechanically compatible with TE Connectivity AMP-Latch series?

A: HARTING SEK and 3M D3000/3000 series connectors are mechanically and electrically compatible with TE Connectivity AMP-Latch series across all critical parameters: pitch, position count, row spacing, shrouding, mounting type, and termination method. Physical dimensions vary slightly (insulation height ranges from 8.00mm to 8.64mm), but these variations do not affect mating compatibility or board-level integration.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant status?

A: RoHS Compliant indicates compliance with the original Restriction of Hazardous Substances Directive. ROHS3 Compliant indicates compliance with RoHS 3 (Directive 2015/863/EU), which includes additional restricted substances. Both statuses indicate environmental compliance. ROHS3 Compliant parts meet more stringent requirements and are suitable for all applications requiring RoHS compliance.

Q: Can I use 71922-150LF (Amphenol ICC) as a direct replacement for 1-499913-0?

A: 71922-150LF is functionally equivalent across critical electrical and mechanical parameters but differs in contact mating length (5.80mm versus 6.10mm) and packaging format (Tube versus Tray). These differences do not affect mating compatibility or electrical performance. Substitution is compatible for applications where tube packaging is acceptable and the slightly shorter contact mating length does not create clearance issues.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message